plat/juno/juno_def.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __JUNO_DEF_H__
 #define __JUNO_DEF_H__

 /* Special value used to verify platform parameters from BL2 to BL3-1 */
 #define JUNO_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL

 /*******************************************************************************
  * Juno memory map related constants
  ******************************************************************************/
 #define PLAT_TRUSTED_SRAM_ID	0
 #define PLAT_DRAM_ID		1

 #define MHU_SECURE_BASE		0x04000000
 #define MHU_SECURE_SIZE		0x00001000

 #define MHU_PAYLOAD_CACHED	0

 #define TRUSTED_MAILBOXES_BASE	MHU_SECURE_BASE
 #define TRUSTED_MAILBOX_SHIFT	4

 #define EMMC_BASE		0x0c000000
 #define EMMC_SIZE		0x04000000

 #define PSRAM_BASE		0x14000000
 #define PSRAM_SIZE		0x02000000

 #define IOFPGA_BASE		0x1c000000
 #define IOFPGA_SIZE		0x03000000

 #define NSROM_BASE		0x1f000000
 #define NSROM_SIZE		0x00001000

 /* Following covers Columbus Peripherals excluding NSROM and NSRAM  */
 #define DEVICE0_BASE		0x20000000
 #define DEVICE0_SIZE		0x0e000000
 #define MHU_BASE		0x2b1f0000

 #define NSRAM_BASE		0x2e000000
 #define NSRAM_SIZE		0x00008000

 /* Following covers Juno Peripherals and PCIe expansion area */
 #define DEVICE1_BASE		0x40000000
 #define DEVICE1_SIZE		0x40000000
 #define PCIE_CONTROL_BASE	0x7ff20000

 #define DRAM_BASE		0x80000000
 #define DRAM_SIZE		0x80000000

 /*
  * DRAM at 0x8000_0000 is divided in two regions:
  *   - Secure DRAM (default is the top 16MB except for the last 2MB, which are
  *     used by the SCP for DDR retraining)
  *   - Non-Secure DRAM (remaining DRAM starting at DRAM_BASE)
  */

 #define DRAM_SCP_SIZE		0x00200000
 #define DRAM_SCP_BASE		(DRAM_BASE + DRAM_SIZE - DRAM_SCP_SIZE)

 #define DRAM_SEC_SIZE		0x00E00000
 #define DRAM_SEC_BASE		(DRAM_SCP_BASE - DRAM_SEC_SIZE)

 #define DRAM_NS_BASE		DRAM_BASE
 #define DRAM_NS_SIZE		(DRAM_SIZE - DRAM_SCP_SIZE - DRAM_SEC_SIZE)

 /* Second region of DRAM */
 #define DRAM2_BASE		0x880000000
 #define DRAM2_SIZE		0x180000000

 /* Memory mapped Generic timer interfaces  */
 #define SYS_CNTCTL_BASE		0x2a430000
 #define SYS_CNTREAD_BASE	0x2a800000
 #define SYS_TIMCTL_BASE		0x2a810000

 /* V2M motherboard system registers & offsets */
 #define VE_SYSREGS_BASE		0x1c010000
 #define V2M_SYS_LED		0x8

 /*
  * V2M sysled bit definitions. The values written to this
  * register are defined in arch.h & runtime_svc.h. Only
  * used by the primary cpu to diagnose any cold boot issues.
  *
  * SYS_LED[0]   - Security state (S=0/NS=1)
  * SYS_LED[2:1] - Exception Level (EL3-EL0)
  * SYS_LED[7:3] - Exception Class (Sync/Async & origin)
  *
  */
 #define SYS_LED_SS_SHIFT		0x0
 #define SYS_LED_EL_SHIFT		0x1
 #define SYS_LED_EC_SHIFT		0x3

 /*******************************************************************************
  * GIC-400 & interrupt handling related constants
  ******************************************************************************/
 #define GICD_BASE			0x2c010000
 #define GICC_BASE			0x2c02f000
 #define GICH_BASE			0x2c04f000
 #define GICV_BASE			0x2c06f000

