blob: 1da8d296cd42806c95967cb8e251d9207088a0ba [file] [log] [blame]
/*
* Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <inttypes.h>
#include <stdbool.h>
#include <stdint.h>
#include <platform_def.h>
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <context.h>
#include <drivers/arm/cci.h>
#include <drivers/console.h>
#include <lib/el3_runtime/context_mgmt.h>
#include <lib/mmio.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <plat/common/platform.h>
#include <imx8qx_pads.h>
#include <imx8_iomux.h>
#include <imx8_lpuart.h>
#include <plat_imx8.h>
#include <sci/sci.h>
#include <sec_rsrc.h>
static const unsigned long BL31_COHERENT_RAM_START = BL_COHERENT_RAM_BASE;
static const unsigned long BL31_COHERENT_RAM_END = BL_COHERENT_RAM_END;
static const unsigned long BL31_RO_START = BL_CODE_BASE;
static const unsigned long BL31_RO_END = BL_CODE_END;
static const unsigned long BL31_RW_END = BL_END;
IMPORT_SYM(unsigned long, __RW_START__, BL31_RW_START);
static entry_point_info_t bl32_image_ep_info;
static entry_point_info_t bl33_image_ep_info;
/* Default configuration for i.MX8QM/QXP MEK */
#if defined(IMX_USE_UART0)
#define UART_PAD_CTRL (PADRING_IFMUX_EN_MASK | PADRING_GP_EN_MASK | \
(SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
(SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
(SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \
(SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT))
#define IMX_RES_UART SC_R_UART_0
#define IMX_PAD_UART_RX SC_P_UART0_RX
#define IMX_PAD_UART_TX SC_P_UART0_TX
/*
* On Toradex Colibri i.MX8QXP UART3 on the FLEXCAN2.
* Use custom pad control for this
*/
#elif defined(IMX_USE_UART3)
/*
* FLEXCAN2_RX/TX pads are muxed to ADMA_UART3_RX/TX,
* For ref:
* 000b - ADMA_FLEXCAN2_RX
* 001b - ADMA_SAI3_RXD
* 010b - ADMA_UART3_RX
* 011b - ADMA_SAI1_RXFS
* 100b - LSIO_GPIO1_IO19
*/
#define UART_PAD_CTRL (PADRING_IFMUX_EN_MASK | PADRING_GP_EN_MASK | \
(SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
(2U << PADRING_IFMUX_SHIFT) | \
(SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
(SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \
(SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT))
#define IMX_RES_UART SC_R_UART_3
#define IMX_PAD_UART_RX SC_P_FLEXCAN2_RX
#define IMX_PAD_UART_TX SC_P_FLEXCAN2_TX
#else
#error "Provide proper UART configuration in IMX_DEBUG_UART"
#endif
static const mmap_region_t imx_mmap[] = {
MAP_REGION_FLAT(IMX_REG_BASE, IMX_REG_SIZE, MT_DEVICE | MT_RW),
{0}
};
static uint32_t get_spsr_for_bl33_entry(void)
{
unsigned long el_status;
unsigned long mode;
uint32_t spsr;
/* figure out what mode we enter the non-secure world */
el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
el_status &= ID_AA64PFR0_ELX_MASK;
mode = (el_status) ? MODE_EL2 : MODE_EL1;
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
#if DEBUG_CONSOLE_A35
static void lpuart32_serial_setbrg(unsigned int base, int baudrate)
{
unsigned int sbr, osr, baud_diff, tmp_osr, tmp_sbr;
unsigned int diff1, diff2, tmp, rate;
if (baudrate == 0)
panic();
sc_pm_get_clock_rate(ipc_handle, IMX_RES_UART, 2, &rate);
baud_diff = baudrate;
osr = 0;
sbr = 0;
for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
tmp_sbr = (rate / (baudrate * tmp_osr));
if (tmp_sbr == 0)
tmp_sbr = 1;
/* calculate difference in actual baud w/ current values */
