| # |
| # Copyright 2018-2021 NXP |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| # |
| # |
| #------------------------------------------------------------------------------ |
| # |
| # This file contains the basic architecture definitions that drive the build |
| # |
| # ----------------------------------------------------------------------------- |
| |
| CORE_TYPE := a72 |
| |
| CACHE_LINE := 6 |
| |
| # Set to GIC400 or GIC500 |
| GIC := GIC500 |
| |
| # Set to CCI400 or CCN504 or CCN508 |
| INTERCONNECT := CCI400 |
| |
| # Layerscape chassis level - set to 3=LSCH3 or 2=LSCH2 |
| CHASSIS := 3_2 |
| |
| # TZC used is TZC380 or TZC400 |
| TZC_ID := TZC400 |
| |
| # CONSOLE is NS16550 or PL011 |
| CONSOLE := NS16550 |
| |
| # DDR PHY generation to be used |
| PLAT_DDR_PHY := PHY_GEN1 |
| |
| PHYS_SYS := 64 |
| |
| # Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def |
| # Input to CST create_hdr_esbc tool |
| CSF_HDR_SZ := 0x3000 |
| |
| # In IMAGE_BL2, compile time flag for handling Cache coherency |
| # with CAAM for BL2 running from OCRAM |
| SEC_MEM_NON_COHERENT := yes |
| |
| # OCRAM MAP for BL2 |
| # Before BL2 |
| # 0x18000000 - 0x18009fff -> Used by ROM code |
| # 0x1800a000 - 0x1800dfff -> CSF header for BL2 |
| # For FlexSFlexSPI boot |
| # 0x1800e000 - 0x18040000 -> Reserved for BL2 binary |
| # For SD boot |
| # 0x1800e000 - 0x18030000 -> Reserved for BL2 binary |
| # 0x18030000 - 0x18040000 -> Reserved for SD buffer |
| OCRAM_START_ADDR := 0x18000000 |
| OCRAM_SIZE := 0x40000 |
| |
| # Area of OCRAM reserved by ROM code |
| NXP_ROM_RSVD := 0xa000 |
| |
| # Location of BL2 on OCRAM |
| BL2_BASE_ADDR := $(shell echo $$(( $(OCRAM_START_ADDR) + $(NXP_ROM_RSVD) + $(CSF_HDR_SZ) ))) |
| |
| # Covert to HEX to be used by create_pbl.mk |
| BL2_BASE := $(shell echo "0x"$$(echo "obase=16; ${BL2_BASE_ADDR}" | bc)) |
| |
| # BL2_HDR_LOC is at (BL2_BASE + NXP_ROM_RSVD) |
| # This value BL2_HDR_LOC + CSF_HDR_SZ should not |
| # overalp with BL2_BASE |
| # Input to CST create_hdr_isbc tool |
| BL2_HDR_LOC := 0x1800A000 |
| |
| # SoC ERRATAS to be enabled |
| |
| # DDR ERRATA |
| ERRATA_DDR_A009803 := 1 |
| ERRATA_DDR_A009942 := 1 |
| ERRATA_DDR_A010165 := 1 |
| |
| # Enable dynamic memory mapping |
| PLAT_XLAT_TABLES_DYNAMIC := 1 |
| |
| # Define Endianness of each module |
| NXP_GUR_ENDIANNESS := LE |
| NXP_DDR_ENDIANNESS := LE |
| NXP_SEC_ENDIANNESS := LE |
| NXP_SFP_ENDIANNESS := LE |
| NXP_SNVS_ENDIANNESS := LE |
| NXP_ESDHC_ENDIANNESS := LE |
| NXP_QSPI_ENDIANNESS := LE |
| NXP_FSPI_ENDIANNESS := LE |
| NXP_SCFG_ENDIANNESS := LE |
| NXP_GPIO_ENDIANNESS := LE |
| |
| NXP_SFP_VER := 3_4 |
| |
| # OCRAM ECC Enabled |
| OCRAM_ECC_EN := yes |