 #define IRQ_MHU			69
 #define IRQ_GPU_SMMU_0		71
 #define IRQ_GPU_SMMU_1		73
 #define IRQ_ETR_SMMU		75
 #define IRQ_TZC400		80
 #define IRQ_TZ_WDOG		86

 #define IRQ_SEC_PHY_TIMER		29
 #define IRQ_SEC_SGI_0			8
 #define IRQ_SEC_SGI_1			9
 #define IRQ_SEC_SGI_2			10
 #define IRQ_SEC_SGI_3			11
 #define IRQ_SEC_SGI_4			12
 #define IRQ_SEC_SGI_5			13
 #define IRQ_SEC_SGI_6			14
 #define IRQ_SEC_SGI_7			15
 #define IRQ_SEC_SGI_8			16

 /*******************************************************************************
  * PL011 related constants
  ******************************************************************************/
 /* FPGA UART0 */
 #define PL011_UART0_BASE		0x1c090000
 /* FPGA UART1 */
 #define PL011_UART1_BASE		0x1c0a0000
 /* SoC UART0 */
 #define PL011_UART2_BASE		0x7ff80000
 /* SoC UART1 */
 #define PL011_UART3_BASE		0x7ff70000

 #define PL011_BAUDRATE			115200

 #define PL011_UART0_CLK_IN_HZ		24000000
 #define PL011_UART1_CLK_IN_HZ		24000000
 #define PL011_UART2_CLK_IN_HZ		7273800
 #define PL011_UART3_CLK_IN_HZ		7273800

 /*******************************************************************************
  * NIC-400 related constants
  ******************************************************************************/

 /* CSS NIC-400 Global Programmers View (GPV) */
 #define CSS_NIC400_BASE		0x2a000000

 /* The slave_bootsecure controls access to GPU, DMC and CS. */
 #define CSS_NIC400_SLAVE_BOOTSECURE		8

 /* SoC NIC-400 Global Programmers View (GPV) */
 #define SOC_NIC400_BASE		0x7fd00000

 #define SOC_NIC400_USB_EHCI	0
 #define SOC_NIC400_TLX_MASTER	1
 #define SOC_NIC400_USB_OHCI	2
 #define SOC_NIC400_PL354_SMC	3
 /*
  * The apb4_bridge controls access to:
  *   - the PCIe configuration registers
  *   - the MMU units for USB, HDLCD and DMA
  */
 #define SOC_NIC400_APB4_BRIDGE	4
 /*
  * The bootsec_bridge controls access to a bunch of peripherals, e.g. the UARTs.
  */
 #define SOC_NIC400_BOOTSEC_BRIDGE		5
 #define SOC_NIC400_BOOTSEC_BRIDGE_UART1         (1 << 12)

 /*******************************************************************************
  * TZC-400 related constants
  ******************************************************************************/
 #define TZC400_BASE		0x2a4a0000

 #define TZC400_NSAID_CCI400	0  /* Note: Same as default NSAID!! */
 #define TZC400_NSAID_PCIE	1
 #define TZC400_NSAID_HDLCD0	2
 #define TZC400_NSAID_HDLCD1	3
 #define TZC400_NSAID_USB	4
 #define TZC400_NSAID_DMA330	5
 #define TZC400_NSAID_THINLINKS	6
 #define TZC400_NSAID_AP		9
 #define TZC400_NSAID_GPU	10
 #define TZC400_NSAID_SCP	11
 #define TZC400_NSAID_CORESIGHT	12

 /*******************************************************************************
  * CCI-400 related constants
  ******************************************************************************/
 #define CCI400_BASE			0x2c090000
 #define CCI400_SL_IFACE3_CLUSTER_IX	1
 #define CCI400_SL_IFACE4_CLUSTER_IX	0

 /*******************************************************************************
  * SCP <=> AP boot configuration
  ******************************************************************************/
 #define SCP_BOOT_CFG_ADDR	0x04000080
 #define PRIMARY_CPU_SHIFT	8
 #define PRIMARY_CPU_MASK	0xf

