plat/xilinx/common/include/pm_defs.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2019-2022, Xilinx, Inc. All rights reserved.
  * Copyright (c) 2022-2024, Advanced Micro Devices, Inc. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 /* Versal power management enums and defines */

 #ifndef PM_DEFS_H
 #define PM_DEFS_H

 #include "pm_node.h"

 /*********************************************************************
  * Macro definitions
  ********************************************************************/

 /* State arguments of the self suspend */
 #define PM_STATE_CPU_IDLE	0x0U
 #define PM_STATE_CPU_OFF	0x1U
 #define PM_STATE_SUSPEND_TO_RAM	0xFU

 #define MAX_LATENCY		(~0U)
 #define MAX_QOS			100U

 /* Processor core device IDs */
 #define APU_DEVID(IDX)	NODEID(XPM_NODECLASS_DEVICE, XPM_NODESUBCL_DEV_CORE, \
 			       XPM_NODETYPE_DEV_CORE_APU, (IDX))

 #define XPM_DEVID_ACPU_0	APU_DEVID(XPM_NODEIDX_DEV_ACPU_0)
 #define XPM_DEVID_ACPU_1	APU_DEVID(XPM_NODEIDX_DEV_ACPU_1)

 #define PERIPH_DEVID(IDX)	NODEID((uint32_t)XPM_NODECLASS_DEVICE, \
 				       (uint32_t)XPM_NODESUBCL_DEV_PERIPH, \
 				       (uint32_t)XPM_NODETYPE_DEV_PERIPH, (IDX))

 #define PM_GET_CALLBACK_DATA		0xa01U
 #define PM_GET_TRUSTZONE_VERSION	0xa03U
 #define TF_A_PM_REGISTER_SGI		0xa04U

 /* PM API Versions */
 #define PM_API_BASE_VERSION		1U
 #define PM_API_VERSION_2		2U

 /* Loader API ids */
 #define PM_LOAD_PDI			0x701U
 #define PM_LOAD_GET_HANDOFF_PARAMS	0x70BU

 /* System shutdown macros */
 #define	XPM_SHUTDOWN_TYPE_SHUTDOWN	0U
 #define	XPM_SHUTDOWN_TYPE_RESET		1U
 #define	XPM_SHUTDOWN_TYPE_SETSCOPE_ONLY	2U

 #define	XPM_SHUTDOWN_SUBTYPE_RST_SUBSYSTEM	0U
 #define	XPM_SHUTDOWN_SUBTYPE_RST_PS_ONLY	1U
 #define	XPM_SHUTDOWN_SUBTYPE_RST_SYSTEM		2U

 /*********************************************************************
  * Enum definitions
  ********************************************************************/

 /*
  * ioctl id
  */
 enum {
 	IOCTL_GET_RPU_OPER_MODE = 0,
 	IOCTL_SET_RPU_OPER_MODE = 1,
 	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
 	IOCTL_TCM_COMB_CONFIG = 3,
 	IOCTL_SET_TAPDELAY_BYPASS = 4,
 	IOCTL_SD_DLL_RESET = 6,
 	IOCTL_SET_SD_TAPDELAY = 7,
 	 /* Ioctl for clock driver */
 	IOCTL_SET_PLL_FRAC_MODE = 8,
 	IOCTL_GET_PLL_FRAC_MODE = 9,
 	IOCTL_SET_PLL_FRAC_DATA = 10,
 	IOCTL_GET_PLL_FRAC_DATA = 11,
 	IOCTL_WRITE_GGS = 12,
 	IOCTL_READ_GGS = 13,
 	IOCTL_WRITE_PGGS = 14,
 	IOCTL_READ_PGGS = 15,
 	/* IOCTL for ULPI reset */
 	IOCTL_ULPI_RESET = 16,
 	/* Set healthy bit value */
 	IOCTL_SET_BOOT_HEALTH_STATUS = 17,
 	IOCTL_AFI = 18,
 	/* Probe counter read/write */
 	IOCTL_PROBE_COUNTER_READ = 19,
 	IOCTL_PROBE_COUNTER_WRITE = 20,
 	IOCTL_OSPI_MUX_SELECT = 21,
 	/* IOCTL for USB power request */
 	IOCTL_USB_SET_STATE = 22,
 	/* IOCTL to get last reset reason */
 	IOCTL_GET_LAST_RESET_REASON = 23,
 	/* AI engine NPI ISR clear */
 	IOCTL_AIE_ISR_CLEAR = 24,
 };

