blob: 6a3669dec20c7b9e57c1bcd5a2b9ba6601c29fe6 [file] [log] [blame]
/*
* Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#ifdef IMAGE_BL31
#include <cpu_data.h>
#endif
#include <cpu_macros.S>
#include <debug.h>
#include <errata_report.h>
/* Reset fn is needed in BL at reset vector */
#if defined(IMAGE_BL1) || defined(IMAGE_BL31)
/*
* The reset handler common to all platforms. After a matching
* cpu_ops structure entry is found, the correponding reset_handler
* in the cpu_ops is invoked.
* Clobbers: x0 - x19, x30
*/
.globl reset_handler
func reset_handler
mov x19, x30
/* The plat_reset_handler can clobber x0 - x18, x30 */
bl plat_reset_handler
/* Get the matching cpu_ops pointer */
bl get_cpu_ops_ptr
#if ASM_ASSERTION
cmp x0, #0
ASM_ASSERT(ne)
#endif
/* Get the cpu_ops reset handler */
ldr x2, [x0, #CPU_RESET_FUNC]
mov x30, x19
cbz x2, 1f
/* The cpu_ops reset handler can clobber x0 - x19, x30 */
br x2
1:
ret
endfunc reset_handler
#endif /* IMAGE_BL1 || IMAGE_BL31 */
#ifdef IMAGE_BL31 /* The power down core and cluster is needed only in BL31 */
/*
* void prepare_cpu_pwr_dwn(unsigned int power_level)
*
* Prepare CPU power down function for all platforms. The function takes
* a domain level to be powered down as its parameter. After the cpu_ops
* pointer is retrieved from cpu_data, the handler for requested power
* level is called.
*/
.globl prepare_cpu_pwr_dwn
func prepare_cpu_pwr_dwn
/*
* If the given power level exceeds CPU_MAX_PWR_DWN_OPS, we call the
* power down handler for the last power level
*/
mov_imm x2, (CPU_MAX_PWR_DWN_OPS - 1)
cmp x0, x2
csel x2, x2, x0, hi
mrs x1, tpidr_el3
ldr x0, [x1, #CPU_DATA_CPU_OPS_PTR]
#if ASM_ASSERTION
cmp x0, #0
ASM_ASSERT(ne)
#endif
/* Get the appropriate power down handler */
mov x1, #CPU_PWR_DWN_OPS
add x1, x1, x2, lsl #3
ldr x1, [x0, x1]
br x1
endfunc prepare_cpu_pwr_dwn
/*
* Initializes the cpu_ops_ptr if not already initialized
* in cpu_data. This can be called without a runtime stack, but may
* only be called after the MMU is enabled.
* clobbers: x0 - x6, x10
*/
.globl init_cpu_ops
func init_cpu_ops
mrs x6, tpidr_el3
ldr x0, [x6, #CPU_DATA_CPU_OPS_PTR]
cbnz x0, 1f
mov x10, x30
bl get_cpu_ops_ptr
#if ASM_ASSERTION
cmp x0, #0
ASM_ASSERT(ne)
#endif
str x0, [x6, #CPU_DATA_CPU_OPS_PTR]!
mov x30, x10
1:
ret
endfunc init_cpu_ops
#endif /* IMAGE_BL31 */
#if defined(IMAGE_BL31) && CRASH_REPORTING
/*
* The cpu specific registers which need to be reported in a crash
* are reported via cpu_ops cpu_reg_dump function. After a matching
* cpu_ops structure entry is found, the correponding cpu_reg_dump
* in the cpu_ops is invoked.
*/
.globl do_cpu_reg_dump
func do_cpu_reg_dump
mov x16, x30
/* Get the matching cpu_ops pointer */
bl get_cpu_ops_ptr
cbz x0, 1f
/* Get the cpu_ops cpu_reg_dump */
ldr x2, [x0, #CPU_REG_DUMP]
cbz x2, 1f
blr x2
1:
mov x30, x16
ret
endfunc do_cpu_reg_dump
#endif
/*
* The below function returns the cpu_ops structure matching the
* midr of the core. It reads the MIDR_EL1 and finds the matching
* entry in cpu_ops entries. Only the implementation and part number
* are used to match the entries.
