services/spd/opteed/opteed_main.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */


 /*******************************************************************************
  * This is the Secure Payload Dispatcher (SPD). The dispatcher is meant to be a
  * plug-in component to the Secure Monitor, registered as a runtime service. The
  * SPD is expected to be a functional extension of the Secure Payload (SP) that
  * executes in Secure EL1. The Secure Monitor will delegate all SMCs targeting
  * the Trusted OS/Applications range to the dispatcher. The SPD will either
  * handle the request locally or delegate it to the Secure Payload. It is also
  * responsible for initialising and maintaining communication with the SP.
  ******************************************************************************/
 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl31.h>
 #include <bl_common.h>
 #include <context_mgmt.h>
 #include <debug.h>
 #include <errno.h>
 #include <platform.h>
 #include <runtime_svc.h>
 #include <stddef.h>
 #include <uuid.h>
 #include "opteed_private.h"
 #include "teesmc_opteed.h"
 #include "teesmc_opteed_macros.h"


 /*******************************************************************************
  * Address of the entrypoint vector table in OPTEE. It is
  * initialised once on the primary core after a cold boot.
  ******************************************************************************/
 optee_vectors_t *optee_vectors;

 /*******************************************************************************
  * Array to keep track of per-cpu OPTEE state
  ******************************************************************************/
 optee_context_t opteed_sp_context[OPTEED_CORE_COUNT];
 uint32_t opteed_rw;

 static int32_t opteed_init(void);

 /*******************************************************************************
  * This function is the handler registered for S-EL1 interrupts by the
  * OPTEED. It validates the interrupt and upon success arranges entry into
  * the OPTEE at 'optee_fiq_entry()' for handling the interrupt.
  ******************************************************************************/
 static uint64_t opteed_sel1_interrupt_handler(uint32_t id,
 					    uint32_t flags,
 					    void *handle,
 					    void *cookie)
 {
 	uint32_t linear_id;
 	optee_context_t *optee_ctx;

 	/* Check the security state when the exception was generated */
 	assert(get_interrupt_src_ss(flags) == NON_SECURE);

 	/* Sanity check the pointer to this cpu's context */
 	assert(handle == cm_get_context(NON_SECURE));

 	/* Save the non-secure context before entering the OPTEE */
 	cm_el1_sysregs_context_save(NON_SECURE);

 	/* Get a reference to this cpu's OPTEE context */
 	linear_id = plat_my_core_pos();
 	optee_ctx = &opteed_sp_context[linear_id];
 	assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));

 	cm_set_elr_el3(SECURE, (uint64_t)&optee_vectors->fiq_entry);
 	cm_el1_sysregs_context_restore(SECURE);
 	cm_set_next_eret_context(SECURE);

 	/*
 	 * Tell the OPTEE that it has to handle an FIQ (synchronously).
 	 * Also the instruction in normal world where the interrupt was
 	 * generated is passed for debugging purposes. It is safe to
 	 * retrieve this address from ELR_EL3 as the secure context will
 	 * not take effect until el3_exit().
 	 */
 	SMC_RET1(&optee_ctx->cpu_ctx, read_elr_el3());
 }

 /*******************************************************************************
  * OPTEE Dispatcher setup. The OPTEED finds out the OPTEE entrypoint and type
  * (aarch32/aarch64) if not already known and initialises the context for entry
  * into OPTEE for its initialization.
  ******************************************************************************/
 static int32_t opteed_setup(void)
 {
 	entry_point_info_t *optee_ep_info;
 	uint32_t linear_id;
 	uint64_t opteed_pageable_part;
 	uint64_t opteed_mem_limit;
 	uint64_t dt_addr;

 	linear_id = plat_my_core_pos();

 	/*
 	 * Get information about the Secure Payload (BL32) image. Its
 	 * absence is a critical failure.  TODO: Add support to
 	 * conditionally include the SPD service
 	 */
 	optee_ep_info = bl31_plat_get_next_image_ep_info(SECURE);
 	if (!optee_ep_info) {
 		WARN("No OPTEE provided by BL2 boot loader, Booting device"
 			" without OPTEE initialization. SMC`s destined for OPTEE"
 			" will return SMC_UNK\n");
 		return 1;
 	}