diff1 = rate / (tmp_osr * tmp_sbr) - baudrate;
diff2 = rate / (tmp_osr * (tmp_sbr + 1));
/* select best values between sbr and sbr+1 */
if (diff1 > (baudrate - diff2)) {
diff1 = baudrate - diff2;
tmp_sbr++;
}
if (diff1 <= baud_diff) {
baud_diff = diff1;
osr = tmp_osr;
sbr = tmp_sbr;
}
}
tmp = mmio_read_32(IMX_BOOT_UART_BASE + BAUD);
if ((osr > 3) && (osr < 8))
tmp |= LPUART_BAUD_BOTHEDGE_MASK;
tmp &= ~LPUART_BAUD_OSR_MASK;
tmp |= LPUART_BAUD_OSR(osr - 1);
tmp &= ~LPUART_BAUD_SBR_MASK;
tmp |= LPUART_BAUD_SBR(sbr);
/* explicitly disable 10 bit mode & set 1 stop bit */
tmp &= ~(LPUART_BAUD_M10_MASK | LPUART_BAUD_SBNS_MASK);
mmio_write_32(IMX_BOOT_UART_BASE + BAUD, tmp);
}
static int lpuart32_serial_init(unsigned int base)
{
unsigned int tmp;
/* disable TX & RX before enabling clocks */
tmp = mmio_read_32(IMX_BOOT_UART_BASE + CTRL);
tmp &= ~(CTRL_TE | CTRL_RE);
mmio_write_32(IMX_BOOT_UART_BASE + CTRL, tmp);
mmio_write_32(IMX_BOOT_UART_BASE + MODIR, 0);
mmio_write_32(IMX_BOOT_UART_BASE + FIFO, ~(FIFO_TXFE | FIFO_RXFE));
mmio_write_32(IMX_BOOT_UART_BASE + MATCH, 0);
/* provide data bits, parity, stop bit, etc */
lpuart32_serial_setbrg(base, IMX_BOOT_UART_BAUDRATE);
/* eight data bits no parity bit */
tmp = mmio_read_32(IMX_BOOT_UART_BASE + CTRL);
tmp &= ~(LPUART_CTRL_PE_MASK | LPUART_CTRL_PT_MASK | LPUART_CTRL_M_MASK);
mmio_write_32(IMX_BOOT_UART_BASE + CTRL, tmp);
mmio_write_32(IMX_BOOT_UART_BASE + CTRL, CTRL_RE | CTRL_TE);
mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x55);
mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x55);
mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x0A);
return 0;
}
#endif
void imx8_partition_resources(void)
{
sc_rm_pt_t secure_part, os_part;
sc_rm_mr_t mr, mr_record = 64;
sc_faddr_t start, end;
sc_err_t err;
bool owned;
int i;
err = sc_rm_get_partition(ipc_handle, &secure_part);
if (err)
ERROR("sc_rm_get_partition failed: %u\n", err);
err = sc_rm_partition_alloc(ipc_handle, &os_part, false, false,
false, false, false);
if (err)
ERROR("sc_rm_partition_alloc failed: %u\n", err);
err = sc_rm_set_parent(ipc_handle, os_part, secure_part);
if (err)
ERROR("sc_rm_set_parent: %u\n", err);
/* set secure resources to NOT-movable */
for (i = 0; i < (ARRAY_SIZE(secure_rsrcs)); i++) {
err = sc_rm_set_resource_movable(ipc_handle,
secure_rsrcs[i], secure_rsrcs[i], false);
if (err)
ERROR("sc_rm_set_resource_movable: rsrc %u, ret %u\n",
secure_rsrcs[i], err);
}
/* move all movable resources and pins to non-secure partition */
err = sc_rm_move_all(ipc_handle, secure_part, os_part, true, true);
if (err)
ERROR("sc_rm_move_all: %u\n", err);
/* iterate through peripherals to give NS OS part access */
for (i = 0; i < ARRAY_SIZE(ns_access_allowed); i++) {
err = sc_rm_set_peripheral_permissions(ipc_handle,
ns_access_allowed[i], os_part, SC_RM_PERM_FULL);
if (err)
ERROR("sc_rm_set_peripheral_permissions: rsrc %u, \
ret %u\n", ns_access_allowed[i], err);
}
/*
* sc_rm_set_peripheral_permissions
* sc_rm_set_memreg_permissions
* sc_rm_set_pin_movable
*/
for (mr = 0; mr < 64; mr++) {
owned = sc_rm_is_memreg_owned(ipc_handle, mr);
if (owned) {
err = sc_rm_get_memreg_info(ipc_handle, mr, &start, &end);
if (err)
ERROR("Memreg get info failed, %u\n", mr);
NOTICE("Memreg %u 0x%" PRIx64 " -- 0x%" PRIx64 "\n", mr, start, end);
if (BL31_BASE >= start && (BL31_LIMIT - 1) <= end) {
