| /* |
| * Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| |
| #include <common/debug.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/st/regulator.h> |
| #include <drivers/st/stm32_i2c.h> |
| #include <drivers/st/stm32mp_pmic.h> |
| #include <drivers/st/stpmic1.h> |
| #include <lib/mmio.h> |
| #include <lib/utils_def.h> |
| #include <libfdt.h> |
| |
| #include <platform_def.h> |
| |
| #define PMIC_NODE_NOT_FOUND 1 |
| |
| static struct i2c_handle_s i2c_handle; |
| static uint32_t pmic_i2c_addr; |
| |
| static int register_pmic(void); |
| |
| static int dt_get_pmic_node(void *fdt) |
| { |
| static int node = -FDT_ERR_BADOFFSET; |
| |
| if (node == -FDT_ERR_BADOFFSET) { |
| node = fdt_node_offset_by_compatible(fdt, -1, "st,stpmic1"); |
| } |
| |
| return node; |
| } |
| |
| int dt_pmic_status(void) |
| { |
| static int status = -FDT_ERR_BADVALUE; |
| int node; |
| void *fdt; |
| |
| if (status != -FDT_ERR_BADVALUE) { |
| return status; |
| } |
| |
| if (fdt_get_address(&fdt) == 0) { |
| return -ENOENT; |
| } |
| |
| node = dt_get_pmic_node(fdt); |
| if (node <= 0) { |
| status = -FDT_ERR_NOTFOUND; |
| |
| return status; |
| } |
| |
| status = (int)fdt_get_status(node); |
| |
| return status; |
| } |
| |
| static bool dt_pmic_is_secure(void) |
| { |
| int status = dt_pmic_status(); |
| |
| return (status >= 0) && |
| (status == DT_SECURE) && |
| (i2c_handle.dt_status == DT_SECURE); |
| } |
| |
| /* |
| * Get PMIC and its I2C bus configuration from the device tree. |
| * Return 0 on success, negative on error, 1 if no PMIC node is defined. |
| */ |
| static int dt_pmic_i2c_config(struct dt_node_info *i2c_info, |
| struct stm32_i2c_init_s *init) |
| { |
| static int i2c_node = -FDT_ERR_NOTFOUND; |
| void *fdt; |
| |
| if (fdt_get_address(&fdt) == 0) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| if (i2c_node == -FDT_ERR_NOTFOUND) { |
| int pmic_node; |
| const fdt32_t *cuint; |
| |
| pmic_node = dt_get_pmic_node(fdt); |
| if (pmic_node < 0) { |
| return PMIC_NODE_NOT_FOUND; |
| } |
| |
| cuint = fdt_getprop(fdt, pmic_node, "reg", NULL); |
| if (cuint == NULL) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| pmic_i2c_addr = fdt32_to_cpu(*cuint) << 1; |
| if (pmic_i2c_addr > UINT16_MAX) { |
| return -FDT_ERR_BADVALUE; |
| } |
| |
| i2c_node = fdt_parent_offset(fdt, pmic_node); |
| if (i2c_node < 0) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| } |
| |
| dt_fill_device_info(i2c_info, i2c_node); |
| if (i2c_info->base == 0U) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| return stm32_i2c_get_setup_from_fdt(fdt, i2c_node, init); |
| } |
| |
| bool initialize_pmic_i2c(void) |
| { |
| int ret; |
| struct dt_node_info i2c_info; |
| struct i2c_handle_s *i2c = &i2c_handle; |
| struct stm32_i2c_init_s i2c_init; |
| |
| ret = dt_pmic_i2c_config(&i2c_info, &i2c_init); |
| if (ret < 0) { |
| ERROR("I2C configuration failed %d\n", ret); |
| panic(); |
| } |
| |
| if (ret != 0) { |
| return false; |
| } |
| |
| /* Initialize PMIC I2C */ |