 /**
  * enum pm_pll_param - enum represents the parameters for a phase-locked loop.
  * @PM_PLL_PARAM_DIV2: Enable for divide by 2 function inside the PLL.
  * @PM_PLL_PARAM_FBDIV: Feedback divisor integer portion for the PLL.
  * @PM_PLL_PARAM_DATA: Feedback divisor fractional portion for the PLL.
  * @PM_PLL_PARAM_PRE_SRC: Clock source for PLL input.
  * @PM_PLL_PARAM_POST_SRC: Clock source for PLL Bypass mode.
  * @PM_PLL_PARAM_LOCK_DLY: Lock circuit config settings for lock windowsize.
  * @PM_PLL_PARAM_LOCK_CNT: Lock circuit counter setting.
  * @PM_PLL_PARAM_LFHF: PLL loop filter high frequency capacitor control.
  * @PM_PLL_PARAM_CP: PLL charge pump control.
  * @PM_PLL_PARAM_RES: PLL loop filter resistor control.
  * @PM_PLL_PARAM_MAX: Represents the maximum parameter value for the PLL
  */
 enum pm_pll_param {
 	PM_PLL_PARAM_DIV2,
 	PM_PLL_PARAM_FBDIV,
 	PM_PLL_PARAM_DATA,
 	PM_PLL_PARAM_PRE_SRC,
 	PM_PLL_PARAM_POST_SRC,
 	PM_PLL_PARAM_LOCK_DLY,
 	PM_PLL_PARAM_LOCK_CNT,
 	PM_PLL_PARAM_LFHF,
 	PM_PLL_PARAM_CP,
 	PM_PLL_PARAM_RES,
 	PM_PLL_PARAM_MAX,
 };

 enum pm_api_id {
 	/* Miscellaneous API functions: */
 	PM_GET_API_VERSION = 1, /* Do not change or move */
 	PM_SET_CONFIGURATION,
 	PM_GET_NODE_STATUS,
 	PM_GET_OP_CHARACTERISTIC,
 	PM_REGISTER_NOTIFIER,
 	/* API for suspending of PUs: */
 	PM_REQ_SUSPEND,
 	PM_SELF_SUSPEND,
 	PM_FORCE_POWERDOWN,
 	PM_ABORT_SUSPEND,
 	PM_REQ_WAKEUP,
 	PM_SET_WAKEUP_SOURCE,
 	PM_SYSTEM_SHUTDOWN,
 	/* API for managing PM slaves: */
 	PM_REQ_NODE,
 	PM_RELEASE_NODE,
 	PM_SET_REQUIREMENT,
 	PM_SET_MAX_LATENCY,
 	/* Direct control API functions: */
 	PM_RESET_ASSERT,
 	PM_RESET_GET_STATUS,
 	PM_MMIO_WRITE,
 	PM_MMIO_READ,
 	PM_INIT_FINALIZE,
 	PM_FPGA_LOAD,
 	PM_FPGA_GET_STATUS,
 	PM_GET_CHIPID,
 	PM_SECURE_RSA_AES,
 	PM_SECURE_SHA,
 	PM_SECURE_RSA,
 	PM_PINCTRL_REQUEST,
 	PM_PINCTRL_RELEASE,
 	PM_PINCTRL_GET_FUNCTION,
 	PM_PINCTRL_SET_FUNCTION,
 	PM_PINCTRL_CONFIG_PARAM_GET,
 	PM_PINCTRL_CONFIG_PARAM_SET,
 	PM_IOCTL,
 	/* API to query information from firmware */
 	PM_QUERY_DATA,
 	/* Clock control API functions */
 	PM_CLOCK_ENABLE,
 	PM_CLOCK_DISABLE,
 	PM_CLOCK_GETSTATE,
 	PM_CLOCK_SETDIVIDER,
 	PM_CLOCK_GETDIVIDER,
 	PM_CLOCK_SETPARENT = 43,
 	PM_CLOCK_GETPARENT,
 	PM_SECURE_IMAGE,
 	/* FPGA PL Readback */
 	PM_FPGA_READ,
 	PM_SECURE_AES,
 	/* PLL control API functions */
 	PM_PLL_SET_PARAMETER,
 	PM_PLL_GET_PARAMETER,
 	PM_PLL_SET_MODE,
 	PM_PLL_GET_MODE,
 	/* PM Register Access API */
 	PM_REGISTER_ACCESS,
 	PM_EFUSE_ACCESS,
 	PM_FPGA_GET_VERSION,
 	PM_FPGA_GET_FEATURE_LIST,
 	PM_FEATURE_CHECK = 63,
 	PM_API_MAX = 74
 };

 enum pm_abort_reason {
 	ABORT_REASON_WKUP_EVENT = 100,
 	ABORT_REASON_PU_BUSY,
 	ABORT_REASON_NO_PWRDN,
 	ABORT_REASON_UNKNOWN,
 };

 enum pm_opchar_type {
 	PM_OPCHAR_TYPE_POWER = 1,
 	PM_OPCHAR_TYPE_TEMP,
 	PM_OPCHAR_TYPE_LATENCY,
 };

