blob: c13a5c9e0f2a6195aa56376c0ce402222d5ab232 [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __GICV3_H__
#define __GICV3_H__
/*******************************************************************************
* GICv3 miscellaneous definitions
******************************************************************************/
/* Interrupt group definitions */
#define INTR_GROUP1S 0
#define INTR_GROUP0 1
#define INTR_GROUP1NS 2
/* Interrupt IDs reported by the HPPIR and IAR registers */
#define PENDING_G1S_INTID 1020
#define PENDING_G1NS_INTID 1021
/* Constant to categorize LPI interrupt */
#define MIN_LPI_ID 8192
/* GICv3 can only target up to 16 PEs with SGI */
#define GICV3_MAX_SGI_TARGETS 16
/*******************************************************************************
* GICv3 specific Distributor interface register offsets and constants.
******************************************************************************/
#define GICD_STATUSR 0x10
#define GICD_SETSPI_NSR 0x40
#define GICD_CLRSPI_NSR 0x48
#define GICD_SETSPI_SR 0x50
#define GICD_CLRSPI_SR 0x50
#define GICD_IGRPMODR 0xd00
/*
* GICD_IROUTER<n> register is at 0x6000 + 8n, where n is the interrupt id and
* n >= 32, making the effective offset as 0x6100.
*/
#define GICD_IROUTER 0x6000
#define GICD_PIDR2_GICV3 0xffe8
#define IGRPMODR_SHIFT 5
/* GICD_CTLR bit definitions */
#define CTLR_ENABLE_G1NS_SHIFT 1
#define CTLR_ENABLE_G1S_SHIFT 2
#define CTLR_ARE_S_SHIFT 4
#define CTLR_ARE_NS_SHIFT 5
#define CTLR_DS_SHIFT 6
#define CTLR_E1NWF_SHIFT 7
#define GICD_CTLR_RWP_SHIFT 31
#define CTLR_ENABLE_G1NS_MASK 0x1
#define CTLR_ENABLE_G1S_MASK 0x1
#define CTLR_ARE_S_MASK 0x1
#define CTLR_ARE_NS_MASK 0x1
#define CTLR_DS_MASK 0x1
#define CTLR_E1NWF_MASK 0x1
#define GICD_CTLR_RWP_MASK 0x1
#define CTLR_ENABLE_G1NS_BIT (1 << CTLR_ENABLE_G1NS_SHIFT)
#define CTLR_ENABLE_G1S_BIT (1 << CTLR_ENABLE_G1S_SHIFT)
#define CTLR_ARE_S_BIT (1 << CTLR_ARE_S_SHIFT)
#define CTLR_ARE_NS_BIT (1 << CTLR_ARE_NS_SHIFT)
#define CTLR_DS_BIT (1 << CTLR_DS_SHIFT)
#define CTLR_E1NWF_BIT (1 << CTLR_E1NWF_SHIFT)
#define GICD_CTLR_RWP_BIT (1 << GICD_CTLR_RWP_SHIFT)
/* GICD_IROUTER shifts and masks */
#define IROUTER_SHIFT 0
#define IROUTER_IRM_SHIFT 31
#define IROUTER_IRM_MASK 0x1
#define GICV3_IRM_PE 0
#define GICV3_IRM_ANY 1
#define NUM_OF_DIST_REGS 30
/*******************************************************************************
* GICv3 Re-distributor interface registers & constants
******************************************************************************/
#define GICR_PCPUBASE_SHIFT 0x11
#define GICR_SGIBASE_OFFSET (1 << 0x10) /* 64 KB */
#define GICR_CTLR 0x0
#define GICR_TYPER 0x08
#define GICR_WAKER 0x14
#define GICR_PROPBASER 0x70
#define GICR_PENDBASER 0x78