 	/*
 	 * If there's no valid entry point for SP, we return a non-zero value
 	 * signalling failure initializing the service. We bail out without
 	 * registering any handlers
 	 */
 	if (!optee_ep_info->pc)
 		return 1;

 	opteed_rw = optee_ep_info->args.arg0;
 	opteed_pageable_part = optee_ep_info->args.arg1;
 	opteed_mem_limit = optee_ep_info->args.arg2;
 	dt_addr = optee_ep_info->args.arg3;

 	opteed_init_optee_ep_state(optee_ep_info,
 				opteed_rw,
 				optee_ep_info->pc,
 				opteed_pageable_part,
 				opteed_mem_limit,
 				dt_addr,
 				&opteed_sp_context[linear_id]);

 	/*
 	 * All OPTEED initialization done. Now register our init function with
 	 * BL31 for deferred invocation
 	 */
 	bl31_register_bl32_init(&opteed_init);

 	return 0;
 }

 /*******************************************************************************
  * This function passes control to the OPTEE image (BL32) for the first time
  * on the primary cpu after a cold boot. It assumes that a valid secure
  * context has already been created by opteed_setup() which can be directly
  * used.  It also assumes that a valid non-secure context has been
  * initialised by PSCI so it does not need to save and restore any
  * non-secure state. This function performs a synchronous entry into
  * OPTEE. OPTEE passes control back to this routine through a SMC.
  ******************************************************************************/
 static int32_t opteed_init(void)
 {
 	uint32_t linear_id = plat_my_core_pos();
 	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
 	entry_point_info_t *optee_entry_point;
 	uint64_t rc;

 	/*
 	 * Get information about the OPTEE (BL32) image. Its
 	 * absence is a critical failure.
 	 */
 	optee_entry_point = bl31_plat_get_next_image_ep_info(SECURE);
 	assert(optee_entry_point);

 	cm_init_my_context(optee_entry_point);

 	/*
 	 * Arrange for an entry into OPTEE. It will be returned via
 	 * OPTEE_ENTRY_DONE case
 	 */
 	rc = opteed_synchronous_sp_entry(optee_ctx);
 	assert(rc != 0);

 	return rc;
 }


 /*******************************************************************************
  * This function is responsible for handling all SMCs in the Trusted OS/App
  * range from the non-secure state as defined in the SMC Calling Convention
  * Document. It is also responsible for communicating with the Secure
  * payload to delegate work and return results back to the non-secure
  * state. Lastly it will also return any information that OPTEE needs to do
  * the work assigned to it.
  ******************************************************************************/
 static uintptr_t opteed_smc_handler(uint32_t smc_fid,
 			 u_register_t x1,
 			 u_register_t x2,
 			 u_register_t x3,
 			 u_register_t x4,
 			 void *cookie,
 			 void *handle,
 			 u_register_t flags)
 {
 	cpu_context_t *ns_cpu_context;
 	uint32_t linear_id = plat_my_core_pos();
 	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
 	uint64_t rc;

 	/*
 	 * Determine which security state this SMC originated from
 	 */

 	if (is_caller_non_secure(flags)) {
 		/*
 		 * This is a fresh request from the non-secure client.
 		 * The parameters are in x1 and x2. Figure out which
 		 * registers need to be preserved, save the non-secure
 		 * state and send the request to the secure payload.
 		 */
 		assert(handle == cm_get_context(NON_SECURE));

 		cm_el1_sysregs_context_save(NON_SECURE);

 		/*
 		 * We are done stashing the non-secure context. Ask the
 		 * OPTEE to do the work now.
 		 */

 		/*
 		 * Verify if there is a valid context to use, copy the
 		 * operation type and parameters to the secure context
 		 * and jump to the fast smc entry point in the secure
 		 * payload. Entry into S-EL1 will take place upon exit
 		 * from this function.
 		 */
 		assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));

