| /* |
| * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved. |
| * Copyright (c) 2022, NVIDIA Corporation. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| |
| #include <assert_macros.S> |
| #include <asm_macros.S> |
| #include <assert_macros.S> |
| #include <bl31/ea_handle.h> |
| #include <context.h> |
| #include <lib/extensions/ras_arch.h> |
| #include <cpu_macros.S> |
| #include <context.h> |
| |
| .globl handle_lower_el_ea_esb |
| .globl handle_lower_el_sync_ea |
| .globl handle_lower_el_async_ea |
| |
| |
| /* |
| * Function to delegate External Aborts synchronized by ESB instruction at EL3 |
| * vector entry. This function assumes GP registers x0-x29 have been saved, and |
| * are available for use. It delegates the handling of the EA to platform |
| * handler, and returns only upon successfully handling the EA; otherwise |
| * panics. On return from this function, the original exception handler is |
| * expected to resume. |
| */ |
| func handle_lower_el_ea_esb |
| mov x0, #ERROR_EA_ESB |
| mrs x1, DISR_EL1 |
| b ea_proceed |
| endfunc handle_lower_el_ea_esb |
| |
| |
| /* |
| * This function forms the tail end of Synchronous Exception entry from lower |
| * EL, and expects to handle Synchronous External Aborts from lower EL and CPU |
| * Implementation Defined Exceptions. If any other kind of exception is detected, |
| * then this function reports unhandled exception. |
| * |
| * It delegates the handling of the EA to platform handler, and upon successfully |
| * handling the EA, exits EL3; otherwise panics. |
| * |
| * This function assumes x30 has been saved. |
| */ |
| func handle_lower_el_sync_ea |
| mrs x30, esr_el3 |
| ubfx x30, x30, #ESR_EC_SHIFT, #ESR_EC_LENGTH |
| |
| /* Check for I/D aborts from lower EL */ |
| cmp x30, #EC_IABORT_LOWER_EL |
| b.eq 1f |
| |
| cmp x30, #EC_DABORT_LOWER_EL |
| b.eq 1f |
| |
| /* Save GP registers */ |
| stp x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0] |
| stp x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2] |
| stp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4] |
| |
| /* Get the cpu_ops pointer */ |
| bl get_cpu_ops_ptr |
| |
| /* Get the cpu_ops exception handler */ |
| ldr x0, [x0, #CPU_E_HANDLER_FUNC] |
| |
| /* |
| * If the reserved function pointer is NULL, this CPU does not have an |
| * implementation defined exception handler function |
| */ |
| cbz x0, 2f |
| mrs x1, esr_el3 |
| ubfx x1, x1, #ESR_EC_SHIFT, #ESR_EC_LENGTH |
| blr x0 |
| b 2f |
| |
| 1: |
| /* |
| * Save general purpose and ARMv8.3-PAuth registers (if enabled). |
| * If Secure Cycle Counter is not disabled in MDCR_EL3 when |
| * ARMv8.5-PMU is implemented, save PMCR_EL0 and disable Cycle Counter. |
| * Also set the PSTATE to a known state. |
| */ |
| bl prepare_el3_entry |
| |
| #if ENABLE_PAUTH |
| /* Load and program APIAKey firmware key */ |
| bl pauth_load_bl31_apiakey |
| #endif |
| |
| /* Setup exception class and syndrome arguments for platform handler */ |
| mov x0, #ERROR_EA_SYNC |
| mrs x1, esr_el3 |
| bl delegate_sync_ea |
| |
| /* el3_exit assumes SP_EL0 on entry */ |
| msr spsel, #MODE_SP_EL0 |
| b el3_exit |
| 2: |
| ldp x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0] |
| ldp x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2] |
| ldp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4] |
| |
| /* Synchronous exceptions other than the above are assumed to be EA */ |
| ldr x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR] |
| no_ret report_unhandled_exception |
| endfunc handle_lower_el_sync_ea |
| |
| |
| /* |
| * This function handles SErrors from lower ELs. |
| * |
| * It delegates the handling of the EA to platform handler, and upon successfully |
| * handling the EA, exits EL3; otherwise panics. |
| * |
| * This function assumes x30 has been saved. |
| */ |
| func handle_lower_el_async_ea |
| |
| /* |
| * Save general purpose and ARMv8.3-PAuth registers (if enabled). |
| * If Secure Cycle Counter is not disabled in MDCR_EL3 when |
| * ARMv8.5-PMU is implemented, save PMCR_EL0 and disable Cycle Counter. |
| * Also set the PSTATE to a known state. |
| */ |
| bl prepare_el3_entry |
| |
| #if ENABLE_PAUTH |
| /* Load and program APIAKey firmware key */ |
| bl pauth_load_bl31_apiakey |
| #endif |
| |
| /* Setup exception class and syndrome arguments for platform handler */ |
| mov x0, #ERROR_EA_ASYNC |
| mrs x1, esr_el3 |
| bl delegate_async_ea |
| |
