blob: f6ebeee1b99a793180e94127831b6f8608357ac2 [file] [log] [blame]
/*
* Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef STM32MP1_DEF_H
#define STM32MP1_DEF_H
#include <common/tbbr/tbbr_img_def.h>
#include <drivers/st/stm32mp1_rcc.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
#include <lib/utils_def.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
#ifndef __ASSEMBLY__
#include <drivers/st/stm32mp1_clk.h>
#include <boot_api.h>
#include <stm32mp_common.h>
#include <stm32mp_dt.h>
#include <stm32mp_shres_helpers.h>
#include <stm32mp1_private.h>
#endif
/*******************************************************************************
* STM32MP1 memory map related constants
******************************************************************************/
#define STM32MP_SYSRAM_BASE U(0x2FFC0000)
#define STM32MP_SYSRAM_SIZE U(0x00040000)
/* DDR configuration */
#define STM32MP_DDR_BASE U(0xC0000000)
#define STM32MP_DDR_MAX_SIZE U(0x40000000) /* Max 1GB */
/* DDR power initializations */
#ifndef __ASSEMBLY__
enum ddr_type {
STM32MP_DDR3,
STM32MP_LPDDR2,
};
#endif
/* Section used inside TF binaries */
#define STM32MP_PARAM_LOAD_SIZE U(0x00002400) /* 9 Ko for param */
/* 256 Octets reserved for header */
#define STM32MP_HEADER_SIZE U(0x00000100)
#define STM32MP_BINARY_BASE (STM32MP_SYSRAM_BASE + \
STM32MP_PARAM_LOAD_SIZE + \
STM32MP_HEADER_SIZE)
#define STM32MP_BINARY_SIZE (STM32MP_SYSRAM_SIZE - \
(STM32MP_PARAM_LOAD_SIZE + \
STM32MP_HEADER_SIZE))
#if STACK_PROTECTOR_ENABLED
#define STM32MP_BL32_SIZE U(0x00012000) /* 72 Ko for BL32 */
#else
#define STM32MP_BL32_SIZE U(0x00011000) /* 68 Ko for BL32 */
#endif
#define STM32MP_BL32_BASE (STM32MP_SYSRAM_BASE + \
STM32MP_SYSRAM_SIZE - \
STM32MP_BL32_SIZE)
#if STACK_PROTECTOR_ENABLED
#define STM32MP_BL2_SIZE U(0x00015000) /* 84 Ko for BL2 */
#else
#define STM32MP_BL2_SIZE U(0x00013000) /* 76 Ko for BL2 */
#endif
#define STM32MP_BL2_BASE (STM32MP_BL32_BASE - \
STM32MP_BL2_SIZE)
/* BL2 and BL32/sp_min require 5 tables */
#define MAX_XLAT_TABLES 5
/*
* MAX_MMAP_REGIONS is usually:
* BL stm32mp1_mmap size + mmap regions in *_plat_arch_setup
*/
#if defined(IMAGE_BL2)
#define MAX_MMAP_REGIONS 11
#endif
#if defined(IMAGE_BL32)
#define MAX_MMAP_REGIONS 6
#endif
/* DTB initialization value */
#define STM32MP_DTB_SIZE U(0x00004000) /* 16Ko for DTB */
#define STM32MP_DTB_BASE (STM32MP_BL2_BASE - \
STM32MP_DTB_SIZE)
#define STM32MP_BL33_BASE (STM32MP_DDR_BASE + U(0x100000))
/*******************************************************************************
* STM32MP1 device/io map related constants (used for MMU)
******************************************************************************/
#define STM32MP1_DEVICE1_BASE U(0x40000000)
#define STM32MP1_DEVICE1_SIZE U(0x40000000)
#define STM32MP1_DEVICE2_BASE U(0x80000000)
#define STM32MP1_DEVICE2_SIZE U(0x40000000)
/*******************************************************************************
* STM32MP1 RCC
******************************************************************************/
#define RCC_BASE U(0x50000000)
/*******************************************************************************
* STM32MP1 PWR
******************************************************************************/
#define PWR_BASE U(0x50001000)
/*******************************************************************************
* STM32MP1 GPIO
******************************************************************************/
#define GPIOA_BASE U(0x50002000)
#define GPIOB_BASE U(0x50003000)
#define GPIOC_BASE U(0x50004000)
#define GPIOD_BASE U(0x50005000)
#define GPIOE_BASE U(0x50006000)
#define GPIOF_BASE U(0x50007000)
#define GPIOG_BASE U(0x50008000)
#define GPIOH_BASE U(0x50009000)
#define GPIOI_BASE U(0x5000A000)
#define GPIOJ_BASE U(0x5000B000)
#define GPIOK_BASE U(0x5000C000)
#define GPIOZ_BASE U(0x54004000)
#define GPIO_BANK_OFFSET U(0x1000)
/* Bank IDs used in GPIO driver API */
#define GPIO_BANK_A U(0)
#define GPIO_BANK_B U(1)
#define GPIO_BANK_C U(2)
#define GPIO_BANK_D U(3)
#define GPIO_BANK_E U(4)
#define GPIO_BANK_F U(5)
#define GPIO_BANK_G U(6)
#define GPIO_BANK_H U(7)
#define GPIO_BANK_I U(8)
#define GPIO_BANK_J U(9)