 /*
  * Subsystem IDs
  */
 typedef enum {
 	XPM_SUBSYSID_PMC,
 	XPM_SUBSYSID_PSM,
 	XPM_SUBSYSID_APU,
 	XPM_SUBSYSID_RPU0_LOCK,
 	XPM_SUBSYSID_RPU0_0,
 	XPM_SUBSYSID_RPU0_1,
 	XPM_SUBSYSID_DDR0,
 	XPM_SUBSYSID_ME,
 	XPM_SUBSYSID_PL,
 	XPM_SUBSYSID_MAX,
 } XPm_SubsystemId;

 /* TODO: move pm_ret_status from device specific location to common location */
 /**
  * enum pm_ret_status - enum represents the return status codes for a PM
  *                      operation.
  * @PM_RET_SUCCESS: success.
  * @PM_RET_ERROR_ARGS: illegal arguments provided (deprecated).
  * @PM_RET_ERROR_NOTSUPPORTED: feature not supported  (deprecated).
  * @PM_RET_ERROR_NOFEATURE: feature is not available.
  * @PM_RET_ERROR_INVALID_CRC: invalid crc in IPI communication.
  * @PM_RET_ERROR_NOT_ENABLED: feature is not enabled.
  * @PM_RET_ERROR_INTERNAL: internal error.
  * @PM_RET_ERROR_CONFLICT: conflict.
  * @PM_RET_ERROR_ACCESS: access rights violation.
  * @PM_RET_ERROR_INVALID_NODE: invalid node.
  * @PM_RET_ERROR_DOUBLE_REQ: duplicate request for same node.
  * @PM_RET_ERROR_ABORT_SUSPEND: suspend procedure has been aborted.
  * @PM_RET_ERROR_TIMEOUT: timeout in communication with PMU.
  * @PM_RET_ERROR_NODE_USED: node is already in use.
  * @PM_RET_ERROR_NO_FEATURE: indicates that the requested feature is not
  *                           supported.
  */
 enum pm_ret_status {
 	PM_RET_SUCCESS,
 	PM_RET_ERROR_ARGS = 1,
 	PM_RET_ERROR_NOTSUPPORTED = 4,
 	PM_RET_ERROR_NOFEATURE = 19,
 	PM_RET_ERROR_INVALID_CRC = 301,
 	PM_RET_ERROR_NOT_ENABLED = 29,
 	PM_RET_ERROR_INTERNAL = 2000,
 	PM_RET_ERROR_CONFLICT = 2001,
 	PM_RET_ERROR_ACCESS = 2002,
 	PM_RET_ERROR_INVALID_NODE = 2003,
 	PM_RET_ERROR_DOUBLE_REQ = 2004,
 	PM_RET_ERROR_ABORT_SUSPEND = 2005,
 	PM_RET_ERROR_TIMEOUT = 2006,
 	PM_RET_ERROR_NODE_USED = 2007,
 	PM_RET_ERROR_NO_FEATURE = 2008
 };

 /*
  * Qids
  */
 enum pm_query_id {
 	XPM_QID_INVALID,
 	XPM_QID_CLOCK_GET_NAME,
 	XPM_QID_CLOCK_GET_TOPOLOGY,
 	XPM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
 	XPM_QID_CLOCK_GET_MUXSOURCES,
 	XPM_QID_CLOCK_GET_ATTRIBUTES,
 	XPM_QID_PINCTRL_GET_NUM_PINS,
 	XPM_QID_PINCTRL_GET_NUM_FUNCTIONS,
 	XPM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS,
 	XPM_QID_PINCTRL_GET_FUNCTION_NAME,
 	XPM_QID_PINCTRL_GET_FUNCTION_GROUPS,
 	XPM_QID_PINCTRL_GET_PIN_GROUPS,
 	XPM_QID_CLOCK_GET_NUM_CLOCKS,
 	XPM_QID_CLOCK_GET_MAX_DIVISOR,
 	XPM_QID_PLD_GET_PARENT,
 };
 #endif /* PM_DEFS_H */
	/*
	* Copyright (c) 2019-2022, Xilinx, Inc. All rights reserved.
	* Copyright (c) 2022-2024, Advanced Micro Devices, Inc. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	/* Versal power management enums and defines */

