blob: 61c587f4f1d0e899701cbe1d7258c5f22d3bdd21 [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <platform_def.h>
#include <arch.h>
#include <asm_macros.S>
#include <common/bl_common.h>
#include <drivers/st/stm32_gpio.h>
#include <drivers/st/stm32mp1_rcc.h>
#define GPIO_BANK_G_ADDRESS 0x50008000
#define GPIO_TX_PORT 11
#define GPIO_TX_SHIFT (GPIO_TX_PORT << 1)
#define GPIO_TX_ALT_SHIFT ((GPIO_TX_PORT - GPIO_ALT_LOWER_LIMIT) << 2)
#define STM32MP1_HSI_CLK 64000000
.globl platform_mem_init
.globl plat_report_exception
.globl plat_get_my_entrypoint
.globl plat_secondary_cold_boot_setup
.globl plat_reset_handler
.globl plat_is_my_cpu_primary
.globl plat_my_core_pos
.globl plat_crash_console_init
.globl plat_crash_console_flush
.globl plat_crash_console_putc
.globl plat_panic_handler
func platform_mem_init
/* Nothing to do, don't need to init SYSRAM */
bx lr
endfunc platform_mem_init
func plat_report_exception
bx lr
endfunc plat_report_exception
func plat_reset_handler
bx lr
endfunc plat_reset_handler
/* ------------------------------------------------------------------
* unsigned long plat_get_my_entrypoint (void);
*
* Main job of this routine is to distinguish between a cold and warm
* boot.
*
* Currently supports only cold boot
* ------------------------------------------------------------------
*/
func plat_get_my_entrypoint
mov r0, #0
bx lr
endfunc plat_get_my_entrypoint
/* ---------------------------------------------
* void plat_secondary_cold_boot_setup (void);
*
* Cold-booting secondary CPUs is not supported.
* ---------------------------------------------
*/
func plat_secondary_cold_boot_setup
b .
endfunc plat_secondary_cold_boot_setup
/* -----------------------------------------------------
* unsigned int plat_is_my_cpu_primary (void);
*
* Find out whether the current cpu is the primary cpu.
* -----------------------------------------------------
*/
func plat_is_my_cpu_primary
ldcopr r0, MPIDR
ldr r1, =(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
and r0, r1
cmp r0, #STM32MP1_PRIMARY_CPU
moveq r0, #1
movne r0, #0
bx lr
endfunc plat_is_my_cpu_primary
/* -------------------------------------------
* int plat_stm32mp1_get_core_pos(int mpidr);
*
* Return CorePos = (ClusterId * 4) + CoreId
* -------------------------------------------
*/
func plat_stm32mp1_get_core_pos
and r1, r0, #MPIDR_CPU_MASK
and r0, r0, #MPIDR_CLUSTER_MASK
add r0, r1, r0, LSR #6
bx lr
endfunc plat_stm32mp1_get_core_pos
/* ------------------------------------
* unsigned int plat_my_core_pos(void)
* ------------------------------------
*/
func plat_my_core_pos
ldcopr r0, MPIDR
b plat_stm32mp1_get_core_pos
endfunc plat_my_core_pos
/* ---------------------------------------------
* int plat_crash_console_init(void)
*
* Initialize the crash console without a C Runtime stack.
* ---------------------------------------------
*/
func plat_crash_console_init
/* Enable GPIOs for UART4 TX */
ldr r1, =(RCC_BASE + RCC_MP_AHB4ENSETR)
ldr r2, [r1]
/* Configure GPIO G11 */
orr r2, r2, #RCC_MP_AHB4ENSETR_GPIOGEN
str r2, [r1]
ldr r1, =GPIO_BANK_G_ADDRESS
/* Set GPIO mode alternate */
ldr r2, [r1, #GPIO_MODE_OFFSET]
bic r2, r2, #(GPIO_MODE_MASK << GPIO_TX_SHIFT)
orr r2, r2, #(GPIO_MODE_ALTERNATE << GPIO_TX_SHIFT)
str r2, [r1, #GPIO_MODE_OFFSET]
/* Set GPIO speed low */
ldr r2, [r1, #GPIO_SPEED_OFFSET]
bic r2, r2, #(GPIO_SPEED_MASK << GPIO_TX_SHIFT)
str r2, [r1, #GPIO_SPEED_OFFSET]
/* Set no-pull */
ldr r2, [r1, #GPIO_PUPD_OFFSET]
bic r2, r2, #(GPIO_PULL_MASK << GPIO_TX_SHIFT)
str r2, [r1, #GPIO_PUPD_OFFSET]
/* Set alternate AF6 */
ldr r2, [r1, #GPIO_AFRH_OFFSET]
bic r2, r2, #(GPIO_ALTERNATE_MASK << GPIO_TX_ALT_SHIFT)
orr r2, r2, #(GPIO_ALTERNATE_6 << GPIO_TX_ALT_SHIFT)
str r2, [r1, #GPIO_AFRH_OFFSET]
/* Enable UART clock, with HSI source */
ldr r1, =(RCC_BASE + RCC_UART24CKSELR)
mov r2, #RCC_UART24CKSELR_HSI
str r2, [r1]
ldr r1, =(RCC_BASE + RCC_MP_APB1ENSETR)
ldr r2, [r1]
orr r2, r2, #RCC_MP_APB1ENSETR_UART4EN
str r2, [r1]
ldr r0, =STM32MP1_DEBUG_USART_BASE
ldr r1, =STM32MP1_HSI_CLK
ldr r2, =STM32MP1_UART_BAUDRATE
b console_stm32_core_init
endfunc plat_crash_console_init
/* ---------------------------------------------
* int plat_crash_console_flush(void)
*
* Flush the crash console without a C Runtime stack.
* ---------------------------------------------
*/
func plat_crash_console_flush
ldr r1, =STM32MP1_DEBUG_USART_BASE
b console_stm32_core_flush
endfunc plat_crash_console_flush
/* ---------------------------------------------
* int plat_crash_console_putc(int c)
*
* Print a character on the crash console without a C Runtime stack.
* Clobber list : r1 - r3
*
* In case of bootloading through uart, we keep console crash as this.
* Characters could be sent to the programmer, but will be ignored.
* No specific code in that case.
* ---------------------------------------------
*/
func plat_crash_console_putc
ldr r1, =STM32MP1_DEBUG_USART_BASE
b console_stm32_core_putc
endfunc plat_crash_console_putc