blob: 59dcc90be43011e75a9369adfe7360be968360a9 [file] [log] [blame]
/*
* Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __FVP_DEF_H__
#define __FVP_DEF_H__
#include <platform_def.h> /* for TZROM_SIZE */
/* Firmware Image Package */
#define FIP_IMAGE_NAME "fip.bin"
/* Constants for accessing platform configuration */
#define CONFIG_GICD_ADDR 0
#define CONFIG_GICC_ADDR 1
#define CONFIG_GICH_ADDR 2
#define CONFIG_GICV_ADDR 3
#define CONFIG_MAX_AFF0 4
#define CONFIG_MAX_AFF1 5
/* Indicate whether the CPUECTLR SMP bit should be enabled. */
#define CONFIG_CPU_SETUP 6
#define CONFIG_BASE_MMAP 7
/* Indicates whether CCI should be enabled on the platform. */
#define CONFIG_HAS_CCI 8
#define CONFIG_HAS_TZC 9
#define CONFIG_LIMIT 10
/*******************************************************************************
* FVP memory map related constants
******************************************************************************/
#define FLASH0_BASE 0x08000000
#define FLASH0_SIZE TZROM_SIZE
#define FLASH1_BASE 0x0c000000
#define FLASH1_SIZE 0x04000000
#define PSRAM_BASE 0x14000000
#define PSRAM_SIZE 0x04000000
#define VRAM_BASE 0x18000000
#define VRAM_SIZE 0x02000000
/* Aggregate of all devices in the first GB */
#define DEVICE0_BASE 0x1a000000
#define DEVICE0_SIZE 0x12200000
#define DEVICE1_BASE 0x2f000000
#define DEVICE1_SIZE 0x200000
#define NSRAM_BASE 0x2e000000
#define NSRAM_SIZE 0x10000
#define MBOX_OFF 0x1000
/* Base address where parameters to BL31 are stored */
#define PARAMS_BASE TZDRAM_BASE
#define DRAM1_BASE 0x80000000ull
#define DRAM1_SIZE 0x80000000ull
#define DRAM1_END (DRAM1_BASE + DRAM1_SIZE - 1)
#define DRAM1_SEC_SIZE 0x01000000ull
#define DRAM_BASE DRAM1_BASE
#define DRAM_SIZE DRAM1_SIZE
#define DRAM2_BASE 0x880000000ull
#define DRAM2_SIZE 0x780000000ull
#define DRAM2_END (DRAM2_BASE + DRAM2_SIZE - 1)
#define PCIE_EXP_BASE 0x40000000
#define TZRNG_BASE 0x7fe60000
#define TZNVCTR_BASE 0x7fe70000
#define TZROOTKEY_BASE 0x7fe80000
/* Memory mapped Generic timer interfaces */
#define SYS_CNTCTL_BASE 0x2a430000
#define SYS_CNTREAD_BASE 0x2a800000
#define SYS_TIMCTL_BASE 0x2a810000
/* V2M motherboard system registers & offsets */
#define VE_SYSREGS_BASE 0x1c010000
#define V2M_SYS_ID 0x0
#define V2M_SYS_LED 0x8
#define V2M_SYS_CFGDATA 0xa0
#define V2M_SYS_CFGCTRL 0xa4
/* Load address of BL33 in the FVP port */
#define NS_IMAGE_OFFSET (DRAM1_BASE + 0x8000000) /* DRAM + 128MB */
/* Special value used to verify platform parameters from BL2 to BL3-1 */
#define FVP_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
/*
* V2M sysled bit definitions. The values written to this
* register are defined in arch.h & runtime_svc.h. Only
* used by the primary cpu to diagnose any cold boot issues.