| i2c->i2c_base_addr = i2c_info.base; |
| i2c->dt_status = i2c_info.status; |
| i2c->clock = i2c_info.clock; |
| i2c->i2c_state = I2C_STATE_RESET; |
| i2c_init.own_address1 = pmic_i2c_addr; |
| i2c_init.addressing_mode = I2C_ADDRESSINGMODE_7BIT; |
| i2c_init.dual_address_mode = I2C_DUALADDRESS_DISABLE; |
| i2c_init.own_address2 = 0; |
| i2c_init.own_address2_masks = I2C_OAR2_OA2NOMASK; |
| i2c_init.general_call_mode = I2C_GENERALCALL_DISABLE; |
| i2c_init.no_stretch_mode = I2C_NOSTRETCH_DISABLE; |
| i2c_init.analog_filter = 1; |
| i2c_init.digital_filter_coef = 0; |
| |
| ret = stm32_i2c_init(i2c, &i2c_init); |
| if (ret != 0) { |
| ERROR("Cannot initialize I2C %x (%d)\n", |
| i2c->i2c_base_addr, ret); |
| panic(); |
| } |
| |
| if (!stm32_i2c_is_device_ready(i2c, pmic_i2c_addr, 1, |
| I2C_TIMEOUT_BUSY_MS)) { |
| ERROR("I2C device not ready\n"); |
| panic(); |
| } |
| |
| stpmic1_bind_i2c(i2c, (uint16_t)pmic_i2c_addr); |
| |
| return true; |
| } |
| |
| static void register_pmic_shared_peripherals(void) |
| { |
| uintptr_t i2c_base = i2c_handle.i2c_base_addr; |
| |
| if (dt_pmic_is_secure()) { |
| stm32mp_register_secure_periph_iomem(i2c_base); |
| } else { |
| if (i2c_base != 0U) { |
| stm32mp_register_non_secure_periph_iomem(i2c_base); |
| } |
| } |
| } |
| |
| void initialize_pmic(void) |
| { |
| if (!initialize_pmic_i2c()) { |
| VERBOSE("No PMIC\n"); |
| return; |
| } |
| |
| register_pmic_shared_peripherals(); |
| |
| if (register_pmic() < 0) { |
| panic(); |
| } |
| |
| if (stpmic1_powerctrl_on() < 0) { |
| panic(); |
| } |
| |
| } |
| |
| #if DEBUG |
| void print_pmic_info_and_debug(void) |
| { |
| unsigned long pmic_version; |
| |
| if (stpmic1_get_version(&pmic_version) != 0) { |
| ERROR("Failed to access PMIC\n"); |
| panic(); |
| } |
| |
| INFO("PMIC version = 0x%02lx\n", pmic_version); |
| } |
| #endif |
| |
| int pmic_ddr_power_init(enum ddr_type ddr_type) |
| { |
| int status; |
| uint16_t buck3_min_mv; |
| struct rdev *buck2, *buck3, *vref; |
| struct rdev *ldo3 __unused; |
| |
| buck2 = regulator_get_by_name("buck2"); |
| if (buck2 == NULL) { |
| return -ENOENT; |
| } |
| |
| #if STM32MP15 |
| ldo3 = regulator_get_by_name("ldo3"); |
| if (ldo3 == NULL) { |
| return -ENOENT; |
| } |
| #endif |
| |
| vref = regulator_get_by_name("vref_ddr"); |
| if (vref == NULL) { |
| return -ENOENT; |
| } |
| |
| switch (ddr_type) { |
| case STM32MP_DDR3: |
| #if STM32MP15 |
| status = regulator_set_flag(ldo3, REGUL_SINK_SOURCE); |
| if (status != 0) { |
| return status; |
| } |
| #endif |
| |
| status = regulator_set_min_voltage(buck2); |
| if (status != 0) { |
| return status; |
| } |
| |
| status = regulator_enable(buck2); |
| if (status != 0) { |
| return status; |
| } |
| |
| status = regulator_enable(vref); |
| if (status != 0) { |
| return status; |
| } |
| |
| #if STM32MP15 |
| status = regulator_enable(ldo3); |
| if (status != 0) { |
| return status; |
| } |
| #endif |
| break; |
| |
| case STM32MP_LPDDR2: |