 #endif /* __JUNO_DEF_H__ */
	/*
	* Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __JUNO_DEF_H__
	#define __JUNO_DEF_H__

	/* Special value used to verify platform parameters from BL2 to BL3-1 */
	#define JUNO_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL

	/*******************************************************************************
	* Juno memory map related constants
	******************************************************************************/
	#define PLAT_TRUSTED_SRAM_ID 0
	#define PLAT_DRAM_ID 1

	#define MHU_SECURE_BASE 0x04000000
	#define MHU_SECURE_SIZE 0x00001000

	#define MHU_PAYLOAD_CACHED 0

	#define TRUSTED_MAILBOXES_BASE MHU_SECURE_BASE
	#define TRUSTED_MAILBOX_SHIFT 4

	#define EMMC_BASE 0x0c000000
	#define EMMC_SIZE 0x04000000

	#define PSRAM_BASE 0x14000000
	#define PSRAM_SIZE 0x02000000

	#define IOFPGA_BASE 0x1c000000
	#define IOFPGA_SIZE 0x03000000

	#define NSROM_BASE 0x1f000000
	#define NSROM_SIZE 0x00001000

	/* Following covers Columbus Peripherals excluding NSROM and NSRAM */
	#define DEVICE0_BASE 0x20000000
	#define DEVICE0_SIZE 0x0e000000
	#define MHU_BASE 0x2b1f0000

	#define NSRAM_BASE 0x2e000000
	#define NSRAM_SIZE 0x00008000

	/* Following covers Juno Peripherals and PCIe expansion area */
	#define DEVICE1_BASE 0x40000000
	#define DEVICE1_SIZE 0x40000000
	#define PCIE_CONTROL_BASE 0x7ff20000

	#define DRAM_BASE 0x80000000
	#define DRAM_SIZE 0x80000000

	/*
	* DRAM at 0x8000_0000 is divided in two regions:
	* - Secure DRAM (default is the top 16MB except for the last 2MB, which are
	* used by the SCP for DDR retraining)
	* - Non-Secure DRAM (remaining DRAM starting at DRAM_BASE)
	*/

	#define DRAM_SCP_SIZE 0x00200000
	#define DRAM_SCP_BASE (DRAM_BASE + DRAM_SIZE - DRAM_SCP_SIZE)

	#define DRAM_SEC_SIZE 0x00E00000
	#define DRAM_SEC_BASE (DRAM_SCP_BASE - DRAM_SEC_SIZE)

	#define DRAM_NS_BASE DRAM_BASE
	#define DRAM_NS_SIZE (DRAM_SIZE - DRAM_SCP_SIZE - DRAM_SEC_SIZE)

	/* Second region of DRAM */
	#define DRAM2_BASE 0x880000000
	#define DRAM2_SIZE 0x180000000

	/* Memory mapped Generic timer interfaces */
	#define SYS_CNTCTL_BASE 0x2a430000
	#define SYS_CNTREAD_BASE 0x2a800000
	#define SYS_TIMCTL_BASE 0x2a810000

	/* V2M motherboard system registers & offsets */
	#define VE_SYSREGS_BASE 0x1c010000
	#define V2M_SYS_LED 0x8

	/*
	* V2M sysled bit definitions. The values written to this
	* register are defined in arch.h & runtime_svc.h. Only
	* used by the primary cpu to diagnose any cold boot issues.
	*
	* SYS_LED[0] - Security state (S=0/NS=1)
	* SYS_LED[2:1] - Exception Level (EL3-EL0)
	* SYS_LED[7:3] - Exception Class (Sync/Async & origin)
	*
	*/
	#define SYS_LED_SS_SHIFT 0x0
	#define SYS_LED_EL_SHIFT 0x1
	#define SYS_LED_EC_SHIFT 0x3

	/*******************************************************************************
	* GIC-400 & interrupt handling related constants
	******************************************************************************/
	#define GICD_BASE 0x2c010000
	#define GICC_BASE 0x2c02f000
	#define GICH_BASE 0x2c04f000
	#define GICV_BASE 0x2c06f000

