blob: c0cf5e2a87321bf74ec9fd9dd6f548d65ea0ee64 [file] [log] [blame]
/*
* Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <debug.h>
#include <k3_console.h>
#include <k3_gicv3.h>
#include <platform_def.h>
#include <string.h>
#include <ti_sci.h>
#include <xlat_tables_v2.h>
/* Table of regions to map using the MMU */
const mmap_region_t plat_k3_mmap[] = {
MAP_REGION_FLAT(SHARED_RAM_BASE, SHARED_RAM_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(K3_USART_BASE_ADDRESS, K3_USART_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(K3_GICD_BASE, K3_GICD_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(K3_GICR_BASE, K3_GICR_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(SEC_PROXY_RT_BASE, SEC_PROXY_RT_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(SEC_PROXY_SCFG_BASE, SEC_PROXY_SCFG_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(SEC_PROXY_DATA_BASE, SEC_PROXY_DATA_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
{ /* sentinel */ }
};
/*
* Placeholder variables for maintaining information about the next image(s)
*/
static entry_point_info_t bl32_image_ep_info;
static entry_point_info_t bl33_image_ep_info;
/*******************************************************************************
* Gets SPSR for BL33 entry
******************************************************************************/
static uint32_t k3_get_spsr_for_bl33_entry(void)
{
unsigned long el_status;
unsigned int mode;
uint32_t spsr;
/* Figure out what mode we enter the non-secure world in */
el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
el_status &= ID_AA64PFR0_ELX_MASK;
mode = (el_status) ? MODE_EL2 : MODE_EL1;
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
/*******************************************************************************
* Perform any BL3-1 early platform setup, such as console init and deciding on
* memory layout.
******************************************************************************/
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
/* There are no parameters from BL2 if BL31 is a reset vector */
assert(arg0 == 0U);
assert(arg1 == 0U);
bl31_console_setup();
#ifdef BL32_BASE
/* Populate entry point information for BL32 */
SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
bl32_image_ep_info.pc = BL32_BASE;
bl32_image_ep_info.spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
DISABLE_ALL_EXCEPTIONS);
SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
#endif
/* Populate entry point information for BL33 */
SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0);
bl33_image_ep_info.pc = PRELOADED_BL33_BASE;
bl33_image_ep_info.spsr = k3_get_spsr_for_bl33_entry();
SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
#ifdef K3_HW_CONFIG_BASE
/*
* According to the file ``Documentation/arm64/booting.txt`` of the
* Linux kernel tree, Linux expects the physical address of the device
* tree blob (DTB) in x0, while x1-x3 are reserved for future use and
* must be 0.
*/
bl33_image_ep_info.args.arg0 = (u_register_t)K3_HW_CONFIG_BASE;
bl33_image_ep_info.args.arg1 = 0U;
bl33_image_ep_info.args.arg2 = 0U;
bl33_image_ep_info.args.arg3 = 0U;
#endif
}
void bl31_plat_arch_setup(void)
{
const mmap_region_t bl_regions[] = {
MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
MT_MEMORY | MT_RW | MT_SECURE),
MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
MT_CODE | MT_SECURE),
MAP_REGION_FLAT(BL_RO_DATA_BASE, BL_RO_DATA_END - BL_RO_DATA_END,
MT_RO_DATA | MT_SECURE),
{0}
};
setup_page_tables(bl_regions, plat_k3_mmap);
enable_mmu_el3(0);
}
void bl31_platform_setup(void)
{
k3_gic_driver_init(K3_GICD_BASE, K3_GICR_BASE);
k3_gic_init();
ti_sci_init();
}
void platform_mem_init(void)
{
/* Do nothing for now... */
}
unsigned int plat_get_syscnt_freq2(void)
{
return SYS_COUNTER_FREQ_IN_TICKS;
}
/*
* Empty function to prevent the console from being uninitialized after BL33 is
* started and allow us to see messages from BL31.
*/
void bl31_plat_runtime_setup(void)
{
}
/*******************************************************************************
* Return a pointer to the 'entry_point_info' structure of the next image
* for the security state specified. BL3-3 corresponds to the non-secure
* image type while BL3-2 corresponds to the secure image type. A NULL
* pointer is returned if the image does not exist.
******************************************************************************/
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
entry_point_info_t *next_image_info;
assert(sec_state_is_valid(type));
next_image_info = (type == NON_SECURE) ? &bl33_image_ep_info :
&bl32_image_ep_info;
/*
* None of the images on the ARM development platforms can have 0x0
* as the entrypoint
*/
if (next_image_info->pc)
return next_image_info;
NOTICE("Requested nonexistent image\n");
return NULL;
}