 		/* Set appropriate entry for SMC.
 		 * We expect OPTEE to manage the PSTATE.I and PSTATE.F
 		 * flags as appropriate.
 		 */
 		if (GET_SMC_TYPE(smc_fid) == SMC_TYPE_FAST) {
 			cm_set_elr_el3(SECURE, (uint64_t)
 					&optee_vectors->fast_smc_entry);
 		} else {
 			cm_set_elr_el3(SECURE, (uint64_t)
 					&optee_vectors->yield_smc_entry);
 		}

 		cm_el1_sysregs_context_restore(SECURE);
 		cm_set_next_eret_context(SECURE);

 		write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
 			      CTX_GPREG_X4,
 			      read_ctx_reg(get_gpregs_ctx(handle),
 					   CTX_GPREG_X4));
 		write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
 			      CTX_GPREG_X5,
 			      read_ctx_reg(get_gpregs_ctx(handle),
 					   CTX_GPREG_X5));
 		write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
 			      CTX_GPREG_X6,
 			      read_ctx_reg(get_gpregs_ctx(handle),
 					   CTX_GPREG_X6));
 		/* Propagate hypervisor client ID */
 		write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
 			      CTX_GPREG_X7,
 			      read_ctx_reg(get_gpregs_ctx(handle),
 					   CTX_GPREG_X7));

 		SMC_RET4(&optee_ctx->cpu_ctx, smc_fid, x1, x2, x3);
 	}

 	/*
 	 * Returning from OPTEE
 	 */

 	switch (smc_fid) {
 	/*
 	 * OPTEE has finished initialising itself after a cold boot
 	 */
 	case TEESMC_OPTEED_RETURN_ENTRY_DONE:
 		/*
 		 * Stash the OPTEE entry points information. This is done
 		 * only once on the primary cpu
 		 */
 		assert(optee_vectors == NULL);
 		optee_vectors = (optee_vectors_t *) x1;

 		if (optee_vectors) {
 			set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_ON);

 			/*
 			 * OPTEE has been successfully initialized.
 			 * Register power management hooks with PSCI
 			 */
 			psci_register_spd_pm_hook(&opteed_pm);

 			/*
 			 * Register an interrupt handler for S-EL1 interrupts
 			 * when generated during code executing in the
 			 * non-secure state.
 			 */
 			flags = 0;
 			set_interrupt_rm_flag(flags, NON_SECURE);
 			rc = register_interrupt_type_handler(INTR_TYPE_S_EL1,
 						opteed_sel1_interrupt_handler,
 						flags);
 			if (rc)
 				panic();
 		}

 		/*
 		 * OPTEE reports completion. The OPTEED must have initiated
 		 * the original request through a synchronous entry into
 		 * OPTEE. Jump back to the original C runtime context.
 		 */
 		opteed_synchronous_sp_exit(optee_ctx, x1);
 		break;


 	/*
 	 * These function IDs is used only by OP-TEE to indicate it has
 	 * finished:
 	 * 1. turning itself on in response to an earlier psci
 	 *    cpu_on request
 	 * 2. resuming itself after an earlier psci cpu_suspend
 	 *    request.
 	 */
 	case TEESMC_OPTEED_RETURN_ON_DONE:
 	case TEESMC_OPTEED_RETURN_RESUME_DONE:


 	/*
 	 * These function IDs is used only by the SP to indicate it has
 	 * finished:
 	 * 1. suspending itself after an earlier psci cpu_suspend
 	 *    request.
 	 * 2. turning itself off in response to an earlier psci
 	 *    cpu_off request.
 	 */
 	case TEESMC_OPTEED_RETURN_OFF_DONE:
 	case TEESMC_OPTEED_RETURN_SUSPEND_DONE:
 	case TEESMC_OPTEED_RETURN_SYSTEM_OFF_DONE:
 	case TEESMC_OPTEED_RETURN_SYSTEM_RESET_DONE:

 		/*
 		 * OPTEE reports completion. The OPTEED must have initiated the
 		 * original request through a synchronous entry into OPTEE.
 		 * Jump back to the original C runtime context, and pass x1 as
 		 * return value to the caller
 		 */
 		opteed_synchronous_sp_exit(optee_ctx, x1);
 		break;

