| /* |
| * Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef ZYNQMP_DEF_H |
| #define ZYNQMP_DEF_H |
| |
| #include <plat/arm/common/smccc_def.h> |
| #include <plat/common/common_def.h> |
| |
| #define ZYNQMP_CONSOLE_ID_cadence 1 |
| #define ZYNQMP_CONSOLE_ID_cadence0 1 |
| #define ZYNQMP_CONSOLE_ID_cadence1 2 |
| #define ZYNQMP_CONSOLE_ID_dcc 3 |
| |
| #define ZYNQMP_CONSOLE_IS(con) (ZYNQMP_CONSOLE_ID_ ## con == ZYNQMP_CONSOLE) |
| |
| /* Default counter frequency */ |
| #define ZYNQMP_DEFAULT_COUNTER_FREQ 0U |
| |
| /* Firmware Image Package */ |
| #define ZYNQMP_PRIMARY_CPU 0 |
| |
| /* Memory location options for Shared data and TSP in ZYNQMP */ |
| #define ZYNQMP_IN_TRUSTED_SRAM 0 |
| #define ZYNQMP_IN_TRUSTED_DRAM 1 |
| |
| /******************************************************************************* |
| * ZYNQMP memory map related constants |
| ******************************************************************************/ |
| /* Aggregate of all devices in the first GB */ |
| #define DEVICE0_BASE U(0xFF000000) |
| #define DEVICE0_SIZE U(0x00E00000) |
| #define DEVICE1_BASE U(0xF9000000) |
| #define DEVICE1_SIZE U(0x00800000) |
| |
| /* For cpu reset APU space here too 0xFE5F1000 CRF_APB*/ |
| #define CRF_APB_BASE U(0xFD1A0000) |
| #define CRF_APB_SIZE U(0x00600000) |
| #define CRF_APB_CLK_BASE U(0xFD1A0020) |
| |
| /* CRF registers and bitfields */ |
| #define CRF_APB_RST_FPD_APU (CRF_APB_BASE + 0X00000104) |
| |
| #define CRF_APB_RST_FPD_APU_ACPU_RESET (U(1) << 0) |
| #define CRF_APB_RST_FPD_APU_ACPU_PWRON_RESET (U(1) << 10) |
| |
| /* CRL registers and bitfields */ |
| #define CRL_APB_BASE U(0xFF5E0000) |
| #define CRL_APB_BOOT_MODE_USER (CRL_APB_BASE + 0x200) |
| #define CRL_APB_RESET_CTRL (CRL_APB_BASE + 0x218) |
| #define CRL_APB_RST_LPD_TOP (CRL_APB_BASE + 0x23C) |
| #define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + U(0x250)) |
| #define CRL_APB_CLK_BASE U(0xFF5E0020) |
| |
| #define CRL_APB_RPU_AMBA_RESET (U(1) << 2) |
| #define CRL_APB_RPLL_CTRL_BYPASS (U(1) << 3) |
| |
| #define CRL_APB_RESET_CTRL_SOFT_RESET (U(1) << 4) |
| |
| #define CRL_APB_BOOT_MODE_MASK (U(0xf) << 0) |
| #define CRL_APB_BOOT_PIN_MASK (U(0xf0f) << 0) |
| #define CRL_APB_BOOT_DRIVE_PIN_1_SHIFT U(9) |
| #define CRL_APB_BOOT_ENABLE_PIN_1_SHIFT U(1) |
| #define CRL_APB_BOOT_ENABLE_PIN_1 (U(0x1) << \ |
| CRL_APB_BOOT_ENABLE_PIN_1_SHIFT) |
| #define CRL_APB_BOOT_DRIVE_PIN_1 (U(0x1) << \ |
| CRL_APB_BOOT_DRIVE_PIN_1_SHIFT) |
| #define ZYNQMP_BOOTMODE_JTAG U(0) |