	#ifndef PM_DEFS_H
	#define PM_DEFS_H

	#include "pm_node.h"

	/*********************************************************************
	* Macro definitions
	********************************************************************/

	/* State arguments of the self suspend */
	#define PM_STATE_CPU_IDLE 0x0U
	#define PM_STATE_CPU_OFF 0x1U
	#define PM_STATE_SUSPEND_TO_RAM 0xFU

	#define MAX_LATENCY (~0U)
	#define MAX_QOS 100U

	/* Processor core device IDs */
	#define APU_DEVID(IDX) NODEID(XPM_NODECLASS_DEVICE, XPM_NODESUBCL_DEV_CORE, \
	XPM_NODETYPE_DEV_CORE_APU, (IDX))

	#define XPM_DEVID_ACPU_0 APU_DEVID(XPM_NODEIDX_DEV_ACPU_0)
	#define XPM_DEVID_ACPU_1 APU_DEVID(XPM_NODEIDX_DEV_ACPU_1)

	#define PERIPH_DEVID(IDX) NODEID((uint32_t)XPM_NODECLASS_DEVICE, \
	(uint32_t)XPM_NODESUBCL_DEV_PERIPH, \
	(uint32_t)XPM_NODETYPE_DEV_PERIPH, (IDX))

	#define PM_GET_CALLBACK_DATA 0xa01U
	#define PM_GET_TRUSTZONE_VERSION 0xa03U
	#define TF_A_PM_REGISTER_SGI 0xa04U

	/* PM API Versions */
	#define PM_API_BASE_VERSION 1U
	#define PM_API_VERSION_2 2U

	/* Loader API ids */
	#define PM_LOAD_PDI 0x701U
	#define PM_LOAD_GET_HANDOFF_PARAMS 0x70BU

	/* System shutdown macros */
	#define XPM_SHUTDOWN_TYPE_SHUTDOWN 0U
	#define XPM_SHUTDOWN_TYPE_RESET 1U
	#define XPM_SHUTDOWN_TYPE_SETSCOPE_ONLY 2U

	#define XPM_SHUTDOWN_SUBTYPE_RST_SUBSYSTEM 0U
	#define XPM_SHUTDOWN_SUBTYPE_RST_PS_ONLY 1U
	#define XPM_SHUTDOWN_SUBTYPE_RST_SYSTEM 2U

	/*********************************************************************
	* Enum definitions
	********************************************************************/

	/*
	* ioctl id
	*/
	enum {
	IOCTL_GET_RPU_OPER_MODE = 0,
	IOCTL_SET_RPU_OPER_MODE = 1,
	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
	IOCTL_TCM_COMB_CONFIG = 3,
	IOCTL_SET_TAPDELAY_BYPASS = 4,
	IOCTL_SD_DLL_RESET = 6,
	IOCTL_SET_SD_TAPDELAY = 7,
	/* Ioctl for clock driver */
	IOCTL_SET_PLL_FRAC_MODE = 8,
	IOCTL_GET_PLL_FRAC_MODE = 9,
	IOCTL_SET_PLL_FRAC_DATA = 10,
	IOCTL_GET_PLL_FRAC_DATA = 11,
	IOCTL_WRITE_GGS = 12,
	IOCTL_READ_GGS = 13,
	IOCTL_WRITE_PGGS = 14,
	IOCTL_READ_PGGS = 15,
	/* IOCTL for ULPI reset */
	IOCTL_ULPI_RESET = 16,
	/* Set healthy bit value */
	IOCTL_SET_BOOT_HEALTH_STATUS = 17,
	IOCTL_AFI = 18,
	/* Probe counter read/write */
	IOCTL_PROBE_COUNTER_READ = 19,
	IOCTL_PROBE_COUNTER_WRITE = 20,
	IOCTL_OSPI_MUX_SELECT = 21,
	/* IOCTL for USB power request */
	IOCTL_USB_SET_STATE = 22,
	/* IOCTL to get last reset reason */
	IOCTL_GET_LAST_RESET_REASON = 23,
	/* AI engine NPI ISR clear */
	IOCTL_AIE_ISR_CLEAR = 24,
	};