 	/*
 	 * OPTEE is returning from a call or being preempted from a call, in
 	 * either case execution should resume in the normal world.
 	 */
 	case TEESMC_OPTEED_RETURN_CALL_DONE:
 		/*
 		 * This is the result from the secure client of an
 		 * earlier request. The results are in x0-x3. Copy it
 		 * into the non-secure context, save the secure state
 		 * and return to the non-secure state.
 		 */
 		assert(handle == cm_get_context(SECURE));
 		cm_el1_sysregs_context_save(SECURE);

 		/* Get a reference to the non-secure context */
 		ns_cpu_context = cm_get_context(NON_SECURE);
 		assert(ns_cpu_context);

 		/* Restore non-secure state */
 		cm_el1_sysregs_context_restore(NON_SECURE);
 		cm_set_next_eret_context(NON_SECURE);

 		SMC_RET4(ns_cpu_context, x1, x2, x3, x4);

 	/*
 	 * OPTEE has finished handling a S-EL1 FIQ interrupt. Execution
 	 * should resume in the normal world.
 	 */
 	case TEESMC_OPTEED_RETURN_FIQ_DONE:
 		/* Get a reference to the non-secure context */
 		ns_cpu_context = cm_get_context(NON_SECURE);
 		assert(ns_cpu_context);

 		/*
 		 * Restore non-secure state. There is no need to save the
 		 * secure system register context since OPTEE was supposed
 		 * to preserve it during S-EL1 interrupt handling.
 		 */
 		cm_el1_sysregs_context_restore(NON_SECURE);
 		cm_set_next_eret_context(NON_SECURE);

 		SMC_RET0((uint64_t) ns_cpu_context);

 	default:
 		panic();
 	}
 }

 /* Define an OPTEED runtime service descriptor for fast SMC calls */
 DECLARE_RT_SVC(
 	opteed_fast,

 	OEN_TOS_START,
 	OEN_TOS_END,
 	SMC_TYPE_FAST,
 	opteed_setup,
 	opteed_smc_handler
 );

 /* Define an OPTEED runtime service descriptor for yielding SMC calls */
 DECLARE_RT_SVC(
 	opteed_std,

 	OEN_TOS_START,
 	OEN_TOS_END,
 	SMC_TYPE_YIELD,
 	NULL,
 	opteed_smc_handler
 );
	/*
	* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/


	/*******************************************************************************
	* This is the Secure Payload Dispatcher (SPD). The dispatcher is meant to be a
	* plug-in component to the Secure Monitor, registered as a runtime service. The
	* SPD is expected to be a functional extension of the Secure Payload (SP) that
	* executes in Secure EL1. The Secure Monitor will delegate all SMCs targeting
	* the Trusted OS/Applications range to the dispatcher. The SPD will either
	* handle the request locally or delegate it to the Secure Payload. It is also
	* responsible for initialising and maintaining communication with the SP.
	******************************************************************************/
	#include <arch_helpers.h>
	#include <assert.h>
	#include <bl31.h>
	#include <bl_common.h>
	#include <context_mgmt.h>
	#include <debug.h>
	#include <errno.h>
	#include <platform.h>
	#include <runtime_svc.h>
	#include <stddef.h>
	#include <uuid.h>
	#include "opteed_private.h"
	#include "teesmc_opteed.h"
	#include "teesmc_opteed_macros.h"


	/*******************************************************************************
	* Address of the entrypoint vector table in OPTEE. It is
	* initialised once on the primary core after a cold boot.
	******************************************************************************/
	optee_vectors_t *optee_vectors;

	/*******************************************************************************
	* Array to keep track of per-cpu OPTEE state
	******************************************************************************/
	optee_context_t opteed_sp_context[OPTEED_CORE_COUNT];
	uint32_t opteed_rw;

	static int32_t opteed_init(void);