#define GPIO_BANK_K U(10)
#define GPIO_BANK_Z U(25)
#define STM32MP_GPIOZ_PIN_MAX_COUNT 8
/*******************************************************************************
* STM32MP1 UART
******************************************************************************/
#define USART1_BASE U(0x5C000000)
#define USART2_BASE U(0x4000E000)
#define USART3_BASE U(0x4000F000)
#define UART4_BASE U(0x40010000)
#define UART5_BASE U(0x40011000)
#define USART6_BASE U(0x44003000)
#define UART7_BASE U(0x40018000)
#define UART8_BASE U(0x40019000)
#define STM32MP_UART_BAUDRATE U(115200)
/* For UART crash console */
#define STM32MP_DEBUG_USART_BASE UART4_BASE
/* UART4 on HSI@64MHz, TX on GPIOG11 Alternate 6 */
#define STM32MP_DEBUG_USART_CLK_FRQ 64000000
#define DEBUG_UART_TX_GPIO_BANK_ADDRESS GPIOG_BASE
#define DEBUG_UART_TX_GPIO_BANK_CLK_REG RCC_MP_AHB4ENSETR
#define DEBUG_UART_TX_GPIO_BANK_CLK_EN RCC_MP_AHB4ENSETR_GPIOGEN
#define DEBUG_UART_TX_GPIO_PORT 11
#define DEBUG_UART_TX_GPIO_ALTERNATE 6
#define DEBUG_UART_TX_CLKSRC_REG RCC_UART24CKSELR
#define DEBUG_UART_TX_CLKSRC RCC_UART24CKSELR_HSI
#define DEBUG_UART_TX_EN_REG RCC_MP_APB1ENSETR
#define DEBUG_UART_TX_EN RCC_MP_APB1ENSETR_UART4EN
/*******************************************************************************
* STM32MP1 TZC (TZ400)
******************************************************************************/
#define STM32MP1_TZC_BASE U(0x5C006000)
#define STM32MP1_TZC_A7_ID U(0)
#define STM32MP1_TZC_M4_ID U(1)
#define STM32MP1_TZC_LCD_ID U(3)
#define STM32MP1_TZC_GPU_ID U(4)
#define STM32MP1_TZC_MDMA_ID U(5)
#define STM32MP1_TZC_DMA_ID U(6)
#define STM32MP1_TZC_USB_HOST_ID U(7)
#define STM32MP1_TZC_USB_OTG_ID U(8)
#define STM32MP1_TZC_SDMMC_ID U(9)
#define STM32MP1_TZC_ETH_ID U(10)
#define STM32MP1_TZC_DAP_ID U(15)
#define STM32MP1_FILTER_BIT_ALL U(3)
/*******************************************************************************
* STM32MP1 SDMMC
******************************************************************************/
#define STM32MP_SDMMC1_BASE U(0x58005000)
#define STM32MP_SDMMC2_BASE U(0x58007000)
#define STM32MP_SDMMC3_BASE U(0x48004000)
#define STM32MP_MMC_INIT_FREQ 400000 /*400 KHz*/
#define STM32MP_SD_NORMAL_SPEED_MAX_FREQ 25000000 /*25 MHz*/
#define STM32MP_SD_HIGH_SPEED_MAX_FREQ 50000000 /*50 MHz*/
#define STM32MP_EMMC_NORMAL_SPEED_MAX_FREQ 26000000 /*26 MHz*/
#define STM32MP_EMMC_HIGH_SPEED_MAX_FREQ 52000000 /*52 MHz*/
/*******************************************************************************
* STM32MP1 BSEC / OTP
******************************************************************************/
#define STM32MP1_OTP_MAX_ID 0x5FU
#define STM32MP1_UPPER_OTP_START 0x20U
#define OTP_MAX_SIZE (STM32MP1_OTP_MAX_ID + 1U)
/* OTP offsets */
#define DATA0_OTP U(0)
/* OTP mask */
/* DATA0 */
#define DATA0_OTP_SECURED BIT(6)
/*******************************************************************************
* STM32MP1 TAMP
******************************************************************************/
#define TAMP_BASE U(0x5C00A000)
#define TAMP_BKP_REGISTER_BASE (TAMP_BASE + U(0x100))
#if !(defined(__LINKER__) || defined(__ASSEMBLY__))
static inline uint32_t tamp_bkpr(uint32_t idx)
{
return TAMP_BKP_REGISTER_BASE + (idx << 2);
}
#endif
/*******************************************************************************
* STM32MP1 DDRCTRL
******************************************************************************/
#define DDRCTRL_BASE U(0x5A003000)
/*******************************************************************************
* STM32MP1 DDRPHYC
******************************************************************************/
#define DDRPHYC_BASE U(0x5A004000)
/*******************************************************************************
* STM32MP1 I2C4
******************************************************************************/
#define I2C4_BASE U(0x5C002000)
/*******************************************************************************
* Device Tree defines
******************************************************************************/
#define DT_PWR_COMPAT "st,stm32mp1-pwr"
#define DT_RCC_CLK_COMPAT "st,stm32mp1-rcc"
#endif /* STM32MP1_DEF_H */