	#define IRQ_MHU 69
	#define IRQ_GPU_SMMU_0 71
	#define IRQ_GPU_SMMU_1 73
	#define IRQ_ETR_SMMU 75
	#define IRQ_TZC400 80
	#define IRQ_TZ_WDOG 86

	#define IRQ_SEC_PHY_TIMER 29
	#define IRQ_SEC_SGI_0 8
	#define IRQ_SEC_SGI_1 9
	#define IRQ_SEC_SGI_2 10
	#define IRQ_SEC_SGI_3 11
	#define IRQ_SEC_SGI_4 12
	#define IRQ_SEC_SGI_5 13
	#define IRQ_SEC_SGI_6 14
	#define IRQ_SEC_SGI_7 15
	#define IRQ_SEC_SGI_8 16

	/*******************************************************************************
	* PL011 related constants
	******************************************************************************/
	/* FPGA UART0 */
	#define PL011_UART0_BASE 0x1c090000
	/* FPGA UART1 */
	#define PL011_UART1_BASE 0x1c0a0000
	/* SoC UART0 */
	#define PL011_UART2_BASE 0x7ff80000
	/* SoC UART1 */
	#define PL011_UART3_BASE 0x7ff70000

	#define PL011_BAUDRATE 115200

	#define PL011_UART0_CLK_IN_HZ 24000000
	#define PL011_UART1_CLK_IN_HZ 24000000
	#define PL011_UART2_CLK_IN_HZ 7273800
	#define PL011_UART3_CLK_IN_HZ 7273800

	/*******************************************************************************
	* NIC-400 related constants
	******************************************************************************/

	/* CSS NIC-400 Global Programmers View (GPV) */
	#define CSS_NIC400_BASE 0x2a000000

	/* The slave_bootsecure controls access to GPU, DMC and CS. */
	#define CSS_NIC400_SLAVE_BOOTSECURE 8

	/* SoC NIC-400 Global Programmers View (GPV) */
	#define SOC_NIC400_BASE 0x7fd00000

	#define SOC_NIC400_USB_EHCI 0
	#define SOC_NIC400_TLX_MASTER 1
	#define SOC_NIC400_USB_OHCI 2
	#define SOC_NIC400_PL354_SMC 3
	/*
	* The apb4_bridge controls access to:
	* - the PCIe configuration registers
	* - the MMU units for USB, HDLCD and DMA
	*/
	#define SOC_NIC400_APB4_BRIDGE 4
	/*
	* The bootsec_bridge controls access to a bunch of peripherals, e.g. the UARTs.
	*/
	#define SOC_NIC400_BOOTSEC_BRIDGE 5
	#define SOC_NIC400_BOOTSEC_BRIDGE_UART1 (1 << 12)

	/*******************************************************************************
	* TZC-400 related constants
	******************************************************************************/
	#define TZC400_BASE 0x2a4a0000

	#define TZC400_NSAID_CCI400 0 /* Note: Same as default NSAID!! */
	#define TZC400_NSAID_PCIE 1
	#define TZC400_NSAID_HDLCD0 2
	#define TZC400_NSAID_HDLCD1 3
	#define TZC400_NSAID_USB 4
	#define TZC400_NSAID_DMA330 5
	#define TZC400_NSAID_THINLINKS 6
	#define TZC400_NSAID_AP 9
	#define TZC400_NSAID_GPU 10
	#define TZC400_NSAID_SCP 11
	#define TZC400_NSAID_CORESIGHT 12

	/*******************************************************************************
	* CCI-400 related constants
	******************************************************************************/
	#define CCI400_BASE 0x2c090000
	#define CCI400_SL_IFACE3_CLUSTER_IX 1
	#define CCI400_SL_IFACE4_CLUSTER_IX 0

	/*******************************************************************************
	* SCP <=> AP boot configuration
	******************************************************************************/
	#define SCP_BOOT_CFG_ADDR 0x04000080
	#define PRIMARY_CPU_SHIFT 8
	#define PRIMARY_CPU_MASK 0xf

	#endif /* __JUNO_DEF_H__ */