	/*******************************************************************************
	* This function is the handler registered for S-EL1 interrupts by the
	* OPTEED. It validates the interrupt and upon success arranges entry into
	* the OPTEE at 'optee_fiq_entry()' for handling the interrupt.
	******************************************************************************/
	static uint64_t opteed_sel1_interrupt_handler(uint32_t id,
	uint32_t flags,
	void *handle,
	void *cookie)
	{
	uint32_t linear_id;
	optee_context_t *optee_ctx;

	/* Check the security state when the exception was generated */
	assert(get_interrupt_src_ss(flags) == NON_SECURE);

	/* Sanity check the pointer to this cpu's context */
	assert(handle == cm_get_context(NON_SECURE));

	/* Save the non-secure context before entering the OPTEE */
	cm_el1_sysregs_context_save(NON_SECURE);

	/* Get a reference to this cpu's OPTEE context */
	linear_id = plat_my_core_pos();
	optee_ctx = &opteed_sp_context[linear_id];
	assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));

	cm_set_elr_el3(SECURE, (uint64_t)&optee_vectors->fiq_entry);
	cm_el1_sysregs_context_restore(SECURE);
	cm_set_next_eret_context(SECURE);

	/*
	* Tell the OPTEE that it has to handle an FIQ (synchronously).
	* Also the instruction in normal world where the interrupt was
	* generated is passed for debugging purposes. It is safe to
	* retrieve this address from ELR_EL3 as the secure context will
	* not take effect until el3_exit().
	*/
	SMC_RET1(&optee_ctx->cpu_ctx, read_elr_el3());
	}

	/*******************************************************************************
	* OPTEE Dispatcher setup. The OPTEED finds out the OPTEE entrypoint and type
	* (aarch32/aarch64) if not already known and initialises the context for entry
	* into OPTEE for its initialization.
	******************************************************************************/
	static int32_t opteed_setup(void)
	{
	entry_point_info_t *optee_ep_info;
	uint32_t linear_id;
	uint64_t opteed_pageable_part;
	uint64_t opteed_mem_limit;
	uint64_t dt_addr;

	linear_id = plat_my_core_pos();

	/*
	* Get information about the Secure Payload (BL32) image. Its
	* absence is a critical failure. TODO: Add support to
	* conditionally include the SPD service
	*/
	optee_ep_info = bl31_plat_get_next_image_ep_info(SECURE);
	if (!optee_ep_info) {
	WARN("No OPTEE provided by BL2 boot loader, Booting device"
	" without OPTEE initialization. SMC`s destined for OPTEE"
	" will return SMC_UNK\n");
	return 1;
	}

	/*
	* If there's no valid entry point for SP, we return a non-zero value
	* signalling failure initializing the service. We bail out without
	* registering any handlers
	*/
	if (!optee_ep_info->pc)
	return 1;

	opteed_rw = optee_ep_info->args.arg0;
	opteed_pageable_part = optee_ep_info->args.arg1;
	opteed_mem_limit = optee_ep_info->args.arg2;
	dt_addr = optee_ep_info->args.arg3;

	opteed_init_optee_ep_state(optee_ep_info,
	opteed_rw,
	optee_ep_info->pc,
	opteed_pageable_part,
	opteed_mem_limit,
	dt_addr,
	&opteed_sp_context[linear_id]);

	/*
	* All OPTEED initialization done. Now register our init function with
	* BL31 for deferred invocation
	*/
	bl31_register_bl32_init(&opteed_init);

	return 0;
	}

	/*******************************************************************************
	* This function passes control to the OPTEE image (BL32) for the first time
	* on the primary cpu after a cold boot. It assumes that a valid secure
	* context has already been created by opteed_setup() which can be directly
	* used. It also assumes that a valid non-secure context has been
	* initialised by PSCI so it does not need to save and restore any
	* non-secure state. This function performs a synchronous entry into
	* OPTEE. OPTEE passes control back to this routine through a SMC.
	******************************************************************************/
	static int32_t opteed_init(void)
	{
	uint32_t linear_id = plat_my_core_pos();
	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
	entry_point_info_t *optee_entry_point;
	uint64_t rc;