| case STM32MP_LPDDR3: |
| /* |
| * Set LDO3 to 1.8V |
| * Set LDO3 to bypass mode if BUCK3 = 1.8V |
| * Set LDO3 to normal mode if BUCK3 != 1.8V |
| */ |
| buck3 = regulator_get_by_name("buck3"); |
| if (buck3 == NULL) { |
| return -ENOENT; |
| } |
| |
| regulator_get_range(buck3, &buck3_min_mv, NULL); |
| |
| #if STM32MP15 |
| if (buck3_min_mv != 1800) { |
| status = regulator_set_min_voltage(ldo3); |
| if (status != 0) { |
| return status; |
| } |
| } else { |
| status = regulator_set_flag(ldo3, REGUL_ENABLE_BYPASS); |
| if (status != 0) { |
| return status; |
| } |
| } |
| #endif |
| |
| status = regulator_set_min_voltage(buck2); |
| if (status != 0) { |
| return status; |
| } |
| |
| #if STM32MP15 |
| status = regulator_enable(ldo3); |
| if (status != 0) { |
| return status; |
| } |
| #endif |
| |
| status = regulator_enable(buck2); |
| if (status != 0) { |
| return status; |
| } |
| |
| status = regulator_enable(vref); |
| if (status != 0) { |
| return status; |
| } |
| break; |
| |
| default: |
| break; |
| }; |
| |
| return 0; |
| } |
| |
| int pmic_voltages_init(void) |
| { |
| #if STM32MP13 |
| struct rdev *buck1, *buck4; |
| int status; |
| |
| buck1 = regulator_get_by_name("buck1"); |
| if (buck1 == NULL) { |
| return -ENOENT; |
| } |
| |
| buck4 = regulator_get_by_name("buck4"); |
| if (buck4 == NULL) { |
| return -ENOENT; |
| } |
| |
| status = regulator_set_min_voltage(buck1); |
| if (status != 0) { |
| return status; |
| } |
| |
| status = regulator_set_min_voltage(buck4); |
| if (status != 0) { |
| return status; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| enum { |
| STPMIC1_BUCK1 = 0, |
| STPMIC1_BUCK2, |
| STPMIC1_BUCK3, |
| STPMIC1_BUCK4, |
| STPMIC1_LDO1, |
| STPMIC1_LDO2, |
| STPMIC1_LDO3, |
| STPMIC1_LDO4, |
| STPMIC1_LDO5, |
| STPMIC1_LDO6, |
| STPMIC1_VREF_DDR, |
| STPMIC1_BOOST, |
| STPMIC1_VBUS_OTG, |
| STPMIC1_SW_OUT, |
| }; |
| |
| static int pmic_set_state(const struct regul_description *desc, bool enable) |
| { |
| VERBOSE("%s: set state to %d\n", desc->node_name, enable); |
| |
| if (enable == STATE_ENABLE) { |
| return stpmic1_regulator_enable(desc->node_name); |
| } else { |
| return stpmic1_regulator_disable(desc->node_name); |
| } |
| } |
| |
| static int pmic_get_state(const struct regul_description *desc) |
| { |
| VERBOSE("%s: get state\n", desc->node_name); |
| |
| return stpmic1_is_regulator_enabled(desc->node_name); |
| } |
| |
| static int pmic_get_voltage(const struct regul_description *desc) |
| { |
| VERBOSE("%s: get volt\n", desc->node_name); |
| |
| return stpmic1_regulator_voltage_get(desc->node_name); |
| } |
| |
| static int pmic_set_voltage(const struct regul_description *desc, uint16_t mv) |
| { |
| VERBOSE("%s: get volt\n", desc->node_name); |
| |
| return stpmic1_regulator_voltage_set(desc->node_name, mv); |
| } |
| |
| static int pmic_list_voltages(const struct regul_description *desc, |
| const uint16_t **levels, size_t *count) |
| { |
| VERBOSE("%s: list volt\n", desc->node_name); |
| |
