blob: a4727d2ea74a7bae846f7a552ab14a2a3f002157 [file] [log] [blame]
#
# Copyright (C) 2018 Marvell International Ltd.
#
# SPDX-License-Identifier: BSD-3-Clause
# https://spdx.org/licenses
#
MARVELL_PLAT_BASE := plat/marvell
MARVELL_PLAT_INCLUDE_BASE := include/plat/marvell
PLAT_FAMILY := a3700
PLAT_FAMILY_BASE := $(MARVELL_PLAT_BASE)/$(PLAT_FAMILY)
PLAT_INCLUDE_BASE := $(MARVELL_PLAT_INCLUDE_BASE)/$(PLAT_FAMILY)
PLAT_COMMON_BASE := $(PLAT_FAMILY_BASE)/common
MARVELL_DRV_BASE := drivers/marvell
MARVELL_COMMON_BASE := $(MARVELL_PLAT_BASE)/common
include $(MARVELL_PLAT_BASE)/marvell.mk
#*********** A3700 *************
DOIMAGEPATH := $(WTP)
DOIMAGETOOL := $(DOIMAGEPATH)/wtptp/linux/tbb_linux
ifeq ($(MARVELL_SECURE_BOOT),1)
DOIMAGE_CFG := $(DOIMAGEPATH)/atf-tim.txt
IMAGESPATH := $(DOIMAGEPATH)/tim/trusted
TIMNCFG := $(DOIMAGEPATH)/atf-timN.txt
TIMNSIG := $(IMAGESPATH)/timnsign.txt
TIM2IMGARGS := -i $(DOIMAGE_CFG) -n $(TIMNCFG)
TIMN_IMAGE := $$(grep "Image Filename:" -m 1 $(TIMNCFG) | cut -c 17-)
else #MARVELL_SECURE_BOOT
DOIMAGE_CFG := $(DOIMAGEPATH)/atf-ntim.txt
IMAGESPATH := $(DOIMAGEPATH)/tim/untrusted
TIM2IMGARGS := -i $(DOIMAGE_CFG)
endif #MARVELL_SECURE_BOOT
TIMBUILD := $(DOIMAGEPATH)/script/buildtim.sh
TIM2IMG := $(DOIMAGEPATH)/script/tim2img.pl
# WTMI_IMG is used to specify the customized RTOS image running over
# Service CPU (CM3 processor). By the default, it points to a
# baremetal binary of fuse programming in A3700_utils.
WTMI_IMG := $(DOIMAGEPATH)/wtmi/fuse/build/fuse.bin
# WTMI_SYSINIT_IMG is used for the system early initialization,
# such as AVS settings, clock-tree setup and dynamic DDR PHY training.
# After the initialization is done, this image will be wiped out
# from the memory and CM3 will continue with RTOS image or other application.
WTMI_SYSINIT_IMG := $(DOIMAGEPATH)/wtmi/sys_init/build/sys_init.bin
# WTMI_MULTI_IMG is composed of CM3 RTOS image (WTMI_IMG)
# and sys-init image (WTMI_SYSINIT_IMG).
WTMI_MULTI_IMG := $(DOIMAGEPATH)/wtmi/build/wtmi.bin
WTMI_ENC_IMG := $(DOIMAGEPATH)/wtmi/build/wtmi-enc.bin
BUILD_UART := uart-images
SRCPATH := $(dir $(BL33))
CLOCKSPRESET ?= CPU_800_DDR_800
DDR_TOPOLOGY ?= 0
BOOTDEV ?= SPINOR
PARTNUM ?= 0
TIM_IMAGE := $$(grep "Image Filename:" -m 1 $(DOIMAGE_CFG) | cut -c 17-)
TIMBLDARGS := $(MARVELL_SECURE_BOOT) $(BOOTDEV) $(IMAGESPATH) $(DOIMAGEPATH) $(CLOCKSPRESET) \
$(DDR_TOPOLOGY) $(PARTNUM) $(DEBUG) $(DOIMAGE_CFG) $(TIMNCFG) $(TIMNSIG) 1
TIMBLDUARTARGS := $(MARVELL_SECURE_BOOT) UART $(IMAGESPATH) $(DOIMAGEPATH) $(CLOCKSPRESET) \
$(DDR_TOPOLOGY) 0 0 $(DOIMAGE_CFG) $(TIMNCFG) $(TIMNSIG) 0
DOIMAGE_FLAGS := -r $(DOIMAGE_CFG) -v -D
# GICV3
$(eval $(call add_define,CONFIG_GICV3))
# CCI-400
$(eval $(call add_define,USE_CCI))
MARVELL_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v3/gicv3_main.c \
drivers/arm/gic/v3/gicv3_helpers.c \
drivers/arm/gic/v3/arm_gicv3_common.c \
plat/common/plat_gicv3.c \
drivers/arm/gic/v3/gic500.c
ATF_INCLUDES := -Iinclude/common/tbbr
PLAT_INCLUDES := -I$(PLAT_FAMILY_BASE)/$(PLAT) \
-I$(PLAT_COMMON_BASE)/include \
-I$(PLAT_INCLUDE_BASE)/common \
-I$(MARVELL_DRV_BASE) \
-I$/drivers/arm/gic/common/ \
$(ATF_INCLUDES)
PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a3700_common.c \
$(MARVELL_COMMON_BASE)/marvell_cci.c \
$(MARVELL_DRV_BASE)/uart/a3700_console.S
BL1_SOURCES += $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
lib/cpus/aarch64/cortex_a53.S
BL31_PORTING_SOURCES := $(PLAT_FAMILY_BASE)/$(PLAT)/board/pm_src.c
MARVELL_DRV := $(MARVELL_DRV_BASE)/comphy/phy-comphy-3700.c
BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \
$(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
$(PLAT_COMMON_BASE)/plat_pm.c \
$(PLAT_COMMON_BASE)/dram_win.c \
$(PLAT_COMMON_BASE)/io_addr_dec.c \
$(PLAT_COMMON_BASE)/marvell_plat_config.c \
$(PLAT_FAMILY_BASE)/$(PLAT)/plat_bl31_setup.c \
$(MARVELL_COMMON_BASE)/marvell_ddr_info.c \
$(MARVELL_COMMON_BASE)/marvell_gicv3.c \
$(MARVELL_GIC_SOURCES) \
drivers/arm/cci/cci.c \
$(BL31_PORTING_SOURCES) \
$(PLAT_COMMON_BASE)/a3700_sip_svc.c \
$(MARVELL_DRV)
mrvl_flash: ${BUILD_PLAT}/${FIP_NAME} ${DOIMAGETOOL}
$(shell truncate -s %128K ${BUILD_PLAT}/bl1.bin)
$(shell cat ${BUILD_PLAT}/bl1.bin ${BUILD_PLAT}/${FIP_NAME} > ${BUILD_PLAT}/${BOOT_IMAGE})
$(shell truncate -s %4 ${BUILD_PLAT}/${BOOT_IMAGE})
$(shell truncate -s %4 $(WTMI_IMG))
@echo
@echo "Building uart images"
$(TIMBUILD) $(TIMBLDUARTARGS)
@sed -i 's|WTMI_IMG|$(WTMI_MULTI_IMG)|1' $(DOIMAGE_CFG)
@sed -i 's|BOOT_IMAGE|$(BUILD_PLAT)/$(BOOT_IMAGE)|1' $(DOIMAGE_CFG)
ifeq ($(MARVELL_SECURE_BOOT),1)
@sed -i 's|WTMI_IMG|$(WTMI_MULTI_IMG)|1' $(TIMNCFG)
@sed -i 's|BOOT_IMAGE|$(BUILD_PLAT)/$(BOOT_IMAGE)|1' $(TIMNCFG)
endif
$(DOIMAGETOOL) $(DOIMAGE_FLAGS)
@if [ -e "$(TIMNCFG)" ]; then $(DOIMAGETOOL) -r $(TIMNCFG); fi
@rm -rf $(BUILD_PLAT)/$(BUILD_UART)*
@mkdir $(BUILD_PLAT)/$(BUILD_UART)
@mv -t $(BUILD_PLAT)/$(BUILD_UART) $(TIM_IMAGE) $(DOIMAGE_CFG) $(TIMN_IMAGE) $(TIMNCFG)
@find . -name "*_h.*" |xargs cp -ut $(BUILD_PLAT)/$(BUILD_UART)
@mv $(subst .bin,_h.bin,$(WTMI_MULTI_IMG)) $(BUILD_PLAT)/$(BUILD_UART)/wtmi_h.bin
@tar czf $(BUILD_PLAT)/$(BUILD_UART).tgz -C $(BUILD_PLAT) ./$(BUILD_UART)
@echo
@echo "Building flash image"
$(TIMBUILD) $(TIMBLDARGS)
sed -i 's|WTMI_IMG|$(WTMI_MULTI_IMG)|1' $(DOIMAGE_CFG)
sed -i 's|BOOT_IMAGE|$(BUILD_PLAT)/$(BOOT_IMAGE)|1' $(DOIMAGE_CFG)
ifeq ($(MARVELL_SECURE_BOOT),1)
@sed -i 's|WTMI_IMG|$(WTMI_MULTI_IMG)|1' $(TIMNCFG)
@sed -i 's|BOOT_IMAGE|$(BUILD_PLAT)/$(BOOT_IMAGE)|1' $(TIMNCFG)
@echo -e "\n\t=======================================================\n";
@echo -e "\t Secure boot. Encrypting wtmi and boot-image \n";
@echo -e "\t=======================================================\n";
@truncate -s %16 $(WTMI_MULTI_IMG)
@openssl enc -aes-256-cbc -e -in $(WTMI_MULTI_IMG) \
-out $(WTMI_ENC_IMG) \
-K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \
-iv `cat $(IMAGESPATH)/iv.txt` -p
@truncate -s %16 $(BUILD_PLAT)/$(BOOT_IMAGE);
@openssl enc -aes-256-cbc -e -in $(BUILD_PLAT)/$(BOOT_IMAGE) \
-out $(BUILD_PLAT)/$(BOOT_ENC_IMAGE) \
-K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \
-iv `cat $(IMAGESPATH)/iv.txt` -p
endif
$(DOIMAGETOOL) $(DOIMAGE_FLAGS)
@if [ -e "$(TIMNCFG)" ]; then $(DOIMAGETOOL) -r $(TIMNCFG); fi
@if [ "$(MARVELL_SECURE_BOOT)" = "1" ]; then sed -i 's|$(WTMI_MULTI_IMG)|$(WTMI_ENC_IMG)|1;s|$(BOOT_IMAGE)|$(BOOT_ENC_IMAGE)|1;' $(TIMNCFG); fi
$(TIM2IMG) $(TIM2IMGARGS) -o $(BUILD_PLAT)/$(FLASH_IMAGE)
@mv -t $(BUILD_PLAT) $(TIM_IMAGE) $(DOIMAGE_CFG) $(TIMN_IMAGE) $(TIMNCFG) $(WTMI_IMG) $(WTMI_SYSINIT_IMG) $(WTMI_MULTI_IMG)
@if [ "$(MARVELL_SECURE_BOOT)" = "1" ]; then mv -t $(BUILD_PLAT) $(WTMI_ENC_IMG) OtpHash.txt; fi
@find . -name "*.txt" | grep -E "CSK[[:alnum:]]_KeyHash.txt|Tim_msg.txt|TIMHash.txt" | xargs rm -f