	/*
	* Get information about the OPTEE (BL32) image. Its
	* absence is a critical failure.
	*/
	optee_entry_point = bl31_plat_get_next_image_ep_info(SECURE);
	assert(optee_entry_point);

	cm_init_my_context(optee_entry_point);

	/*
	* Arrange for an entry into OPTEE. It will be returned via
	* OPTEE_ENTRY_DONE case
	*/
	rc = opteed_synchronous_sp_entry(optee_ctx);
	assert(rc != 0);

	return rc;
	}


	/*******************************************************************************
	* This function is responsible for handling all SMCs in the Trusted OS/App
	* range from the non-secure state as defined in the SMC Calling Convention
	* Document. It is also responsible for communicating with the Secure
	* payload to delegate work and return results back to the non-secure
	* state. Lastly it will also return any information that OPTEE needs to do
	* the work assigned to it.
	******************************************************************************/
	static uintptr_t opteed_smc_handler(uint32_t smc_fid,
	u_register_t x1,
	u_register_t x2,
	u_register_t x3,
	u_register_t x4,
	void *cookie,
	void *handle,
	u_register_t flags)
	{
	cpu_context_t *ns_cpu_context;
	uint32_t linear_id = plat_my_core_pos();
	optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
	uint64_t rc;

	/*
	* Determine which security state this SMC originated from
	*/

	if (is_caller_non_secure(flags)) {
	/*
	* This is a fresh request from the non-secure client.
	* The parameters are in x1 and x2. Figure out which
	* registers need to be preserved, save the non-secure
	* state and send the request to the secure payload.
	*/
	assert(handle == cm_get_context(NON_SECURE));

	cm_el1_sysregs_context_save(NON_SECURE);

	/*
	* We are done stashing the non-secure context. Ask the
	* OPTEE to do the work now.
	*/

	/*
	* Verify if there is a valid context to use, copy the
	* operation type and parameters to the secure context
	* and jump to the fast smc entry point in the secure
	* payload. Entry into S-EL1 will take place upon exit
	* from this function.
	*/
	assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));

	/* Set appropriate entry for SMC.
	* We expect OPTEE to manage the PSTATE.I and PSTATE.F
	* flags as appropriate.
	*/
	if (GET_SMC_TYPE(smc_fid) == SMC_TYPE_FAST) {
	cm_set_elr_el3(SECURE, (uint64_t)
	&optee_vectors->fast_smc_entry);
	} else {
	cm_set_elr_el3(SECURE, (uint64_t)
	&optee_vectors->yield_smc_entry);
	}

	cm_el1_sysregs_context_restore(SECURE);
	cm_set_next_eret_context(SECURE);

	write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
	CTX_GPREG_X4,
	read_ctx_reg(get_gpregs_ctx(handle),
	CTX_GPREG_X4));
	write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
	CTX_GPREG_X5,
	read_ctx_reg(get_gpregs_ctx(handle),
	CTX_GPREG_X5));
	write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
	CTX_GPREG_X6,
	read_ctx_reg(get_gpregs_ctx(handle),
	CTX_GPREG_X6));
	/* Propagate hypervisor client ID */
	write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
	CTX_GPREG_X7,
	read_ctx_reg(get_gpregs_ctx(handle),
	CTX_GPREG_X7));

	SMC_RET4(&optee_ctx->cpu_ctx, smc_fid, x1, x2, x3);
	}

	/*
	* Returning from OPTEE
	*/

	switch (smc_fid) {
	/*
	* OPTEE has finished initialising itself after a cold boot
	*/
	case TEESMC_OPTEED_RETURN_ENTRY_DONE:
	/*
	* Stash the OPTEE entry points information. This is done
	* only once on the primary cpu
	*/
	assert(optee_vectors == NULL);
	optee_vectors = (optee_vectors_t *) x1;

	if (optee_vectors) {
	set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_ON);

	/*
	* OPTEE has been successfully initialized.
	* Register power management hooks with PSCI
	*/
	psci_register_spd_pm_hook(&opteed_pm);