*
* SYS_LED[0] - Security state (S=0/NS=1)
* SYS_LED[2:1] - Exception Level (EL3-EL0)
* SYS_LED[7:3] - Exception Class (Sync/Async & origin)
*
*/
#define SYS_LED_SS_SHIFT 0x0
#define SYS_LED_EL_SHIFT 0x1
#define SYS_LED_EC_SHIFT 0x3
#define SYS_LED_SS_MASK 0x1
#define SYS_LED_EL_MASK 0x3
#define SYS_LED_EC_MASK 0x1f
/* V2M sysid register bits */
#define SYS_ID_REV_SHIFT 28
#define SYS_ID_HBI_SHIFT 16
#define SYS_ID_BLD_SHIFT 12
#define SYS_ID_ARCH_SHIFT 8
#define SYS_ID_FPGA_SHIFT 0
#define SYS_ID_REV_MASK 0xf
#define SYS_ID_HBI_MASK 0xfff
#define SYS_ID_BLD_MASK 0xf
#define SYS_ID_ARCH_MASK 0xf
#define SYS_ID_FPGA_MASK 0xff
#define SYS_ID_BLD_LENGTH 4
#define REV_FVP 0x0
#define HBI_FVP_BASE 0x020
#define HBI_FOUNDATION 0x010
#define BLD_GIC_VE_MMAP 0x0
#define BLD_GIC_A53A57_MMAP 0x1
#define ARCH_MODEL 0x1
/* FVP Power controller base address*/
#define PWRC_BASE 0x1c100000
/*******************************************************************************
* CCI-400 related constants
******************************************************************************/
#define CCI400_BASE 0x2c090000
#define CCI400_SL_IFACE_CLUSTER0 3
#define CCI400_SL_IFACE_CLUSTER1 4
#define CCI400_SL_IFACE_INDEX(mpidr) (mpidr & MPIDR_CLUSTER_MASK ? \
CCI400_SL_IFACE_CLUSTER1 : \
CCI400_SL_IFACE_CLUSTER0)
/*******************************************************************************
* GIC-400 & interrupt handling related constants
******************************************************************************/
/* VE compatible GIC memory map */
#define VE_GICD_BASE 0x2c001000
#define VE_GICC_BASE 0x2c002000
#define VE_GICH_BASE 0x2c004000
#define VE_GICV_BASE 0x2c006000
/* Base FVP compatible GIC memory map */
#define BASE_GICD_BASE 0x2f000000
#define BASE_GICR_BASE 0x2f100000
#define BASE_GICC_BASE 0x2c000000
#define BASE_GICH_BASE 0x2c010000
#define BASE_GICV_BASE 0x2c02f000
#define IRQ_TZ_WDOG 56
#define IRQ_SEC_PHY_TIMER 29
#define IRQ_SEC_SGI_0 8
#define IRQ_SEC_SGI_1 9
#define IRQ_SEC_SGI_2 10
#define IRQ_SEC_SGI_3 11
#define IRQ_SEC_SGI_4 12
#define IRQ_SEC_SGI_5 13
#define IRQ_SEC_SGI_6 14
#define IRQ_SEC_SGI_7 15
#define IRQ_SEC_SGI_8 16
/*******************************************************************************
* PL011 related constants
******************************************************************************/
#define PL011_UART0_BASE 0x1c090000
#define PL011_UART1_BASE 0x1c0a0000
#define PL011_UART2_BASE 0x1c0b0000
#define PL011_UART3_BASE 0x1c0c0000
/*******************************************************************************
* TrustZone address space controller related constants
******************************************************************************/
#define TZC400_BASE 0x2a4a0000
/*
* The NSAIDs for this platform as used to program the TZC400.
*/
/* The FVP has 4 bits of NSAIDs. Used with TZC FAIL_ID (ACE Lite ID width) */
#define FVP_AID_WIDTH 4
/* NSAIDs used by devices in TZC filter 0 on FVP */
#define FVP_NSAID_DEFAULT 0
#define FVP_NSAID_PCI 1
#define FVP_NSAID_VIRTIO 8 /* from FVP v5.6 onwards */
#define FVP_NSAID_AP 9 /* Application Processors */
#define FVP_NSAID_VIRTIO_OLD 15 /* until FVP v5.5 */
/* NSAIDs used by devices in TZC filter 2 on FVP */
#define FVP_NSAID_HDLCD0 2
#define FVP_NSAID_CLCD 7
#endif /* __FVP_DEF_H__ */