* Return :
* x0 - The matching cpu_ops pointer on Success
* x0 - 0 on failure.
* Clobbers : x0 - x5
*/
.globl get_cpu_ops_ptr
func get_cpu_ops_ptr
/* Get the cpu_ops start and end locations */
adr x4, (__CPU_OPS_START__ + CPU_MIDR)
adr x5, (__CPU_OPS_END__ + CPU_MIDR)
/* Initialize the return parameter */
mov x0, #0
/* Read the MIDR_EL1 */
mrs x2, midr_el1
mov_imm x3, CPU_IMPL_PN_MASK
/* Retain only the implementation and part number using mask */
and w2, w2, w3
1:
/* Check if we have reached end of list */
cmp x4, x5
b.eq error_exit
/* load the midr from the cpu_ops */
ldr x1, [x4], #CPU_OPS_SIZE
and w1, w1, w3
/* Check if midr matches to midr of this core */
cmp w1, w2
b.ne 1b
/* Subtract the increment and offset to get the cpu-ops pointer */
sub x0, x4, #(CPU_OPS_SIZE + CPU_MIDR)
error_exit:
ret
endfunc get_cpu_ops_ptr
/*
* Extract CPU revision and variant, and combine them into a single numeric for
* easier comparison.
*/
.globl cpu_get_rev_var
func cpu_get_rev_var
mrs x1, midr_el1
/*
* Extract the variant[23:20] and revision[3:0] from MIDR, and pack them
* as variant[7:4] and revision[3:0] of x0.
*
* First extract x1[23:16] to x0[7:0] and zero fill the rest. Then
* extract x1[3:0] into x0[3:0] retaining other bits.
*/
ubfx x0, x1, #(MIDR_VAR_SHIFT - MIDR_REV_BITS), #(MIDR_REV_BITS + MIDR_VAR_BITS)
bfxil x0, x1, #MIDR_REV_SHIFT, #MIDR_REV_BITS
ret
endfunc cpu_get_rev_var
/*
* Compare the CPU's revision-variant (x0) with a given value (x1), for errata
* application purposes. If the revision-variant is less than or same as a given
* value, indicates that errata applies; otherwise not.
*/
.globl cpu_rev_var_ls
func cpu_rev_var_ls
mov x2, #ERRATA_APPLIES
mov x3, #ERRATA_NOT_APPLIES
cmp x0, x1
csel x0, x2, x3, ls
ret
endfunc cpu_rev_var_ls
#if REPORT_ERRATA
/*
* void print_errata_status(void);
*
* Function to print errata status for CPUs of its class. Must be called only:
*
* - with MMU and data caches are enabled;
* - after cpu_ops have been initialized in per-CPU data.
*/
.globl print_errata_status
func print_errata_status
#ifdef IMAGE_BL1
/*
* BL1 doesn't have per-CPU data. So retrieve the CPU operations
* directly.
*/
stp xzr, x30, [sp, #-16]!
bl get_cpu_ops_ptr
ldp xzr, x30, [sp], #16
ldr x1, [x0, #CPU_ERRATA_FUNC]
cbnz x1, .Lprint
#else
/*
* Retrieve pointer to cpu_ops from per-CPU data, and further, the
* errata printing function. If it's non-NULL, jump to the function in
* turn.
*/
mrs x0, tpidr_el3
ldr x1, [x0, #CPU_DATA_CPU_OPS_PTR]
ldr x0, [x1, #CPU_ERRATA_FUNC]
cbz x0, .Lnoprint
/*
* Printing errata status requires atomically testing the printed flag.
*/
stp x8, x30, [sp, #-16]!
mov x8, x0
/*
* Load pointers to errata lock and printed flag. Call
* errata_needs_reporting to check whether this CPU needs to report
* errata status pertaining to its class.
*/
ldr x0, [x1, #CPU_ERRATA_LOCK]
ldr x1, [x1, #CPU_ERRATA_PRINTED]
bl errata_needs_reporting
mov x1, x8
ldp x8, x30, [sp], #16
cbnz x0, .Lprint
#endif
.Lnoprint:
ret
.Lprint:
/* Jump to errata reporting function for this CPU */
br x1
endfunc print_errata_status
#endif