	/*
	* Register an interrupt handler for S-EL1 interrupts
	* when generated during code executing in the
	* non-secure state.
	*/
	flags = 0;
	set_interrupt_rm_flag(flags, NON_SECURE);
	rc = register_interrupt_type_handler(INTR_TYPE_S_EL1,
	opteed_sel1_interrupt_handler,
	flags);
	if (rc)
	panic();
	}

	/*
	* OPTEE reports completion. The OPTEED must have initiated
	* the original request through a synchronous entry into
	* OPTEE. Jump back to the original C runtime context.
	*/
	opteed_synchronous_sp_exit(optee_ctx, x1);
	break;


	/*
	* These function IDs is used only by OP-TEE to indicate it has
	* finished:
	* 1. turning itself on in response to an earlier psci
	* cpu_on request
	* 2. resuming itself after an earlier psci cpu_suspend
	* request.
	*/
	case TEESMC_OPTEED_RETURN_ON_DONE:
	case TEESMC_OPTEED_RETURN_RESUME_DONE:


	/*
	* These function IDs is used only by the SP to indicate it has
	* finished:
	* 1. suspending itself after an earlier psci cpu_suspend
	* request.
	* 2. turning itself off in response to an earlier psci
	* cpu_off request.
	*/
	case TEESMC_OPTEED_RETURN_OFF_DONE:
	case TEESMC_OPTEED_RETURN_SUSPEND_DONE:
	case TEESMC_OPTEED_RETURN_SYSTEM_OFF_DONE:
	case TEESMC_OPTEED_RETURN_SYSTEM_RESET_DONE:

	/*
	* OPTEE reports completion. The OPTEED must have initiated the
	* original request through a synchronous entry into OPTEE.
	* Jump back to the original C runtime context, and pass x1 as
	* return value to the caller
	*/
	opteed_synchronous_sp_exit(optee_ctx, x1);
	break;

	/*
	* OPTEE is returning from a call or being preempted from a call, in
	* either case execution should resume in the normal world.
	*/
	case TEESMC_OPTEED_RETURN_CALL_DONE:
	/*
	* This is the result from the secure client of an
	* earlier request. The results are in x0-x3. Copy it
	* into the non-secure context, save the secure state
	* and return to the non-secure state.
	*/
	assert(handle == cm_get_context(SECURE));
	cm_el1_sysregs_context_save(SECURE);

	/* Get a reference to the non-secure context */
	ns_cpu_context = cm_get_context(NON_SECURE);
	assert(ns_cpu_context);

	/* Restore non-secure state */
	cm_el1_sysregs_context_restore(NON_SECURE);
	cm_set_next_eret_context(NON_SECURE);

	SMC_RET4(ns_cpu_context, x1, x2, x3, x4);

	/*
	* OPTEE has finished handling a S-EL1 FIQ interrupt. Execution
	* should resume in the normal world.
	*/
	case TEESMC_OPTEED_RETURN_FIQ_DONE:
	/* Get a reference to the non-secure context */
	ns_cpu_context = cm_get_context(NON_SECURE);
	assert(ns_cpu_context);

	/*
	* Restore non-secure state. There is no need to save the
	* secure system register context since OPTEE was supposed
	* to preserve it during S-EL1 interrupt handling.
	*/
	cm_el1_sysregs_context_restore(NON_SECURE);
	cm_set_next_eret_context(NON_SECURE);

	SMC_RET0((uint64_t) ns_cpu_context);

	default:
	panic();
	}
	}

	/* Define an OPTEED runtime service descriptor for fast SMC calls */
	DECLARE_RT_SVC(
	opteed_fast,

	OEN_TOS_START,
	OEN_TOS_END,
	SMC_TYPE_FAST,
	opteed_setup,
	opteed_smc_handler
	);

	/* Define an OPTEED runtime service descriptor for yielding SMC calls */
	DECLARE_RT_SVC(
	opteed_std,

	OEN_TOS_START,
	OEN_TOS_END,
	SMC_TYPE_YIELD,
	NULL,
	opteed_smc_handler
	);