| #define ZYNQMP_ULPI_RESET_VAL_HIGH (CRL_APB_BOOT_ENABLE_PIN_1 | \ |
| CRL_APB_BOOT_DRIVE_PIN_1) |
| #define ZYNQMP_ULPI_RESET_VAL_LOW CRL_APB_BOOT_ENABLE_PIN_1 |
| |
| /* system counter registers and bitfields */ |
| #define IOU_SCNTRS_BASE U(0xFF260000) |
| #define IOU_SCNTRS_BASEFREQ (IOU_SCNTRS_BASE + 0x20) |
| |
| /* APU registers and bitfields */ |
| #define APU_BASE U(0xFD5C0000) |
| #define APU_CONFIG_0 (APU_BASE + 0x20) |
| #define APU_RVBAR_L_0 (APU_BASE + 0x40) |
| #define APU_RVBAR_H_0 (APU_BASE + 0x44) |
| #define APU_PWRCTL (APU_BASE + 0x90) |
| |
| #define APU_CONFIG_0_VINITHI_SHIFT 8 |
| #define APU_0_PWRCTL_CPUPWRDWNREQ_MASK 1 |
| #define APU_1_PWRCTL_CPUPWRDWNREQ_MASK 2 |
| #define APU_2_PWRCTL_CPUPWRDWNREQ_MASK 4 |
| #define APU_3_PWRCTL_CPUPWRDWNREQ_MASK 8 |
| |
| /* PMU registers and bitfields */ |
| #define PMU_GLOBAL_BASE U(0xFFD80000) |
| #define PMU_GLOBAL_CNTRL (PMU_GLOBAL_BASE + 0) |
| #define PMU_GLOBAL_GEN_STORAGE6 (PMU_GLOBAL_BASE + 0x48) |
| #define PMU_GLOBAL_REQ_PWRUP_STATUS (PMU_GLOBAL_BASE + 0x110) |
| #define PMU_GLOBAL_REQ_PWRUP_EN (PMU_GLOBAL_BASE + 0x118) |
| #define PMU_GLOBAL_REQ_PWRUP_DIS (PMU_GLOBAL_BASE + 0x11c) |
| #define PMU_GLOBAL_REQ_PWRUP_TRIG (PMU_GLOBAL_BASE + 0x120) |
| |
| #define PMU_GLOBAL_CNTRL_FW_IS_PRESENT (1 << 4) |
| |
| /******************************************************************************* |
| * CCI-400 related constants |
| ******************************************************************************/ |
| #define PLAT_ARM_CCI_BASE U(0xFD6E0000) |
| #define PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX 3 |
| #define PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX 4 |
| |
| /******************************************************************************* |
| * GIC-400 & interrupt handling related constants |
| ******************************************************************************/ |
| #define BASE_GICD_BASE U(0xF9010000) |
| #define BASE_GICC_BASE U(0xF9020000) |
| #define BASE_GICH_BASE U(0xF9040000) |
| #define BASE_GICV_BASE U(0xF9060000) |
| |
| #if ZYNQMP_WDT_RESTART |
| #define IRQ_SEC_IPI_APU 67 |
| #define IRQ_TTC3_1 77 |
| #define TTC3_BASE_ADDR U(0xFF140000) |
| #define TTC3_INTR_REGISTER_1 (TTC3_BASE_ADDR + 0x54) |
| #define TTC3_INTR_ENABLE_1 (TTC3_BASE_ADDR + 0x60) |
| #endif |
| |
| #define ARM_IRQ_SEC_PHY_TIMER 29 |
| |
| #define ARM_IRQ_SEC_SGI_0 8 |
| #define ARM_IRQ_SEC_SGI_1 9 |
| #define ARM_IRQ_SEC_SGI_2 10 |
| #define ARM_IRQ_SEC_SGI_3 11 |
