| /* |
| * Copyright (c) 2020, Arm Limited. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <common/debug.h> |
| #include <common/fdt_wrappers.h> |
| #include <fconf_hw_config_getter.h> |
| #include <libfdt.h> |
| #include <plat/common/platform.h> |
| |
| struct gicv3_config_t gicv3_config; |
| struct hw_topology_t soc_topology; |
| |
| int fconf_populate_gicv3_config(uintptr_t config) |
| { |
| int err; |
| int node; |
| uintptr_t addr; |
| |
| /* Necessary to work with libfdt APIs */ |
| const void *hw_config_dtb = (const void *)config; |
| |
| /* |
| * Find the offset of the node containing "arm,gic-v3" compatible property. |
| * Populating fconf strucutures dynamically is not supported for legacy |
| * systems which use GICv2 IP. Simply skip extracting GIC properties. |
| */ |
| node = fdt_node_offset_by_compatible(hw_config_dtb, -1, "arm,gic-v3"); |
| if (node < 0) { |
| WARN("FCONF: Unable to locate node with arm,gic-v3 compatible property\n"); |
| return 0; |
| } |
| /* The GICv3 DT binding holds at least two address/size pairs, |
| * the first describing the distributor, the second the redistributors. |
| * See: bindings/interrupt-controller/arm,gic-v3.yaml |
| */ |
| err = fdt_get_reg_props_by_index(hw_config_dtb, node, 0, &addr, NULL); |
| if (err < 0) { |
| ERROR("FCONF: Failed to read GICD reg property of GIC node\n"); |
| return err; |
| } |
| gicv3_config.gicd_base = addr; |
| |
| err = fdt_get_reg_props_by_index(hw_config_dtb, node, 1, &addr, NULL); |
| if (err < 0) { |
| ERROR("FCONF: Failed to read GICR reg property of GIC node\n"); |
| } else { |
| gicv3_config.gicr_base = addr; |
| } |
| |
| return err; |
| } |
| |
| int fconf_populate_topology(uintptr_t config) |
| { |
| int err, node, cluster_node, core_node, thread_node; |
| uint32_t cluster_count = 0, max_cpu_per_cluster = 0, total_cpu_count = 0; |
| uint32_t max_pwr_lvl = 0; |
| |
| /* Necessary to work with libfdt APIs */ |
| const void *hw_config_dtb = (const void *)config; |
| |
| /* Find the offset of the node containing "arm,psci-1.0" compatible property */ |
| node = fdt_node_offset_by_compatible(hw_config_dtb, -1, "arm,psci-1.0"); |
| if (node < 0) { |
| ERROR("FCONF: Unable to locate node with arm,psci-1.0 compatible property\n"); |
| return node; |
| } |
| |
| err = fdt_read_uint32(hw_config_dtb, node, "max-pwr-lvl", &max_pwr_lvl); |
| if (err < 0) { |
| /* |
| * Some legacy FVP dts may not have this property. Assign the default |
| * value. |
| */ |
| WARN("FCONF: Could not locate max-pwr-lvl property\n"); |
| max_pwr_lvl = 2; |
| } |
| |
| assert(max_pwr_lvl <= MPIDR_AFFLVL2); |
| |
| /* Find the offset of the "cpus" node */ |
| node = fdt_path_offset(hw_config_dtb, "/cpus"); |
| if (node < 0) { |
| ERROR("FCONF: Node '%s' not found in hardware configuration dtb\n", "cpus"); |
| return node; |
| } |
| |
| /* A typical cpu-map node in a device tree is shown here for reference |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&CPU2>; |
| }; |
| core1 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| }; |
| */ |
| |
| /* Locate the cpu-map child node */ |
| node = fdt_subnode_offset(hw_config_dtb, node, "cpu-map"); |
| if (node < 0) { |
| ERROR("FCONF: Node '%s' not found in hardware configuration dtb\n", "cpu-map"); |
| return node; |
| } |
| |
| uint32_t cpus_per_cluster[PLAT_ARM_CLUSTER_COUNT] = {0}; |
| |
| /* Iterate through cluster nodes */ |
| fdt_for_each_subnode(cluster_node, hw_config_dtb, node) { |
| assert(cluster_count < PLAT_ARM_CLUSTER_COUNT); |
| |
| /* Iterate through core nodes */ |
| fdt_for_each_subnode(core_node, hw_config_dtb, cluster_node) { |
| /* core nodes may have child nodes i.e., "thread" nodes */ |
| if (fdt_first_subnode(hw_config_dtb, core_node) < 0) { |
| cpus_per_cluster[cluster_count]++; |
| } else { |
| /* Multi-threaded CPU description is found in dtb */ |
| fdt_for_each_subnode(thread_node, hw_config_dtb, core_node) { |
| cpus_per_cluster[cluster_count]++; |
| } |
| |
| /* Since in some dtbs, core nodes may not have thread node, |
| * no need to error if even one child node is not found. |
| */ |
| } |
| } |
| |
| /* Ensure every cluster node has at least 1 child node */ |
| if (cpus_per_cluster[cluster_count] < 1U) { |
| ERROR("FCONF: Unable to locate the core node in cluster %d\n", cluster_count); |
| return -1; |
| } |
| |
| INFO("CLUSTER ID: %d cpu-count: %d\n", cluster_count, cpus_per_cluster[cluster_count]); |
| |
| /* Find the maximum number of cpus in any cluster */ |
| max_cpu_per_cluster = MAX(max_cpu_per_cluster, cpus_per_cluster[cluster_count]); |
| total_cpu_count += cpus_per_cluster[cluster_count]; |
| cluster_count++; |
| } |
| |
| |
| /* At least one cluster node is expected in hardware configuration dtb */ |
| if (cluster_count < 1U) { |
| ERROR("FCONF: Unable to locate the cluster node in cpu-map node\n"); |
| return -1; |
| } |
| |
| soc_topology.plat_max_pwr_level = max_pwr_lvl; |
| soc_topology.plat_cluster_count = cluster_count; |
| soc_topology.cluster_cpu_count = max_cpu_per_cluster; |
| soc_topology.plat_cpu_count = total_cpu_count; |
| |
| return 0; |
| } |
| |
| FCONF_REGISTER_POPULATOR(HW_CONFIG, gicv3_config, fconf_populate_gicv3_config); |
| FCONF_REGISTER_POPULATOR(HW_CONFIG, topology, fconf_populate_topology); |