blob: d98f53cb1fbdecf27916f2ff7b1298db924c6410 [file] [log] [blame]
/*
* Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef PMU_H
#define PMU_H
#include <soc.h>
struct rk3328_sleep_ddr_data {
uint32_t pmu_debug_enable;
uint32_t debug_iomux_save;
uint32_t pmic_sleep_save;
uint32_t pmu_wakeup_conf0;
uint32_t pmu_pwrmd_com;
uint32_t cru_mode_save;
uint32_t clk_sel0, clk_sel1, clk_sel18,
clk_sel20, clk_sel24, clk_sel38;
uint32_t clk_ungt_save[CRU_CLKGATE_NUMS];
uint32_t cru_plls_con_save[MAX_PLL][CRU_PLL_CON_NUMS];
};
struct rk3328_sleep_sram_data {
uint32_t pmic_sleep_save;
uint32_t pmic_sleep_gpio_save[2];
uint32_t ddr_grf_con0;
uint32_t dpll_con_save[CRU_PLL_CON_NUMS];
uint32_t pd_sr_idle_save;
uint32_t uart2_ier;
};
/*****************************************************************************
* The ways of cores power domain contorlling
*****************************************************************************/
enum cores_pm_ctr_mode {
core_pwr_pd = 0,
core_pwr_wfi = 1,
core_pwr_wfi_int = 2
};
enum pmu_cores_pm_by_wfi {
core_pm_en = 0,
core_pm_int_wakeup_en,
core_pm_dis_int,
core_pm_sft_wakeup_en
};
extern void *pmu_cpuson_entrypoint_start;
extern void *pmu_cpuson_entrypoint_end;
extern uint64_t cpuson_entry_point[PLATFORM_CORE_COUNT];
extern uint32_t cpuson_flags[PLATFORM_CORE_COUNT];
#define CORES_PM_DISABLE 0x0
/*****************************************************************************
* pmu con,reg
*****************************************************************************/
#define PMU_WAKEUP_CFG0 0x00
#define PMU_PWRDN_CON 0x0c
#define PMU_PWRDN_ST 0x10
#define PMU_PWRMD_COM 0x18
#define PMU_SFT_CON 0x1c
#define PMU_INT_CON 0x20
#define PMU_INT_ST 0x24
#define PMU_POWER_ST 0x44
#define PMU_CPUAPM_CON(n) (0x80 + (n) * 4)
#define PMU_SYS_REG(n) (0xa0 + (n) * 4)
#define CHECK_CPU_WFIE_BASE (GRF_BASE + GRF_CPU_STATUS(1))
enum pmu_core_pwrst_shift {
clst_cpu_wfe = 0,
clst_cpu_wfi = 4,
};
#define clstl_cpu_wfe (clst_cpu_wfe)
#define clstb_cpu_wfe (clst_cpu_wfe)
enum pmu_pd_id {
PD_CPU0 = 0,
PD_CPU1,
PD_CPU2,
PD_CPU3,
};
enum pmu_power_mode_common {
pmu_mode_en = 0,
sref_enter_en,
global_int_disable_cfg,
cpu0_pd_en,
wait_wakeup_begin_cfg = 4,
l2_flush_en,
l2_idle_en,
ddrio_ret_de_req,
ddrio_ret_en = 8,
};
enum pmu_sft_con {
upctl_c_sysreq_cfg = 0,
l2flushreq_req,
ddr_io_ret_cfg,
pmu_sft_ret_cfg,
};
#define CKECK_WFE_MSK 0x1
#define CKECK_WFI_MSK 0x10
#define CKECK_WFEI_MSK 0x11
#define PD_CTR_LOOP 500
#define CHK_CPU_LOOP 500
#define MAX_WAIT_CONUT 1000
#define WAKEUP_INT_CLUSTER_EN 0x1
#define PMIC_SLEEP_REG 0x34
#define PLL_IS_NORM_MODE(mode, pll_id) \
((mode & (PLL_NORM_MODE(pll_id)) & 0xffff) != 0)
#define CTLR_ENABLE_G1_BIT BIT(1)
#define UART_FIFO_EMPTY BIT(6)
#define UART_IER 0x04
#define UART_FCR 0x08
#define UART_LSR 0x14
#define UART_INT_DISABLE 0x00
#define UART_FIFO_RESET 0x07
#endif /* PMU_H */