#define GICR_IGROUPR0 (GICR_SGIBASE_OFFSET + 0x80)
#define GICR_ISENABLER0 (GICR_SGIBASE_OFFSET + 0x100)
#define GICR_ICENABLER0 (GICR_SGIBASE_OFFSET + 0x180)
#define GICR_ISPENDR0 (GICR_SGIBASE_OFFSET + 0x200)
#define GICR_ICPENDR0 (GICR_SGIBASE_OFFSET + 0x280)
#define GICR_ISACTIVER0 (GICR_SGIBASE_OFFSET + 0x300)
#define GICR_ICACTIVER0 (GICR_SGIBASE_OFFSET + 0x380)
#define GICR_IPRIORITYR (GICR_SGIBASE_OFFSET + 0x400)
#define GICR_ICFGR0 (GICR_SGIBASE_OFFSET + 0xc00)
#define GICR_ICFGR1 (GICR_SGIBASE_OFFSET + 0xc04)
#define GICR_IGRPMODR0 (GICR_SGIBASE_OFFSET + 0xd00)
#define GICR_NSACR (GICR_SGIBASE_OFFSET + 0xe00)
/* GICR_CTLR bit definitions */
#define GICR_CTLR_UWP_SHIFT 31
#define GICR_CTLR_UWP_MASK 0x1
#define GICR_CTLR_UWP_BIT (1U << GICR_CTLR_UWP_SHIFT)
#define GICR_CTLR_RWP_SHIFT 3
#define GICR_CTLR_RWP_MASK 0x1
#define GICR_CTLR_RWP_BIT (1U << GICR_CTLR_RWP_SHIFT)
#define GICR_CTLR_EN_LPIS_BIT (1U << 0)
/* GICR_WAKER bit definitions */
#define WAKER_CA_SHIFT 2
#define WAKER_PS_SHIFT 1
#define WAKER_CA_MASK 0x1
#define WAKER_PS_MASK 0x1
#define WAKER_CA_BIT (1 << WAKER_CA_SHIFT)
#define WAKER_PS_BIT (1 << WAKER_PS_SHIFT)
/* GICR_TYPER bit definitions */
#define TYPER_AFF_VAL_SHIFT 32
#define TYPER_PROC_NUM_SHIFT 8
#define TYPER_LAST_SHIFT 4
#define TYPER_AFF_VAL_MASK 0xffffffff
#define TYPER_PROC_NUM_MASK 0xffff
#define TYPER_LAST_MASK 0x1
#define TYPER_LAST_BIT (1 << TYPER_LAST_SHIFT)
#define NUM_OF_REDIST_REGS 30
/*******************************************************************************
* GICv3 CPU interface registers & constants
******************************************************************************/
/* ICC_SRE bit definitions*/
#define ICC_SRE_EN_BIT (1 << 3)
#define ICC_SRE_DIB_BIT (1 << 2)
#define ICC_SRE_DFB_BIT (1 << 1)
#define ICC_SRE_SRE_BIT (1 << 0)
/* ICC_IGRPEN1_EL3 bit definitions */
#define IGRPEN1_EL3_ENABLE_G1NS_SHIFT 0
#define IGRPEN1_EL3_ENABLE_G1S_SHIFT 1
#define IGRPEN1_EL3_ENABLE_G1NS_BIT (1 << IGRPEN1_EL3_ENABLE_G1NS_SHIFT)
#define IGRPEN1_EL3_ENABLE_G1S_BIT (1 << IGRPEN1_EL3_ENABLE_G1S_SHIFT)
/* ICC_IGRPEN0_EL1 bit definitions */
#define IGRPEN1_EL1_ENABLE_G0_SHIFT 0
#define IGRPEN1_EL1_ENABLE_G0_BIT (1 << IGRPEN1_EL1_ENABLE_G0_SHIFT)
/* ICC_HPPIR0_EL1 bit definitions */
#define HPPIR0_EL1_INTID_SHIFT 0
#define HPPIR0_EL1_INTID_MASK 0xffffff
/* ICC_HPPIR1_EL1 bit definitions */
#define HPPIR1_EL1_INTID_SHIFT 0
#define HPPIR1_EL1_INTID_MASK 0xffffff
/* ICC_IAR0_EL1 bit definitions */
#define IAR0_EL1_INTID_SHIFT 0
#define IAR0_EL1_INTID_MASK 0xffffff
/* ICC_IAR1_EL1 bit definitions */
#define IAR1_EL1_INTID_SHIFT 0
#define IAR1_EL1_INTID_MASK 0xffffff
/* ICC SGI macros */
#define SGIR_TGT_MASK 0xffff
#define SGIR_AFF1_SHIFT 16
#define SGIR_INTID_SHIFT 24
#define SGIR_INTID_MASK 0xf