| #define ARM_IRQ_SEC_SGI_4 12 |
| #define ARM_IRQ_SEC_SGI_5 13 |
| #define ARM_IRQ_SEC_SGI_6 14 |
| #define ARM_IRQ_SEC_SGI_7 15 |
| |
| #define MAX_INTR_EL3 128 |
| |
| /******************************************************************************* |
| * UART related constants |
| ******************************************************************************/ |
| #define ZYNQMP_UART0_BASE U(0xFF000000) |
| #define ZYNQMP_UART1_BASE U(0xFF010000) |
| |
| #if ZYNQMP_CONSOLE_IS(cadence) || ZYNQMP_CONSOLE_IS(dcc) |
| # define ZYNQMP_UART_BASE ZYNQMP_UART0_BASE |
| #elif ZYNQMP_CONSOLE_IS(cadence1) |
| # define ZYNQMP_UART_BASE ZYNQMP_UART1_BASE |
| #else |
| # error "invalid ZYNQMP_CONSOLE" |
| #endif |
| |
| #define ZYNQMP_CRASH_UART_BASE ZYNQMP_UART_BASE |
| /* impossible to call C routine how it is done now - hardcode any value */ |
| #define ZYNQMP_CRASH_UART_CLK_IN_HZ 100000000 /* FIXME */ |
| /* Must be non zero */ |
| #define ZYNQMP_UART_BAUDRATE 115200 |
| |
| /* Silicon version detection */ |
| #define ZYNQMP_SILICON_VER_MASK 0xF000 |
| #define ZYNQMP_SILICON_VER_SHIFT 12 |
| #define ZYNQMP_CSU_VERSION_SILICON 0 |
| #define ZYNQMP_CSU_VERSION_QEMU 3 |
| |
| #define ZYNQMP_RTL_VER_MASK 0xFF0U |
| #define ZYNQMP_RTL_VER_SHIFT 4 |
| |
| #define ZYNQMP_PS_VER_MASK 0xFU |
| #define ZYNQMP_PS_VER_SHIFT 0 |
| |
| #define ZYNQMP_CSU_BASEADDR U(0xFFCA0000) |
| #define ZYNQMP_CSU_IDCODE_OFFSET 0x40U |
| |
| #define ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT 0U |
| #define ZYNQMP_CSU_IDCODE_XILINX_ID_MASK (0xFFFU << \ |
| ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT) |
| #define ZYNQMP_CSU_IDCODE_XILINX_ID 0x093 |
| |
| #define ZYNQMP_CSU_IDCODE_SVD_SHIFT 12U |
| #define ZYNQMP_CSU_IDCODE_SVD_MASK (0x7U << \ |
| ZYNQMP_CSU_IDCODE_SVD_SHIFT) |
| #define ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT 15U |
| #define ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK (0xFU << \ |
| ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT) |
| #define ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT 19U |
| #define ZYNQMP_CSU_IDCODE_SUB_FAMILY_MASK (0x3U << \ |
| ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT) |
| #define ZYNQMP_CSU_IDCODE_FAMILY_SHIFT 21U |
| #define ZYNQMP_CSU_IDCODE_FAMILY_MASK (0x7FU << \ |
| ZYNQMP_CSU_IDCODE_FAMILY_SHIFT) |
| #define ZYNQMP_CSU_IDCODE_FAMILY 0x23 |
| |
| #define ZYNQMP_CSU_IDCODE_REVISION_SHIFT 28U |
| #define ZYNQMP_CSU_IDCODE_REVISION_MASK (0xFU << \ |
| ZYNQMP_CSU_IDCODE_REVISION_SHIFT) |
| #define ZYNQMP_CSU_IDCODE_REVISION 0U |
| |
| #define ZYNQMP_CSU_VERSION_OFFSET 0x44U |
| |
| /* Efuse */ |
| #define EFUSE_BASEADDR U(0xFFCC0000) |
| #define EFUSE_IPDISABLE_OFFSET 0x1018 |
| #define EFUSE_IPDISABLE_VERSION 0x1FFU |
| #define ZYNQMP_EFUSE_IPDISABLE_SHIFT 20 |
| |
| /* Access control register defines */ |
| #define ACTLR_EL3_L2ACTLR_BIT (1 << 6) |
| #define ACTLR_EL3_CPUACTLR_BIT (1 << 0) |
| |
| #define FPD_SLCR_BASEADDR U(0xFD610000) |
| #define IOU_SLCR_BASEADDR U(0xFF180000) |
| |
| #define ZYNQMP_RPU_GLBL_CNTL U(0xFF9A0000) |
| #define ZYNQMP_RPU0_CFG U(0xFF9A0100) |
| #define ZYNQMP_RPU1_CFG U(0xFF9A0200) |
| #define ZYNQMP_SLSPLIT_MASK U(0x08) |
| #define ZYNQMP_TCM_COMB_MASK U(0x40) |
| #define ZYNQMP_SLCLAMP_MASK U(0x10) |
| #define ZYNQMP_VINITHI_MASK U(0x04) |
| |
| /* Tap delay bypass */ |
| #define IOU_TAPDLY_BYPASS U(0XFF180390) |
| #define TAP_DELAY_MASK U(0x7) |
| |
| /* SGMII mode */ |
| #define IOU_GEM_CTRL U(0xFF180360) |
| #define IOU_GEM_CLK_CTRL U(0xFF180308) |
| #define SGMII_SD_MASK U(0x3) |
| #define SGMII_SD_OFFSET U(2) |
| #define SGMII_PCS_SD_0 U(0x0) |
| #define SGMII_PCS_SD_1 U(0x1) |
| #define SGMII_PCS_SD_PHY U(0x2) |
| #define GEM_SGMII_MASK U(0x4) |
| #define GEM_CLK_CTRL_MASK U(0xF) |
| #define GEM_CLK_CTRL_OFFSET U(5) |
| #define GEM_RX_SRC_SEL_GTR U(0x1) |
| #define GEM_SGMII_MODE U(0x4) |
| |
| /* SD DLL reset */ |
| #define ZYNQMP_SD_DLL_CTRL U(0xFF180358) |
| #define ZYNQMP_SD0_DLL_RST_MASK U(0x00000004) |
| #define ZYNQMP_SD0_DLL_RST U(0x00000004) |
| #define ZYNQMP_SD1_DLL_RST_MASK U(0x00040000) |
| #define ZYNQMP_SD1_DLL_RST U(0x00040000) |
| |
| /* SD tap delay */ |
| #define ZYNQMP_SD_DLL_CTRL U(0xFF180358) |
| #define ZYNQMP_SD_ITAP_DLY U(0xFF180314) |
| #define ZYNQMP_SD_OTAP_DLY U(0xFF180318) |
| #define ZYNQMP_SD_TAP_OFFSET U(16) |
| #define ZYNQMP_SD_ITAPCHGWIN_MASK U(0x200) |
| #define ZYNQMP_SD_ITAPCHGWIN U(0x200) |
| #define ZYNQMP_SD_ITAPDLYENA_MASK U(0x100) |
| #define ZYNQMP_SD_ITAPDLYENA U(0x100) |
| #define ZYNQMP_SD_ITAPDLYSEL_MASK U(0xFF) |
| #define ZYNQMP_SD_OTAPDLYSEL_MASK U(0x3F) |
| #define ZYNQMP_SD_OTAPDLYENA_MASK U(0x40) |
| #define ZYNQMP_SD_OTAPDLYENA U(0x40) |
| |
| /* Clock control registers */ |
| /* Full power domain clocks */ |
| #define CRF_APB_APLL_CTRL (CRF_APB_CLK_BASE + 0x00) |
| #define CRF_APB_DPLL_CTRL (CRF_APB_CLK_BASE + 0x0c) |
| #define CRF_APB_VPLL_CTRL (CRF_APB_CLK_BASE + 0x18) |
| #define CRF_APB_PLL_STATUS (CRF_APB_CLK_BASE + 0x24) |
| #define CRF_APB_APLL_TO_LPD_CTRL (CRF_APB_CLK_BASE + 0x28) |