| return stpmic1_regulator_levels_mv(desc->node_name, levels, count); |
| } |
| |
| static int pmic_set_flag(const struct regul_description *desc, uint16_t flag) |
| { |
| VERBOSE("%s: set_flag 0x%x\n", desc->node_name, flag); |
| |
| switch (flag) { |
| case REGUL_OCP: |
| return stpmic1_regulator_icc_set(desc->node_name); |
| |
| case REGUL_ACTIVE_DISCHARGE: |
| return stpmic1_active_discharge_mode_set(desc->node_name); |
| |
| case REGUL_PULL_DOWN: |
| return stpmic1_regulator_pull_down_set(desc->node_name); |
| |
| case REGUL_MASK_RESET: |
| return stpmic1_regulator_mask_reset_set(desc->node_name); |
| |
| case REGUL_SINK_SOURCE: |
| return stpmic1_regulator_sink_mode_set(desc->node_name); |
| |
| case REGUL_ENABLE_BYPASS: |
| return stpmic1_regulator_bypass_mode_set(desc->node_name); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct regul_ops pmic_ops = { |
| .set_state = pmic_set_state, |
| .get_state = pmic_get_state, |
| .set_voltage = pmic_set_voltage, |
| .get_voltage = pmic_get_voltage, |
| .list_voltages = pmic_list_voltages, |
| .set_flag = pmic_set_flag, |
| }; |
| |
| #define DEFINE_REGU(name) { \ |
| .node_name = name, \ |
| .ops = &pmic_ops, \ |
| .driver_data = NULL, \ |
| .enable_ramp_delay = 1000, \ |
| } |
| |
| static const struct regul_description pmic_regs[] = { |
| [STPMIC1_BUCK1] = DEFINE_REGU("buck1"), |
| [STPMIC1_BUCK2] = DEFINE_REGU("buck2"), |
| [STPMIC1_BUCK3] = DEFINE_REGU("buck3"), |
| [STPMIC1_BUCK4] = DEFINE_REGU("buck4"), |
| [STPMIC1_LDO1] = DEFINE_REGU("ldo1"), |
| [STPMIC1_LDO2] = DEFINE_REGU("ldo2"), |
| [STPMIC1_LDO3] = DEFINE_REGU("ldo3"), |
| [STPMIC1_LDO4] = DEFINE_REGU("ldo4"), |
| [STPMIC1_LDO5] = DEFINE_REGU("ldo5"), |
| [STPMIC1_LDO6] = DEFINE_REGU("ldo6"), |
| [STPMIC1_VREF_DDR] = DEFINE_REGU("vref_ddr"), |
| [STPMIC1_BOOST] = DEFINE_REGU("boost"), |
| [STPMIC1_VBUS_OTG] = DEFINE_REGU("pwr_sw1"), |
| [STPMIC1_SW_OUT] = DEFINE_REGU("pwr_sw2"), |
| }; |
| |
| #define NB_REG ARRAY_SIZE(pmic_regs) |
| |
| static int register_pmic(void) |
| { |
| void *fdt; |
| int pmic_node, regulators_node, subnode; |
| |
| VERBOSE("Register pmic\n"); |
| |
| if (fdt_get_address(&fdt) == 0) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| pmic_node = dt_get_pmic_node(fdt); |
| if (pmic_node < 0) { |
| return pmic_node; |
| } |
| |
| regulators_node = fdt_subnode_offset(fdt, pmic_node, "regulators"); |
| if (regulators_node < 0) { |
| return -ENOENT; |
| } |
| |
| fdt_for_each_subnode(subnode, fdt, regulators_node) { |
| const char *reg_name = fdt_get_name(fdt, subnode, NULL); |
| const struct regul_description *desc; |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < NB_REG; i++) { |
| desc = &pmic_regs[i]; |
| if (strcmp(desc->node_name, reg_name) == 0) { |
| break; |
| } |
| } |
| assert(i < NB_REG); |
| |
| ret = regulator_register(desc, subnode); |
| if (ret != 0) { |
| WARN("%s:%d failed to register %s\n", __func__, |
| __LINE__, reg_name); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |