| /* |
| * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. |
| * Copyright (c) 2019-2020, NVIDIA Corporation. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <string.h> |
| |
| #include <arch_helpers.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <lib/mmio.h> |
| #include <lib/utils.h> |
| #include <lib/xlat_tables/xlat_tables_v2.h> |
| |
| #include <mce.h> |
| #include <memctrl.h> |
| #include <memctrl_v2.h> |
| #include <smmu.h> |
| #include <tegra_def.h> |
| #include <tegra_platform.h> |
| #include <tegra_private.h> |
| |
| /* Video Memory base and size (live values) */ |
| static uint64_t video_mem_base; |
| static uint64_t video_mem_size_mb; |
| |
| /* |
| * Init Memory controller during boot. |
| */ |
| void tegra_memctrl_setup(void) |
| { |
| INFO("Tegra Memory Controller (v2)\n"); |
| |
| /* Initialize the System memory management unit */ |
| tegra_smmu_init(); |
| |
| /* allow platforms to program custom memory controller settings */ |
| plat_memctrl_setup(); |
| |
| /* |
| * All requests at boot time, and certain requests during |
| * normal run time, are physically addressed and must bypass |
| * the SMMU. The client hub logic implements a hardware bypass |
| * path around the Translation Buffer Units (TBU). During |
| * boot-time, the SMMU_BYPASS_CTRL register (which defaults to |
| * TBU_BYPASS mode) will be used to steer all requests around |
| * the uninitialized TBUs. During normal operation, this register |
| * is locked into TBU_BYPASS_SID config, which routes requests |
| * with special StreamID 0x7f on the bypass path and all others |
| * through the selected TBU. This is done to disable SMMU Bypass |
| * mode, as it could be used to circumvent SMMU security checks. |
| */ |
| tegra_mc_write_32(MC_SMMU_BYPASS_CONFIG, |
| MC_SMMU_BYPASS_CONFIG_SETTINGS); |
| } |
| |
| /* |
| * Restore Memory Controller settings after "System Suspend" |
| */ |
| void tegra_memctrl_restore_settings(void) |
| { |
| /* restore platform's memory controller settings */ |
| plat_memctrl_restore(); |
| |
| /* video memory carveout region */ |
| if (video_mem_base != 0ULL) { |
| tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_LO, |
| (uint32_t)video_mem_base); |
| assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_LO) |
| == (uint32_t)video_mem_base); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_HI, |
| (uint32_t)(video_mem_base >> 32)); |
| assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_HI) |
| == (uint32_t)(video_mem_base >> 32)); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB, |
| (uint32_t)video_mem_size_mb); |
| assert(tegra_mc_read_32(MC_VIDEO_PROTECT_SIZE_MB) |
| == (uint32_t)video_mem_size_mb); |
| |
| /* |
| * MCE propagates the VideoMem configuration values across the |
| * CCPLEX. |
| */ |
| mce_update_gsc_videomem(); |
| } |
| } |
| |
| /* |
| * Secure the BL31 DRAM aperture. |
| * |
| * phys_base = physical base of TZDRAM aperture |
| * size_in_bytes = size of aperture in bytes |
| */ |
| void tegra_memctrl_tzdram_setup(uint64_t phys_base, uint32_t size_in_bytes) |
| { |
| /* |
| * Perform platform specific steps. |
| */ |
| plat_memctrl_tzdram_setup(phys_base, size_in_bytes); |
| } |
| |
| /* |
| * Secure the BL31 TZRAM aperture. |
| * |
| * phys_base = physical base of TZRAM aperture |
| * size_in_bytes = size of aperture in bytes |
| */ |
| void tegra_memctrl_tzram_setup(uint64_t phys_base, uint32_t size_in_bytes) |
| { |
| ; /* do nothing */ |
| } |
| |
| /* |
| * Save MC settings before "System Suspend" to TZDRAM |
| */ |
| void tegra_mc_save_context(uint64_t mc_ctx_addr) |
| { |
| uint32_t i, num_entries = 0; |
| mc_regs_t *mc_ctx_regs; |
| const plat_params_from_bl2_t *params_from_bl2 = bl31_get_plat_params(); |
| uint64_t tzdram_base = params_from_bl2->tzdram_base; |
| uint64_t tzdram_end = tzdram_base + params_from_bl2->tzdram_size; |
| |
| assert((mc_ctx_addr >= tzdram_base) && (mc_ctx_addr <= tzdram_end)); |
| |
| /* get MC context table */ |
| mc_ctx_regs = plat_memctrl_get_sys_suspend_ctx(); |
| assert(mc_ctx_regs != NULL); |
| |
| /* |
| * mc_ctx_regs[0].val contains the size of the context table minus |
| * the last entry. Sanity check the table size before we start with |
| * the context save operation. |
| */ |
| while (mc_ctx_regs[num_entries].reg != 0xFFFFFFFFU) { |
| num_entries++; |
| } |
| |
| /* panic if the sizes do not match */ |
| if (num_entries != mc_ctx_regs[0].val) { |
| ERROR("MC context size mismatch!"); |
| panic(); |
| } |
| |
| /* save MC register values */ |
| for (i = 1U; i < num_entries; i++) { |
| mc_ctx_regs[i].val = mmio_read_32(mc_ctx_regs[i].reg); |
| } |
| |
| /* increment by 1 to take care of the last entry */ |
| num_entries++; |
| |
| /* Save MC config settings */ |
| (void)memcpy((void *)mc_ctx_addr, mc_ctx_regs, |
| sizeof(mc_regs_t) * num_entries); |
| |
| /* save the MC table address */ |
| mmio_write_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_LO, |
| (uint32_t)mc_ctx_addr); |
| assert(mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_LO) |
| == (uint32_t)mc_ctx_addr); |
| mmio_write_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_HI, |
| (uint32_t)(mc_ctx_addr >> 32)); |
| assert(mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_MC_TABLE_ADDR_HI) |
| == (uint32_t)(mc_ctx_addr >> 32)); |
| } |
| |
| static void tegra_lock_videomem_nonoverlap(uint64_t phys_base, |
| uint64_t size_in_bytes) |
| { |
| uint32_t index; |
| uint64_t total_128kb_blocks = size_in_bytes >> 17; |
| uint64_t residual_4kb_blocks = (size_in_bytes & (uint32_t)0x1FFFF) >> 12; |
| uint64_t val; |
| |
| /* |
| * Reset the access configuration registers to restrict access to |
| * old Videomem aperture |
| */ |
| for (index = MC_VIDEO_PROTECT_CLEAR_ACCESS_CFG0; |
| index < ((uint32_t)MC_VIDEO_PROTECT_CLEAR_ACCESS_CFG0 + (uint32_t)MC_GSC_CONFIG_REGS_SIZE); |
| index += 4U) { |
| tegra_mc_write_32(index, 0); |
| } |
| |
| /* |
| * Set the base. It must be 4k aligned, at least. |
| */ |
| assert((phys_base & (uint64_t)0xFFF) == 0U); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_LO, (uint32_t)phys_base); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_HI, |
| (uint32_t)(phys_base >> 32) & (uint32_t)MC_GSC_BASE_HI_MASK); |
| |
| /* |
| * Set the aperture size |
| * |
| * total size = (number of 128KB blocks) + (number of remaining 4KB |
| * blocks) |
| * |
| */ |
| val = (uint32_t)((residual_4kb_blocks << MC_GSC_SIZE_RANGE_4KB_SHIFT) | |
| total_128kb_blocks); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_SIZE, (uint32_t)val); |
| |
| /* |
| * Lock the configuration settings by enabling TZ-only lock and |
| * locking the configuration against any future changes from NS |
| * world. |
| */ |
| tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_CFG, |
| (uint32_t)MC_GSC_ENABLE_TZ_LOCK_BIT); |
| |
| /* |
| * MCE propagates the GSC configuration values across the |
| * CCPLEX. |
| */ |
| } |
| |
| static void tegra_unlock_videomem_nonoverlap(void) |
| { |
| /* Clear the base */ |
| tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_LO, 0); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_BASE_HI, 0); |
| |
| /* Clear the size */ |
| tegra_mc_write_32(MC_VIDEO_PROTECT_CLEAR_SIZE, 0); |
| } |
| |
| static void tegra_clear_videomem(uintptr_t non_overlap_area_start, |
| unsigned long long non_overlap_area_size) |
| { |
| int ret; |
| |
| INFO("Cleaning previous Video Memory Carveout\n"); |
| |