| #define CRF_APB_DPLL_TO_LPD_CTRL (CRF_APB_CLK_BASE + 0x2c) |
| #define CRF_APB_VPLL_TO_LPD_CTRL (CRF_APB_CLK_BASE + 0x30) |
| /* Peripheral clocks */ |
| #define CRF_APB_ACPU_CTRL (CRF_APB_CLK_BASE + 0x40) |
| #define CRF_APB_DBG_TRACE_CTRL (CRF_APB_CLK_BASE + 0x44) |
| #define CRF_APB_DBG_FPD_CTRL (CRF_APB_CLK_BASE + 0x48) |
| #define CRF_APB_DP_VIDEO_REF_CTRL (CRF_APB_CLK_BASE + 0x50) |
| #define CRF_APB_DP_AUDIO_REF_CTRL (CRF_APB_CLK_BASE + 0x54) |
| #define CRF_APB_DP_STC_REF_CTRL (CRF_APB_CLK_BASE + 0x5c) |
| #define CRF_APB_DDR_CTRL (CRF_APB_CLK_BASE + 0x60) |
| #define CRF_APB_GPU_REF_CTRL (CRF_APB_CLK_BASE + 0x64) |
| #define CRF_APB_SATA_REF_CTRL (CRF_APB_CLK_BASE + 0x80) |
| #define CRF_APB_PCIE_REF_CTRL (CRF_APB_CLK_BASE + 0x94) |
| #define CRF_APB_GDMA_REF_CTRL (CRF_APB_CLK_BASE + 0x98) |
| #define CRF_APB_DPDMA_REF_CTRL (CRF_APB_CLK_BASE + 0x9c) |
| #define CRF_APB_TOPSW_MAIN_CTRL (CRF_APB_CLK_BASE + 0xa0) |
| #define CRF_APB_TOPSW_LSBUS_CTRL (CRF_APB_CLK_BASE + 0xa4) |
| #define CRF_APB_GTGREF0_REF_CTRL (CRF_APB_CLK_BASE + 0xa8) |
| #define CRF_APB_DBG_TSTMP_CTRL (CRF_APB_CLK_BASE + 0xd8) |
| |
| /* Low power domain clocks */ |
| #define CRL_APB_IOPLL_CTRL (CRL_APB_CLK_BASE + 0x00) |
| #define CRL_APB_RPLL_CTRL (CRL_APB_CLK_BASE + 0x10) |
| #define CRL_APB_PLL_STATUS (CRL_APB_CLK_BASE + 0x20) |
| #define CRL_APB_IOPLL_TO_FPD_CTRL (CRL_APB_CLK_BASE + 0x24) |
| #define CRL_APB_RPLL_TO_FPD_CTRL (CRL_APB_CLK_BASE + 0x28) |
| /* Peripheral clocks */ |
| #define CRL_APB_USB3_DUAL_REF_CTRL (CRL_APB_CLK_BASE + 0x2c) |
| #define CRL_APB_GEM0_REF_CTRL (CRL_APB_CLK_BASE + 0x30) |
| #define CRL_APB_GEM1_REF_CTRL (CRL_APB_CLK_BASE + 0x34) |
| #define CRL_APB_GEM2_REF_CTRL (CRL_APB_CLK_BASE + 0x38) |
| #define CRL_APB_GEM3_REF_CTRL (CRL_APB_CLK_BASE + 0x3c) |
| #define CRL_APB_USB0_BUS_REF_CTRL (CRL_APB_CLK_BASE + 0x40) |
| #define CRL_APB_USB1_BUS_REF_CTRL (CRL_APB_CLK_BASE + 0x44) |
| #define CRL_APB_QSPI_REF_CTRL (CRL_APB_CLK_BASE + 0x48) |
| #define CRL_APB_SDIO0_REF_CTRL (CRL_APB_CLK_BASE + 0x4c) |
| #define CRL_APB_SDIO1_REF_CTRL (CRL_APB_CLK_BASE + 0x50) |
| #define CRL_APB_UART0_REF_CTRL (CRL_APB_CLK_BASE + 0x54) |
| #define CRL_APB_UART1_REF_CTRL (CRL_APB_CLK_BASE + 0x58) |
| #define CRL_APB_SPI0_REF_CTRL (CRL_APB_CLK_BASE + 0x5c) |
| #define CRL_APB_SPI1_REF_CTRL (CRL_APB_CLK_BASE + 0x60) |
| #define CRL_APB_CAN0_REF_CTRL (CRL_APB_CLK_BASE + 0x64) |
| #define CRL_APB_CAN1_REF_CTRL (CRL_APB_CLK_BASE + 0x68) |
