blob: bccd2a7d22a84d0750e2fa5920332915278833e9 [file] [log] [blame]
/*
* Copyright (c) 2016-2023, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef ASM_MACROS_S
#define ASM_MACROS_S
#include <arch.h>
#include <common/asm_macros_common.S>
#include <lib/cpus/cpu_ops.h>
#include <lib/spinlock.h>
/*
* TLBI instruction with type specifier that implements the workaround for
* errata 813419 of Cortex-A57.
*/
#if ERRATA_A57_813419
#define TLB_INVALIDATE(_reg, _coproc) \
stcopr _reg, _coproc; \
dsb ish; \
stcopr _reg, _coproc
#else
#define TLB_INVALIDATE(_reg, _coproc) \
stcopr _reg, _coproc
#endif
/*
* Co processor register accessors
*/
.macro ldcopr reg, coproc, opc1, CRn, CRm, opc2
mrc \coproc, \opc1, \reg, \CRn, \CRm, \opc2
.endm
.macro ldcopr16 reg1, reg2, coproc, opc1, CRm
mrrc \coproc, \opc1, \reg1, \reg2, \CRm
.endm
.macro stcopr reg, coproc, opc1, CRn, CRm, opc2
mcr \coproc, \opc1, \reg, \CRn, \CRm, \opc2
.endm
.macro stcopr16 reg1, reg2, coproc, opc1, CRm
mcrr \coproc, \opc1, \reg1, \reg2, \CRm
.endm
/* Cache line size helpers */
.macro dcache_line_size reg, tmp
ldcopr \tmp, CTR
ubfx \tmp, \tmp, #CTR_DMINLINE_SHIFT, #CTR_DMINLINE_WIDTH
mov \reg, #CPU_WORD_SIZE
lsl \reg, \reg, \tmp
.endm
.macro icache_line_size reg, tmp
ldcopr \tmp, CTR
and \tmp, \tmp, #CTR_IMINLINE_MASK
mov \reg, #CPU_WORD_SIZE
lsl \reg, \reg, \tmp
.endm
/*
* Declare the exception vector table, enforcing it is aligned on a
* 32 byte boundary.
*/
.macro vector_base label
.section .vectors, "ax"
.align 5
\label:
.endm
/*
* This macro calculates the base address of the current CPU's multi
* processor(MP) stack using the plat_my_core_pos() index, the name of
* the stack storage and the size of each stack.
* Out: r0 = physical address of stack base
* Clobber: r14, r1, r2
*/
.macro get_my_mp_stack _name, _size
bl plat_my_core_pos
ldr r2, =(\_name + \_size)
mov r1, #\_size
mla r0, r0, r1, r2
.endm
/*
* This macro calculates the base address of a uniprocessor(UP) stack
* using the name of the stack storage and the size of the stack
* Out: r0 = physical address of stack base
*/
.macro get_up_stack _name, _size
ldr r0, =(\_name + \_size)
.endm
#if ARM_ARCH_MAJOR == 7 && !defined(ARMV7_SUPPORTS_VIRTUALIZATION)
/*
* Macro for mitigating against speculative execution.
* ARMv7 cores without Virtualization extension do not support the
* eret instruction.
*/
.macro exception_return
movs pc, lr
dsb nsh
isb
.endm
#else
/*
* Macro for mitigating against speculative execution beyond ERET. Uses the
* speculation barrier instruction introduced by FEAT_SB, if it's enabled.
*/
.macro exception_return
eret
#if ENABLE_FEAT_SB
sb
#else
dsb nsh
isb
#endif
.endm
#endif
/* Macro for error synchronization */
.macro synchronize_errors
/* Complete any stores that may return an abort */
dsb sy
/* Synchronise the CPU context with the completion of the dsb */
isb
.endm
#if (ARM_ARCH_MAJOR == 7)
/* ARMv7 does not support stl instruction */
.macro stl _reg, _write_lock
dmb
str \_reg, \_write_lock
dsb
.endm
#endif
/*
* Helper macro to generate the best mov/movw/movt combinations
* according to the value to be moved.
*/
.macro mov_imm _reg, _val
.if ((\_val) & 0xffff0000) == 0
mov \_reg, #(\_val)
.else
movw \_reg, #((\_val) & 0xffff)
movt \_reg, #((\_val) >> 16)
.endif
.endm
/*
* Macro to mark instances where we're jumping to a function and don't
* expect a return. To provide the function being jumped to with
* additional information, we use 'bl' instruction to jump rather than
* 'b'.
*
* Debuggers infer the location of a call from where LR points to, which
* is usually the instruction after 'bl'. If this macro expansion
* happens to be the last location in a function, that'll cause the LR
* to point a location beyond the function, thereby misleading debugger
* back trace. We therefore insert a 'nop' after the function call for
* debug builds, unless 'skip_nop' parameter is non-zero.
*/
.macro no_ret _func:req, skip_nop=0
bl \_func
#if DEBUG
.ifeq \skip_nop
nop
.endif
#endif
.endm
/*
* Reserve space for a spin lock in assembly file.
*/
.macro define_asm_spinlock _name:req
.align SPINLOCK_ASM_ALIGN
\_name:
.space SPINLOCK_ASM_SIZE
.endm
/*
* Helper macro to OR the bottom 32 bits of `_val` into `_reg_l`
* and the top 32 bits of `_val` into `_reg_h`. If either the bottom
* or top word of `_val` is zero, the corresponding OR operation
* is skipped.
*/
.macro orr64_imm _reg_l, _reg_h, _val
.if (\_val >> 32)
orr \_reg_h, \_reg_h, #(\_val >> 32)
.endif
.if (\_val & 0xffffffff)
orr \_reg_l, \_reg_l, #(\_val & 0xffffffff)
.endif
.endm
/*
* Helper macro to bitwise-clear bits in `_reg_l` and
* `_reg_h` given a 64 bit immediate `_val`. The set bits
* in the bottom word of `_val` dictate which bits from
* `_reg_l` should be cleared. Similarly, the set bits in
* the top word of `_val` dictate which bits from `_reg_h`
* should be cleared. If either the bottom or top word of
* `_val` is zero, the corresponding BIC operation is skipped.
*/
.macro bic64_imm _reg_l, _reg_h, _val
.if (\_val >> 32)
bic \_reg_h, \_reg_h, #(\_val >> 32)
.endif
.if (\_val & 0xffffffff)
bic \_reg_l, \_reg_l, #(\_val & 0xffffffff)
.endif
.endm
/*
* Helper macro for carrying out division in software when
* hardware division is not suported. \top holds the dividend
* in the function call and the remainder after
* the function is executed. \bot holds the divisor. \div holds
* the quotient and \temp is a temporary registed used in calcualtion.
* The division algorithm has been obtained from:
* http://www.keil.com/support/man/docs/armasm/armasm_dom1359731155623.htm
*/
.macro softudiv div:req,top:req,bot:req,temp:req
mov \temp, \bot
cmp \temp, \top, lsr #1
div1:
movls \temp, \temp, lsl #1
cmp \temp, \top, lsr #1
bls div1
mov \div, #0
div2:
cmp \top, \temp
subcs \top, \top,\temp
ADC \div, \div, \div
mov \temp, \temp, lsr #1
cmp \temp, \bot
bhs div2
.endm
/*
* Helper macro to instruction adr <reg>, <symbol> where <symbol> is
* within the range +/- 4 GB.
*/
.macro adr_l, dst, sym
adrp \dst, \sym
add \dst, \dst, :lo12:\sym
.endm
#endif /* ASM_MACROS_S */