blob: cb75bf6544143f10c530380f1cee4ef35166bcfd [file] [log] [blame]
/*
* Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <stdbool.h>
#include <arch_helpers.h>
#include <common/debug.h>
#include <lib/el3_runtime/cpu_data.h>
#include <lib/psci/psci.h>
#include <plat/common/platform.h>
#include <k3_gicv3.h>
#include <ti_sci.h>
/* Need to flush psci internal locks before shutdown or their values are lost */
#include "../../../../lib/psci/psci_private.h"
#define STUB() ERROR("stub %s called\n", __func__)
uintptr_t k3_sec_entrypoint;
static void k3_cpu_standby(plat_local_state_t cpu_state)
{
unsigned int scr;
scr = read_scr_el3();
/* Enable the Non secure interrupt to wake the CPU */
write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
isb();
/* dsb is good practice before using wfi to enter low power states */
dsb();
/* Enter standby state */
wfi();
/* Restore SCR */
write_scr_el3(scr);
}
static int k3_pwr_domain_on(u_register_t mpidr)
{
int core_id, proc, device, ret;
core_id = plat_core_pos_by_mpidr(mpidr);
if (core_id < 0) {
ERROR("Could not get target core id: %d\n", core_id);
return PSCI_E_INTERN_FAIL;
}
proc = PLAT_PROC_START_ID + core_id;
device = PLAT_PROC_DEVICE_START_ID + core_id;
ret = ti_sci_proc_request(proc);
if (ret) {
ERROR("Request for processor failed: %d\n", ret);
return PSCI_E_INTERN_FAIL;
}
ret = ti_sci_proc_set_boot_cfg(proc, k3_sec_entrypoint, 0, 0);
if (ret) {
ERROR("Request to set core boot address failed: %d\n", ret);
return PSCI_E_INTERN_FAIL;
}
ret = ti_sci_device_get(device);
if (ret) {
ERROR("Request to start core failed: %d\n", ret);
return PSCI_E_INTERN_FAIL;
}
ret = ti_sci_proc_release(proc);
if (ret) {
/* this is not fatal */
WARN("Could not release processor control: %d\n", ret);
}
return PSCI_E_SUCCESS;
}
void k3_pwr_domain_off(const psci_power_state_t *target_state)
{
int core_id, device, ret;
/* Prevent interrupts from spuriously waking up this cpu */
k3_gic_cpuif_disable();
core_id = plat_my_core_pos();
device = PLAT_PROC_DEVICE_START_ID + core_id;
ret = ti_sci_device_put(device);
if (ret) {
ERROR("Request to stop core failed: %d\n", ret);
return;
}
}
void k3_pwr_domain_on_finish(const psci_power_state_t *target_state)
{
/* TODO: Indicate to System firmware about completion */
k3_gic_pcpu_init();
k3_gic_cpuif_enable();
}
static void __dead2 k3_pwr_domain_pwr_down_wfi(const psci_power_state_t
*target_state)
{
flush_cpu_data(psci_svc_cpu_data);
flush_dcache_range((uintptr_t) psci_locks, sizeof(psci_locks));
psci_power_down_wfi();
}
static void __dead2 k3_system_reset(void)
{
/* Send the system reset request to system firmware */
ti_sci_core_reboot();
while (true)
wfi();
}
static int k3_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
/* TODO: perform the proper validation */
return PSCI_E_SUCCESS;
}
static int k3_validate_ns_entrypoint(uintptr_t entrypoint)
{
/* TODO: perform the proper validation */
return PSCI_E_SUCCESS;
}
static const plat_psci_ops_t k3_plat_psci_ops = {
.cpu_standby = k3_cpu_standby,
.pwr_domain_on = k3_pwr_domain_on,
.pwr_domain_off = k3_pwr_domain_off,
.pwr_domain_on_finish = k3_pwr_domain_on_finish,
.pwr_domain_pwr_down_wfi = k3_pwr_domain_pwr_down_wfi,
.system_reset = k3_system_reset,
.validate_power_state = k3_validate_power_state,
.validate_ns_entrypoint = k3_validate_ns_entrypoint
};
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
const plat_psci_ops_t **psci_ops)
{
k3_sec_entrypoint = sec_entrypoint;
*psci_ops = &k3_plat_psci_ops;
return 0;
}