| #define CRL_APB_CPU_R5_CTRL (CRL_APB_CLK_BASE + 0x70) |
| #define CRL_APB_IOU_SWITCH_CTRL (CRL_APB_CLK_BASE + 0x7c) |
| #define CRL_APB_CSU_PLL_CTRL (CRL_APB_CLK_BASE + 0x80) |
| #define CRL_APB_PCAP_CTRL (CRL_APB_CLK_BASE + 0x84) |
| #define CRL_APB_LPD_SWITCH_CTRL (CRL_APB_CLK_BASE + 0x88) |
| #define CRL_APB_LPD_LSBUS_CTRL (CRL_APB_CLK_BASE + 0x8c) |
| #define CRL_APB_DBG_LPD_CTRL (CRL_APB_CLK_BASE + 0x90) |
| #define CRL_APB_NAND_REF_CTRL (CRL_APB_CLK_BASE + 0x94) |
| #define CRL_APB_ADMA_REF_CTRL (CRL_APB_CLK_BASE + 0x98) |
| #define CRL_APB_PL0_REF_CTRL (CRL_APB_CLK_BASE + 0xa0) |
| #define CRL_APB_PL1_REF_CTRL (CRL_APB_CLK_BASE + 0xa4) |
| #define CRL_APB_PL2_REF_CTRL (CRL_APB_CLK_BASE + 0xa8) |
| #define CRL_APB_PL3_REF_CTRL (CRL_APB_CLK_BASE + 0xac) |
| #define CRL_APB_PL0_THR_CNT (CRL_APB_CLK_BASE + 0xb4) |
| #define CRL_APB_PL1_THR_CNT (CRL_APB_CLK_BASE + 0xbc) |
| #define CRL_APB_PL2_THR_CNT (CRL_APB_CLK_BASE + 0xc4) |
| #define CRL_APB_PL3_THR_CNT (CRL_APB_CLK_BASE + 0xdc) |
| #define CRL_APB_GEM_TSU_REF_CTRL (CRL_APB_CLK_BASE + 0xe0) |
| #define CRL_APB_DLL_REF_CTRL (CRL_APB_CLK_BASE + 0xe4) |
| #define CRL_APB_AMS_REF_CTRL (CRL_APB_CLK_BASE + 0xe8) |
| #define CRL_APB_I2C0_REF_CTRL (CRL_APB_CLK_BASE + 0x100) |
| #define CRL_APB_I2C1_REF_CTRL (CRL_APB_CLK_BASE + 0x104) |
| #define CRL_APB_TIMESTAMP_REF_CTRL (CRL_APB_CLK_BASE + 0x108) |
| #define IOU_SLCR_GEM_CLK_CTRL (IOU_SLCR_BASEADDR + 0x308) |
| #define IOU_SLCR_CAN_MIO_CTRL (IOU_SLCR_BASEADDR + 0x304) |
| #define FPD_SLCR_WDT_CLK_SEL (FPD_SLCR_BASEADDR + 0x100) |
| #define IOU_SLCR_WDT_CLK_SEL (IOU_SLCR_BASEADDR + 0x300) |
| |
| /* Global general storage register base address */ |
| #define GGS_BASEADDR (0xFFD80030U) |
| #define GGS_NUM_REGS U(4) |
| |
| /* Persistent global general storage register base address */ |
| #define PGGS_BASEADDR (0xFFD80050U) |
| #define PGGS_NUM_REGS U(4) |
| |
| /* PMU GGS4 register 4 is used for warm restart boot health status */ |
| #define PMU_GLOBAL_GEN_STORAGE4 (GGS_BASEADDR + 0x10) |
| /* Warm restart boot health status mask */ |
| #define PM_BOOT_HEALTH_STATUS_MASK U(0x01) |
| /* WDT restart scope shift and mask */ |
| #define RESTART_SCOPE_SHIFT (3) |
| #define RESTART_SCOPE_MASK (0x3U << RESTART_SCOPE_SHIFT) |
| |
| /* AFI registers */ |
| #define AFIFM6_WRCTRL U(13) |
| #define FABRIC_WIDTH U(3) |
| |
| /* CSUDMA Module Base Address*/ |
| #define CSUDMA_BASE U(0xFFC80000) |
| |
| /* RSA-CORE Module Base Address*/ |
| #define RSA_CORE_BASE U(0xFFCE0000) |
| |
| #endif /* ZYNQMP_DEF_H */ |