| /* el3_exit assumes SP_EL0 on entry */ |
| msr spsel, #MODE_SP_EL0 |
| b el3_exit |
| endfunc handle_lower_el_async_ea |
| |
| |
| /* |
| * Prelude for Synchronous External Abort handling. This function assumes that |
| * all GP registers have been saved by the caller. |
| * |
| * x0: EA reason |
| * x1: EA syndrome |
| */ |
| func delegate_sync_ea |
| #if RAS_EXTENSION |
| /* |
| * Check for Uncontainable error type. If so, route to the platform |
| * fatal error handler rather than the generic EA one. |
| */ |
| ubfx x2, x1, #EABORT_SET_SHIFT, #EABORT_SET_WIDTH |
| cmp x2, #ERROR_STATUS_SET_UC |
| b.ne 1f |
| |
| /* Check fault status code */ |
| ubfx x3, x1, #EABORT_DFSC_SHIFT, #EABORT_DFSC_WIDTH |
| cmp x3, #SYNC_EA_FSC |
| b.ne 1f |
| |
| no_ret plat_handle_uncontainable_ea |
| 1: |
| #endif |
| |
| b ea_proceed |
| endfunc delegate_sync_ea |
| |
| |
| /* |
| * Prelude for Asynchronous External Abort handling. This function assumes that |
| * all GP registers have been saved by the caller. |
| * |
| * x0: EA reason |
| * x1: EA syndrome |
| */ |
| func delegate_async_ea |
| #if RAS_EXTENSION |
| /* Check Exception Class to ensure SError, as this function should |
| * only be invoked for SError. If that is not the case, which implies |
| * either an HW error or programming error, panic. |
| */ |
| ubfx x2, x1, #ESR_EC_SHIFT, #ESR_EC_LENGTH |
| cmp x2, EC_SERROR |
| b.ne do_panic |
| /* |
| * Check for Implementation Defined Syndrome. If so, skip checking |
| * Uncontainable error type from the syndrome as the format is unknown. |
| */ |
| tbnz x1, #SERROR_IDS_BIT, 1f |
| |
| /* AET only valid when DFSC is 0x11 */ |
| ubfx x2, x1, #EABORT_DFSC_SHIFT, #EABORT_DFSC_WIDTH |
| cmp x2, #DFSC_SERROR |
| b.ne 1f |
| |
| /* |
| * Check for Uncontainable error type. If so, route to the platform |
| * fatal error handler rather than the generic EA one. |
| */ |
| ubfx x3, x1, #EABORT_AET_SHIFT, #EABORT_AET_WIDTH |
| cmp x3, #ERROR_STATUS_UET_UC |
| b.ne 1f |
| |
| no_ret plat_handle_uncontainable_ea |
| 1: |
| #endif |
| |
| b ea_proceed |
| endfunc delegate_async_ea |
| |
| |
| /* |
| * Delegate External Abort handling to platform's EA handler. This function |
| * assumes that all GP registers have been saved by the caller. |
| * |
| * x0: EA reason |
| * x1: EA syndrome |
| */ |
| func ea_proceed |
| /* |
| * If the ESR loaded earlier is not zero, we were processing an EA |
| * already, and this is a double fault. |
| */ |
| ldr x5, [sp, #CTX_EL3STATE_OFFSET + CTX_ESR_EL3] |
| cbz x5, 1f |
| no_ret plat_handle_double_fault |
| |
| 1: |
| /* Save EL3 state */ |
| mrs x2, spsr_el3 |
| mrs x3, elr_el3 |
| stp x2, x3, [sp, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3] |
| |
| /* |
| * Save ESR as handling might involve lower ELs, and returning back to |
| * EL3 from there would trample the original ESR. |
| */ |
| mrs x4, scr_el3 |
| mrs x5, esr_el3 |
| stp x4, x5, [sp, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3] |
| |
| /* |
| * Setup rest of arguments, and call platform External Abort handler. |
| * |
| * x0: EA reason (already in place) |
| * x1: Exception syndrome (already in place). |
| * x2: Cookie (unused for now). |
| * x3: Context pointer. |
| * x4: Flags (security state from SCR for now). |
| */ |
| mov x2, xzr |
| mov x3, sp |
| ubfx x4, x4, #0, #1 |
| |
| /* Switch to runtime stack */ |
| ldr x5, [sp, #CTX_EL3STATE_OFFSET + CTX_RUNTIME_SP] |
| msr spsel, #MODE_SP_EL0 |
| mov sp, x5 |
| |
| mov x29, x30 |
| #if ENABLE_ASSERTIONS |
| /* Stash the stack pointer */ |
| mov x28, sp |
| #endif |
| bl plat_ea_handler |
| |
| #if ENABLE_ASSERTIONS |
| /* |
| * Error handling flows might involve long jumps; so upon returning from |
| * the platform error handler, validate that the we've completely |
| * unwound the stack. |
| */ |
| mov x27, sp |
| cmp x28, x27 |
| ASM_ASSERT(eq) |
| #endif |
| |
| /* Make SP point to context */ |
| msr spsel, #MODE_SP_ELX |
| |
| /* Restore EL3 state and ESR */ |
| ldp x1, x2, [sp, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3] |
| msr spsr_el3, x1 |
| msr elr_el3, x2 |
| |
| /* Restore ESR_EL3 and SCR_EL3 */ |
| ldp x3, x4, [sp, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3] |
| msr scr_el3, x3 |
| msr esr_el3, x4 |
| |
| #if ENABLE_ASSERTIONS |
| cmp x4, xzr |
| ASM_ASSERT(ne) |
| #endif |
| |
| /* Clear ESR storage */ |
| str xzr, [sp, #CTX_EL3STATE_OFFSET + CTX_ESR_EL3] |
| |
| ret x29 |
| endfunc ea_proceed |