#define SGIR_AFF2_SHIFT 32
#define SGIR_IRM_SHIFT 40
#define SGIR_IRM_MASK 0x1
#define SGIR_AFF3_SHIFT 48
#define SGIR_AFF_MASK 0xf
#define SGIR_IRM_TO_AFF 0
#define GICV3_SGIR_VALUE(aff3, aff2, aff1, intid, irm, tgt) \
((((uint64_t) (aff3) & SGIR_AFF_MASK) << SGIR_AFF3_SHIFT) | \
(((uint64_t) (irm) & SGIR_IRM_MASK) << SGIR_IRM_SHIFT) | \
(((uint64_t) (aff2) & SGIR_AFF_MASK) << SGIR_AFF2_SHIFT) | \
(((intid) & SGIR_INTID_MASK) << SGIR_INTID_SHIFT) | \
(((aff1) & SGIR_AFF_MASK) << SGIR_AFF1_SHIFT) | \
((tgt) & SGIR_TGT_MASK))
/*****************************************************************************
* GICv3 ITS registers and constants
*****************************************************************************/
#define GITS_CTLR 0x0
#define GITS_IIDR 0x4
#define GITS_TYPER 0x8
#define GITS_CBASER 0x80
#define GITS_CWRITER 0x88
#define GITS_CREADR 0x90
#define GITS_BASER 0x100
/* GITS_CTLR bit definitions */
#define GITS_CTLR_ENABLED_BIT 1
#define GITS_CTLR_QUIESCENT_SHIFT 31
#define GITS_CTLR_QUIESCENT_BIT (1U << GITS_CTLR_QUIESCENT_SHIFT)
#ifndef __ASSEMBLY__
#include <gic_common.h>
#include <interrupt_props.h>
#include <stdint.h>
#include <utils_def.h>
#define gicv3_is_intr_id_special_identifier(id) \
(((id) >= PENDING_G1S_INTID) && ((id) <= GIC_SPURIOUS_INTERRUPT))
/*******************************************************************************
* Helper GICv3 macros for SEL1
******************************************************************************/
#define gicv3_acknowledge_interrupt_sel1() read_icc_iar1_el1() &\
IAR1_EL1_INTID_MASK
#define gicv3_get_pending_interrupt_id_sel1() read_icc_hppir1_el1() &\
HPPIR1_EL1_INTID_MASK
#define gicv3_end_of_interrupt_sel1(id) write_icc_eoir1_el1(id)
/*******************************************************************************
* Helper GICv3 macros for EL3
******************************************************************************/
#define gicv3_acknowledge_interrupt() read_icc_iar0_el1() &\
IAR0_EL1_INTID_MASK
#define gicv3_end_of_interrupt(id) write_icc_eoir0_el1(id)
/*
* This macro returns the total number of GICD registers corresponding to
* the name.
*/
#define GICD_NUM_REGS(reg_name) \
DIV_ROUND_UP_2EVAL(TOTAL_SPI_INTR_NUM, (1 << reg_name ## _SHIFT))
#define GICR_NUM_REGS(reg_name) \
DIV_ROUND_UP_2EVAL(TOTAL_PCPU_INTR_NUM, (1 << reg_name ## _SHIFT))
/* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
#define INT_ID_MASK 0xffffff
/*******************************************************************************
* This structure describes some of the implementation defined attributes of the
* GICv3 IP. It is used by the platform port to specify these attributes in order
* to initialise the GICV3 driver. The attributes are described below.