mr_record = mr; /* Record the mr for ATF running */
} else {
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 ", \
err %d\n", start, end, err);
}
}
}
if (mr_record != 64) {
err = sc_rm_get_memreg_info(ipc_handle, mr_record, &start, &end);
if (err)
ERROR("Memreg get info failed, %u\n", mr_record);
if ((BL31_LIMIT - 1) < end) {
err = sc_rm_memreg_alloc(ipc_handle, &mr, BL31_LIMIT, end);
if (err)
ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
(sc_faddr_t)BL31_LIMIT, end);
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
(sc_faddr_t)BL31_LIMIT, end);
}
if (start < (BL31_BASE - 1)) {
err = sc_rm_memreg_alloc(ipc_handle, &mr, start, BL31_BASE - 1);
if (err)
ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
start, (sc_faddr_t)BL31_BASE - 1);
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
start, (sc_faddr_t)BL31_BASE - 1);
}
}
if (err)
NOTICE("Partitioning Failed\n");
else
NOTICE("Non-secure Partitioning Succeeded\n");
}
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
#if DEBUG_CONSOLE
static console_t console;
#endif
if (sc_ipc_open(&ipc_handle, SC_IPC_BASE) != SC_ERR_NONE)
panic();
#if DEBUG_CONSOLE_A35
sc_pm_set_resource_power_mode(ipc_handle, IMX_RES_UART,
SC_PM_PW_MODE_ON);
sc_pm_clock_rate_t rate = 80000000;
sc_pm_set_clock_rate(ipc_handle, IMX_RES_UART, 2, &rate);
sc_pm_clock_enable(ipc_handle, IMX_RES_UART, 2, true, false);
/* Configure UART pads */
sc_pad_set(ipc_handle, IMX_PAD_UART_RX, UART_PAD_CTRL);
sc_pad_set(ipc_handle, IMX_PAD_UART_TX, UART_PAD_CTRL);
lpuart32_serial_init(IMX_BOOT_UART_BASE);
#endif
#if DEBUG_CONSOLE
console_lpuart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
IMX_CONSOLE_BAUDRATE, &console);
#endif
/* Turn on MU1 for non-secure OS/Hypervisor */
sc_pm_set_resource_power_mode(ipc_handle, SC_R_MU_1A, SC_PM_PW_MODE_ON);
/* Turn on GPT_0's power & clock for non-secure OS/Hypervisor */
sc_pm_set_resource_power_mode(ipc_handle, SC_R_GPT_0, SC_PM_PW_MODE_ON);
sc_pm_clock_enable(ipc_handle, SC_R_GPT_0, SC_PM_CLK_PER, true, 0);
mmio_write_32(IMX_GPT0_LPCG_BASE, mmio_read_32(IMX_GPT0_LPCG_BASE) | (1 << 25));
/*
* create new partition for non-secure OS/Hypervisor
* uses global structs defined in sec_rsrc.h
*/
imx8_partition_resources();
bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
}
void bl31_plat_arch_setup(void)
{
unsigned long ro_start = BL31_RO_START;
unsigned long ro_size = BL31_RO_END - BL31_RO_START;
unsigned long rw_start = BL31_RW_START;
unsigned long rw_size = BL31_RW_END - BL31_RW_START;
#if USE_COHERENT_MEM
unsigned long coh_start = BL31_COHERENT_RAM_START;
unsigned long coh_size = BL31_COHERENT_RAM_END - BL31_COHERENT_RAM_START;
#endif
mmap_add_region(ro_start, ro_start, ro_size,
MT_RO | MT_MEMORY | MT_SECURE);
mmap_add_region(rw_start, rw_start, rw_size,
MT_RW | MT_MEMORY | MT_SECURE);
mmap_add(imx_mmap);
#if USE_COHERENT_MEM
mmap_add_region(coh_start, coh_start, coh_size,
MT_DEVICE | MT_RW | MT_SECURE);
#endif
init_xlat_tables();
enable_mmu_el3(0);
}
void bl31_platform_setup(void)
{
plat_gic_driver_init();
plat_gic_init();
}
entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
{
if (type == NON_SECURE)
return &bl33_image_ep_info;
if (type == SECURE)
return &bl32_image_ep_info;
return NULL;
}
unsigned int plat_get_syscnt_freq2(void)
{
return COUNTER_FREQUENCY;
}
void bl31_plat_runtime_setup(void)
{
return;
}