	/**
	* enum pm_pll_param - enum represents the parameters for a phase-locked loop.
	* @PM_PLL_PARAM_DIV2: Enable for divide by 2 function inside the PLL.
	* @PM_PLL_PARAM_FBDIV: Feedback divisor integer portion for the PLL.
	* @PM_PLL_PARAM_DATA: Feedback divisor fractional portion for the PLL.
	* @PM_PLL_PARAM_PRE_SRC: Clock source for PLL input.
	* @PM_PLL_PARAM_POST_SRC: Clock source for PLL Bypass mode.
	* @PM_PLL_PARAM_LOCK_DLY: Lock circuit config settings for lock windowsize.
	* @PM_PLL_PARAM_LOCK_CNT: Lock circuit counter setting.
	* @PM_PLL_PARAM_LFHF: PLL loop filter high frequency capacitor control.
	* @PM_PLL_PARAM_CP: PLL charge pump control.
	* @PM_PLL_PARAM_RES: PLL loop filter resistor control.
	* @PM_PLL_PARAM_MAX: Represents the maximum parameter value for the PLL
	*/
	enum pm_pll_param {
	PM_PLL_PARAM_DIV2,
	PM_PLL_PARAM_FBDIV,
	PM_PLL_PARAM_DATA,
	PM_PLL_PARAM_PRE_SRC,
	PM_PLL_PARAM_POST_SRC,
	PM_PLL_PARAM_LOCK_DLY,
	PM_PLL_PARAM_LOCK_CNT,
	PM_PLL_PARAM_LFHF,
	PM_PLL_PARAM_CP,
	PM_PLL_PARAM_RES,
	PM_PLL_PARAM_MAX,
	};

	enum pm_api_id {
	/* Miscellaneous API functions: */
	PM_GET_API_VERSION = 1, /* Do not change or move */
	PM_SET_CONFIGURATION,
	PM_GET_NODE_STATUS,
	PM_GET_OP_CHARACTERISTIC,
	PM_REGISTER_NOTIFIER,
	/* API for suspending of PUs: */
	PM_REQ_SUSPEND,
	PM_SELF_SUSPEND,
	PM_FORCE_POWERDOWN,
	PM_ABORT_SUSPEND,
	PM_REQ_WAKEUP,
	PM_SET_WAKEUP_SOURCE,
	PM_SYSTEM_SHUTDOWN,
	/* API for managing PM slaves: */
	PM_REQ_NODE,
	PM_RELEASE_NODE,
	PM_SET_REQUIREMENT,
	PM_SET_MAX_LATENCY,
	/* Direct control API functions: */
	PM_RESET_ASSERT,
	PM_RESET_GET_STATUS,
	PM_MMIO_WRITE,
	PM_MMIO_READ,
	PM_INIT_FINALIZE,
	PM_FPGA_LOAD,
	PM_FPGA_GET_STATUS,
	PM_GET_CHIPID,
	PM_SECURE_RSA_AES,
	PM_SECURE_SHA,
	PM_SECURE_RSA,
	PM_PINCTRL_REQUEST,
	PM_PINCTRL_RELEASE,
	PM_PINCTRL_GET_FUNCTION,
	PM_PINCTRL_SET_FUNCTION,
	PM_PINCTRL_CONFIG_PARAM_GET,
	PM_PINCTRL_CONFIG_PARAM_SET,
	PM_IOCTL,
	/* API to query information from firmware */
	PM_QUERY_DATA,
	/* Clock control API functions */
	PM_CLOCK_ENABLE,
	PM_CLOCK_DISABLE,
	PM_CLOCK_GETSTATE,
	PM_CLOCK_SETDIVIDER,
	PM_CLOCK_GETDIVIDER,
	PM_CLOCK_SETPARENT = 43,
	PM_CLOCK_GETPARENT,
	PM_SECURE_IMAGE,
	/* FPGA PL Readback */
	PM_FPGA_READ,
	PM_SECURE_AES,
	/* PLL control API functions */
	PM_PLL_SET_PARAMETER,
	PM_PLL_GET_PARAMETER,
	PM_PLL_SET_MODE,
	PM_PLL_GET_MODE,
	/* PM Register Access API */
	PM_REGISTER_ACCESS,
	PM_EFUSE_ACCESS,
	PM_FPGA_GET_VERSION,
	PM_FPGA_GET_FEATURE_LIST,
	PM_FEATURE_CHECK = 63,
	PM_API_MAX = 74
	};

	enum pm_abort_reason {
	ABORT_REASON_WKUP_EVENT = 100,
	ABORT_REASON_PU_BUSY,
	ABORT_REASON_NO_PWRDN,
	ABORT_REASON_UNKNOWN,
	};

	enum pm_opchar_type {
	PM_OPCHAR_TYPE_POWER = 1,
	PM_OPCHAR_TYPE_TEMP,
	PM_OPCHAR_TYPE_LATENCY,
	};