*
* The 'gicd_base' field contains the base address of the Distributor interface
* programmer's view.
*
* The 'gicr_base' field contains the base address of the Re-distributor
* interface programmer's view.
*
* The 'g0_interrupt_array' field is a pointer to an array in which each entry
* corresponds to an ID of a Group 0 interrupt. This field is ignored when
* 'interrupt_props' field is used. This field is deprecated.
*
* The 'g0_interrupt_num' field contains the number of entries in the
* 'g0_interrupt_array'. This field is ignored when 'interrupt_props' field is
* used. This field is deprecated.
*
* The 'g1s_interrupt_array' field is a pointer to an array in which each entry
* corresponds to an ID of a Group 1 interrupt. This field is ignored when
* 'interrupt_props' field is used. This field is deprecated.
*
* The 'g1s_interrupt_num' field contains the number of entries in the
* 'g1s_interrupt_array'. This field must be 0 if 'interrupt_props' field is
* used. This field is ignored when 'interrupt_props' field is used. This field
* is deprecated.
*
* The 'interrupt_props' field is a pointer to an array that enumerates secure
* interrupts and their properties. If this field is not NULL, both
* 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
*
* The 'interrupt_props_num' field contains the number of entries in the
* 'interrupt_props' array. If this field is non-zero, both 'g0_interrupt_num'
* and 'g1s_interrupt_num' are ignored.
*
* The 'rdistif_num' field contains the number of Redistributor interfaces the
* GIC implements. This is equal to the number of CPUs or CPU interfaces
* instantiated in the GIC.
*
* The 'rdistif_base_addrs' field is a pointer to an array that has an entry for
* storing the base address of the Redistributor interface frame of each CPU in
* the system. The size of the array = 'rdistif_num'. The base addresses are
* detected during driver initialisation.
*
* The 'mpidr_to_core_pos' field is a pointer to a hash function which the
* driver will use to convert an MPIDR value to a linear core index. This index
* will be used for accessing the 'rdistif_base_addrs' array. This is an
* optional field. A GICv3 implementation maps each MPIDR to a linear core index
* as well. This mapping can be found by reading the "Affinity Value" and
* "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the
* "Processor Numbers" are suitable to index into an array to access core
* specific information. If this not the case, the platform port must provide a
* hash function. Otherwise, the "Processor Number" field will be used to access
* the array elements.
******************************************************************************/
typedef unsigned int (*mpidr_hash_fn)(u_register_t mpidr);
typedef struct gicv3_driver_data {
uintptr_t gicd_base;
uintptr_t gicr_base;
#if !ERROR_DEPRECATED
unsigned int g0_interrupt_num __deprecated;
unsigned int g1s_interrupt_num __deprecated;
const unsigned int *g0_interrupt_array __deprecated;
const unsigned int *g1s_interrupt_array __deprecated;
#endif
const interrupt_prop_t *interrupt_props;
unsigned int interrupt_props_num;
unsigned int rdistif_num;
uintptr_t *rdistif_base_addrs;
mpidr_hash_fn mpidr_to_core_pos;
} gicv3_driver_data_t;
typedef struct gicv3_redist_ctx {
/* 64 bits registers */
uint64_t gicr_propbaser;
uint64_t gicr_pendbaser;
/* 32 bits registers */
uint32_t gicr_ctlr;