| /* |
| * Map the NS memory first, clean it and then unmap it. |
| */ |
| ret = mmap_add_dynamic_region(non_overlap_area_start, /* PA */ |
| non_overlap_area_start, /* VA */ |
| non_overlap_area_size, /* size */ |
| MT_DEVICE | MT_RW | MT_NS); /* attrs */ |
| assert(ret == 0); |
| |
| zeromem((void *)non_overlap_area_start, non_overlap_area_size); |
| flush_dcache_range(non_overlap_area_start, non_overlap_area_size); |
| |
| ret = mmap_remove_dynamic_region(non_overlap_area_start, |
| non_overlap_area_size); |
| assert(ret == 0); |
| } |
| |
| static void tegra_clear_videomem_nonoverlap(uintptr_t phys_base, |
| unsigned long size_in_bytes) |
| { |
| uintptr_t vmem_end_old = video_mem_base + (video_mem_size_mb << 20); |
| uintptr_t vmem_end_new = phys_base + size_in_bytes; |
| unsigned long long non_overlap_area_size; |
| |
| /* |
| * Clear the old regions now being exposed. The following cases |
| * can occur - |
| * |
| * 1. clear whole old region (no overlap with new region) |
| * 2. clear old sub-region below new base |
| * 3. clear old sub-region above new end |
| */ |
| if ((phys_base > vmem_end_old) || (video_mem_base > vmem_end_new)) { |
| tegra_clear_videomem(video_mem_base, |
| video_mem_size_mb << 20U); |
| } else { |
| if (video_mem_base < phys_base) { |
| non_overlap_area_size = phys_base - video_mem_base; |
| tegra_clear_videomem(video_mem_base, non_overlap_area_size); |
| } |
| if (vmem_end_old > vmem_end_new) { |
| non_overlap_area_size = vmem_end_old - vmem_end_new; |
| tegra_clear_videomem(vmem_end_new, non_overlap_area_size); |
| } |
| } |
| } |
| |
| /* |
| * Program the Video Memory carveout region |
| * |
| * phys_base = physical base of aperture |
| * size_in_bytes = size of aperture in bytes |
| */ |
| void tegra_memctrl_videomem_setup(uint64_t phys_base, uint32_t size_in_bytes) |
| { |
| /* |
| * Setup the Memory controller to restrict CPU accesses to the Video |
| * Memory region |
| */ |
| |
| INFO("Configuring Video Memory Carveout\n"); |
| |
| if (video_mem_base != 0U) { |
| /* |
| * Lock the non overlapping memory being cleared so that |
| * other masters do not accidentally write to it. The memory |
| * would be unlocked once the non overlapping region is |
| * cleared and the new memory settings take effect. |
| */ |
| tegra_lock_videomem_nonoverlap(video_mem_base, |
| video_mem_size_mb << 20); |
| } |
| |
| /* program the Videomem aperture */ |
| tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_LO, (uint32_t)phys_base); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_BASE_HI, |
| (uint32_t)(phys_base >> 32)); |
| tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB, size_in_bytes >> 20); |
| |
| /* Redundancy check for Video Protect setting */ |
| assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_LO) |
| == (uint32_t)phys_base); |
| assert(tegra_mc_read_32(MC_VIDEO_PROTECT_BASE_HI) |
| == (uint32_t)(phys_base >> 32)); |
| assert(tegra_mc_read_32(MC_VIDEO_PROTECT_SIZE_MB) |
| == (size_in_bytes >> 20)); |
| |
| /* |
| * MCE propagates the VideoMem configuration values across the |
| * CCPLEX. |
| */ |
| (void)mce_update_gsc_videomem(); |
| |
| /* Clear the non-overlapping memory */ |
| if (video_mem_base != 0U) { |
| tegra_clear_videomem_nonoverlap(phys_base, size_in_bytes); |
| tegra_unlock_videomem_nonoverlap(); |
| } |
| |
| /* store new values */ |
| video_mem_base = phys_base; |
| video_mem_size_mb = (uint64_t)size_in_bytes >> 20; |
| } |
| |
| /* |
| * This feature exists only for v1 of the Tegra Memory Controller. |
| */ |
| void tegra_memctrl_disable_ahb_redirection(void) |
| { |
| ; /* do nothing */ |
| } |
| |
| void tegra_memctrl_clear_pending_interrupts(void) |
| { |
| ; /* do nothing */ |
| } |