	/*
	* Subsystem IDs
	*/
	typedef enum {
	XPM_SUBSYSID_PMC,
	XPM_SUBSYSID_PSM,
	XPM_SUBSYSID_APU,
	XPM_SUBSYSID_RPU0_LOCK,
	XPM_SUBSYSID_RPU0_0,
	XPM_SUBSYSID_RPU0_1,
	XPM_SUBSYSID_DDR0,
	XPM_SUBSYSID_ME,
	XPM_SUBSYSID_PL,
	XPM_SUBSYSID_MAX,
	} XPm_SubsystemId;

	/* TODO: move pm_ret_status from device specific location to common location */
	/**
	* enum pm_ret_status - enum represents the return status codes for a PM
	* operation.
	* @PM_RET_SUCCESS: success.
	* @PM_RET_ERROR_ARGS: illegal arguments provided (deprecated).
	* @PM_RET_ERROR_NOTSUPPORTED: feature not supported (deprecated).
	* @PM_RET_ERROR_NOFEATURE: feature is not available.
	* @PM_RET_ERROR_INVALID_CRC: invalid crc in IPI communication.
	* @PM_RET_ERROR_NOT_ENABLED: feature is not enabled.
	* @PM_RET_ERROR_INTERNAL: internal error.
	* @PM_RET_ERROR_CONFLICT: conflict.
	* @PM_RET_ERROR_ACCESS: access rights violation.
	* @PM_RET_ERROR_INVALID_NODE: invalid node.
	* @PM_RET_ERROR_DOUBLE_REQ: duplicate request for same node.
	* @PM_RET_ERROR_ABORT_SUSPEND: suspend procedure has been aborted.
	* @PM_RET_ERROR_TIMEOUT: timeout in communication with PMU.
	* @PM_RET_ERROR_NODE_USED: node is already in use.
	* @PM_RET_ERROR_NO_FEATURE: indicates that the requested feature is not
	* supported.
	*/
	enum pm_ret_status {
	PM_RET_SUCCESS,
	PM_RET_ERROR_ARGS = 1,
	PM_RET_ERROR_NOTSUPPORTED = 4,
	PM_RET_ERROR_NOFEATURE = 19,
	PM_RET_ERROR_INVALID_CRC = 301,
	PM_RET_ERROR_NOT_ENABLED = 29,
	PM_RET_ERROR_INTERNAL = 2000,
	PM_RET_ERROR_CONFLICT = 2001,
	PM_RET_ERROR_ACCESS = 2002,
	PM_RET_ERROR_INVALID_NODE = 2003,
	PM_RET_ERROR_DOUBLE_REQ = 2004,
	PM_RET_ERROR_ABORT_SUSPEND = 2005,
	PM_RET_ERROR_TIMEOUT = 2006,
	PM_RET_ERROR_NODE_USED = 2007,
	PM_RET_ERROR_NO_FEATURE = 2008
	};

	/*
	* Qids
	*/
	enum pm_query_id {
	XPM_QID_INVALID,
	XPM_QID_CLOCK_GET_NAME,
	XPM_QID_CLOCK_GET_TOPOLOGY,
	XPM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
	XPM_QID_CLOCK_GET_MUXSOURCES,
	XPM_QID_CLOCK_GET_ATTRIBUTES,
	XPM_QID_PINCTRL_GET_NUM_PINS,
	XPM_QID_PINCTRL_GET_NUM_FUNCTIONS,
	XPM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS,
	XPM_QID_PINCTRL_GET_FUNCTION_NAME,
	XPM_QID_PINCTRL_GET_FUNCTION_GROUPS,
	XPM_QID_PINCTRL_GET_PIN_GROUPS,
	XPM_QID_CLOCK_GET_NUM_CLOCKS,
	XPM_QID_CLOCK_GET_MAX_DIVISOR,
	XPM_QID_PLD_GET_PARENT,
	};
	#endif /* PM_DEFS_H */