uint32_t gicr_igroupr0;
uint32_t gicr_isenabler0;
uint32_t gicr_ispendr0;
uint32_t gicr_isactiver0;
uint32_t gicr_ipriorityr[GICR_NUM_REGS(IPRIORITYR)];
uint32_t gicr_icfgr0;
uint32_t gicr_icfgr1;
uint32_t gicr_igrpmodr0;
uint32_t gicr_nsacr;
} gicv3_redist_ctx_t;
typedef struct gicv3_dist_ctx {
/* 64 bits registers */
uint64_t gicd_irouter[TOTAL_SPI_INTR_NUM];
/* 32 bits registers */
uint32_t gicd_ctlr;
uint32_t gicd_igroupr[GICD_NUM_REGS(IGROUPR)];
uint32_t gicd_isenabler[GICD_NUM_REGS(ISENABLER)];
uint32_t gicd_ispendr[GICD_NUM_REGS(ISPENDR)];
uint32_t gicd_isactiver[GICD_NUM_REGS(ISACTIVER)];
uint32_t gicd_ipriorityr[GICD_NUM_REGS(IPRIORITYR)];
uint32_t gicd_icfgr[GICD_NUM_REGS(ICFGR)];
uint32_t gicd_igrpmodr[GICD_NUM_REGS(IGRPMODR)];
uint32_t gicd_nsacr[GICD_NUM_REGS(NSACR)];
} gicv3_dist_ctx_t;
typedef struct gicv3_its_ctx {
/* 64 bits registers */
uint64_t gits_cbaser;
uint64_t gits_cwriter;
uint64_t gits_baser[8];
/* 32 bits registers */
uint32_t gits_ctlr;
} gicv3_its_ctx_t;
/*******************************************************************************
* GICv3 EL3 driver API
******************************************************************************/
void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
void gicv3_distif_init(void);
void gicv3_rdistif_init(unsigned int proc_num);
void gicv3_rdistif_on(unsigned int proc_num);
void gicv3_rdistif_off(unsigned int proc_num);
void gicv3_cpuif_enable(unsigned int proc_num);
void gicv3_cpuif_disable(unsigned int proc_num);
unsigned int gicv3_get_pending_interrupt_type(void);
unsigned int gicv3_get_pending_interrupt_id(void);
unsigned int gicv3_get_interrupt_type(unsigned int id,
unsigned int proc_num);
void gicv3_distif_init_restore(const gicv3_dist_ctx_t * const dist_ctx);
void gicv3_distif_save(gicv3_dist_ctx_t * const dist_ctx);
/*
* gicv3_distif_post_restore and gicv3_distif_pre_save must be implemented if
* gicv3_distif_save and gicv3_rdistif_init_restore are used. If no
* implementation-defined sequence is needed at these steps, an empty function
* can be provided.
*/
void gicv3_distif_post_restore(unsigned int proc_num);
void gicv3_distif_pre_save(unsigned int proc_num);
void gicv3_rdistif_init_restore(unsigned int proc_num, const gicv3_redist_ctx_t * const rdist_ctx);
void gicv3_rdistif_save(unsigned int proc_num, gicv3_redist_ctx_t * const rdist_ctx);
void gicv3_its_save_disable(uintptr_t gits_base, gicv3_its_ctx_t * const its_ctx);
void gicv3_its_restore(uintptr_t gits_base, const gicv3_its_ctx_t * const its_ctx);
unsigned int gicv3_get_running_priority(void);
unsigned int gicv3_get_interrupt_active(unsigned int id, unsigned int proc_num);
void gicv3_enable_interrupt(unsigned int id, unsigned int proc_num);
void gicv3_disable_interrupt(unsigned int id, unsigned int proc_num);
void gicv3_set_interrupt_priority(unsigned int id, unsigned int proc_num,
unsigned int priority);
void gicv3_set_interrupt_type(unsigned int id, unsigned int proc_num,
unsigned int type);
void gicv3_raise_secure_g0_sgi(int sgi_num, u_register_t target);
void gicv3_set_spi_routing(unsigned int id, unsigned int irm,
u_register_t mpidr);
void gicv3_set_interrupt_pending(unsigned int id, unsigned int proc_num);
void gicv3_clear_interrupt_pending(unsigned int id, unsigned int proc_num);
unsigned int gicv3_set_pmr(unsigned int mask);
#endif /* __ASSEMBLY__ */
#endif /* __GICV3_H__ */