blob: 6d68bfbe0250cb724b1c99acc8711abf83d7e634 [file] [log] [blame]
/*
* Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arm_def.h>
#include <gicv3.h>
#include <plat_arm.h>
#include <platform.h>
#include <platform_def.h>
/******************************************************************************
* The following functions are defined as weak to allow a platform to override
* the way the GICv3 driver is initialised and used.
*****************************************************************************/
#pragma weak plat_arm_gic_driver_init
#pragma weak plat_arm_gic_init
#pragma weak plat_arm_gic_cpuif_enable
#pragma weak plat_arm_gic_cpuif_disable
#pragma weak plat_arm_gic_pcpu_init
#pragma weak plat_arm_gic_redistif_on
#pragma weak plat_arm_gic_redistif_off
/* The GICv3 driver only needs to be initialized in EL3 */
static uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
/* Array of Group1 secure interrupts to be configured by the gic driver */
static const unsigned int g1s_interrupt_array[] = {
PLAT_ARM_G1S_IRQS
};
/* Array of Group0 interrupts to be configured by the gic driver */
static const unsigned int g0_interrupt_array[] = {
PLAT_ARM_G0_IRQS
};
const gicv3_driver_data_t arm_gic_data = {
.gicd_base = PLAT_ARM_GICD_BASE,
.gicr_base = PLAT_ARM_GICR_BASE,
.g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array),
.g1s_interrupt_num = ARRAY_SIZE(g1s_interrupt_array),
.g0_interrupt_array = g0_interrupt_array,
.g1s_interrupt_array = g1s_interrupt_array,
.rdistif_num = PLATFORM_CORE_COUNT,
.rdistif_base_addrs = rdistif_base_addrs,
.mpidr_to_core_pos = plat_arm_calc_core_pos
};
void plat_arm_gic_driver_init(void)
{
/*
* The GICv3 driver is initialized in EL3 and does not need
* to be initialized again in SEL1. This is because the S-EL1
* can use GIC system registers to manage interrupts and does
* not need GIC interface base addresses to be configured.
*/
#if (AARCH32 && IMAGE_BL32) || (IMAGE_BL31 && !AARCH32)
gicv3_driver_init(&arm_gic_data);
#endif
}
/******************************************************************************
* ARM common helper to initialize the GIC. Only invoked by BL31
*****************************************************************************/
void plat_arm_gic_init(void)
{
gicv3_distif_init();
gicv3_rdistif_init(plat_my_core_pos());
gicv3_cpuif_enable(plat_my_core_pos());
}
/******************************************************************************
* ARM common helper to enable the GIC CPU interface
*****************************************************************************/
void plat_arm_gic_cpuif_enable(void)
{
gicv3_cpuif_enable(plat_my_core_pos());
}
/******************************************************************************
* ARM common helper to disable the GIC CPU interface
*****************************************************************************/
void plat_arm_gic_cpuif_disable(void)
{
gicv3_cpuif_disable(plat_my_core_pos());
}
/******************************************************************************
* ARM common helper to initialize the per-cpu redistributor interface in GICv3
*****************************************************************************/
void plat_arm_gic_pcpu_init(void)
{
gicv3_rdistif_init(plat_my_core_pos());
}
/******************************************************************************
* ARM common helpers to power GIC redistributor interface
*****************************************************************************/
void plat_arm_gic_redistif_on(void)
{
gicv3_rdistif_on(plat_my_core_pos());
}
void plat_arm_gic_redistif_off(void)
{
gicv3_rdistif_off(plat_my_core_pos());
}