| /* |
| * Copyright (c) 2017-2020, NVIDIA CORPORATION. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch_helpers.h> |
| #include <assert.h> |
| #include <common/debug.h> |
| #include <errno.h> |
| #include <stdbool.h> |
| #include <stddef.h> |
| #include <string.h> |
| |
| #include "ivc.h" |
| |
| /* |
| * IVC channel reset protocol. |
| * |
| * Each end uses its tx_channel.state to indicate its synchronization state. |
| */ |
| enum { |
| /* |
| * This value is zero for backwards compatibility with services that |
| * assume channels to be initially zeroed. Such channels are in an |
| * initially valid state, but cannot be asynchronously reset, and must |
| * maintain a valid state at all times. |
| * |
| * The transmitting end can enter the established state from the sync or |
| * ack state when it observes the receiving endpoint in the ack or |
| * established state, indicating that has cleared the counters in our |
| * rx_channel. |
| */ |
| ivc_state_established = U(0), |
| |
| /* |
| * If an endpoint is observed in the sync state, the remote endpoint is |
| * allowed to clear the counters it owns asynchronously with respect to |
| * the current endpoint. Therefore, the current endpoint is no longer |
| * allowed to communicate. |
| */ |
| ivc_state_sync = U(1), |
| |
| /* |
| * When the transmitting end observes the receiving end in the sync |
| * state, it can clear the w_count and r_count and transition to the ack |
| * state. If the remote endpoint observes us in the ack state, it can |
| * return to the established state once it has cleared its counters. |
| */ |
| ivc_state_ack = U(2) |
| }; |
| |
| /* |
| * This structure is divided into two-cache aligned parts, the first is only |
| * written through the tx_channel pointer, while the second is only written |
| * through the rx_channel pointer. This delineates ownership of the cache lines, |
| * which is critical to performance and necessary in non-cache coherent |
| * implementations. |
| */ |
| struct ivc_channel_header { |
| struct { |
| /* fields owned by the transmitting end */ |
| uint32_t w_count; |
| uint32_t state; |
| uint32_t w_rsvd[IVC_CHHDR_TX_FIELDS - 2]; |
| }; |
| struct { |
| /* fields owned by the receiving end */ |
| uint32_t r_count; |
| uint32_t r_rsvd[IVC_CHHDR_RX_FIELDS - 1]; |
| }; |
| }; |
| |
| static inline bool ivc_channel_empty(const struct ivc *ivc, |
| volatile const struct ivc_channel_header *ch) |
| { |
| /* |
| * This function performs multiple checks on the same values with |
| * security implications, so sample the counters' current values in |
| * shared memory to ensure that these checks use the same values. |
| */ |
| uint32_t wr_count = ch->w_count; |
| uint32_t rd_count = ch->r_count; |
| bool ret = false; |
| |
| (void)ivc; |
| |
| /* |
| * Perform an over-full check to prevent denial of service attacks where |
| * a server could be easily fooled into believing that there's an |
| * extremely large number of frames ready, since receivers are not |
| * expected to check for full or over-full conditions. |
| * |
| * Although the channel isn't empty, this is an invalid case caused by |
| * a potentially malicious peer, so returning empty is safer, because it |
| * gives the impression that the channel has gone silent. |
| */ |
| if (((wr_count - rd_count) > ivc->nframes) || (wr_count == rd_count)) { |
| ret = true; |
| } |
| |
| return ret; |
| } |
| |
| static inline bool ivc_channel_full(const struct ivc *ivc, |
| volatile const struct ivc_channel_header *ch) |
| { |
| uint32_t wr_count = ch->w_count; |
| uint32_t rd_count = ch->r_count; |
| |
| (void)ivc; |
| |
| /* |
| * Invalid cases where the counters indicate that the queue is over |
| * capacity also appear full. |
| */ |
| return ((wr_count - rd_count) >= ivc->nframes); |
| } |
| |
| static inline uint32_t ivc_channel_avail_count(const struct ivc *ivc, |
| volatile const struct ivc_channel_header *ch) |
| { |
| uint32_t wr_count = ch->w_count; |
| uint32_t rd_count = ch->r_count; |
| |
| (void)ivc; |
| |
| /* |
| * This function isn't expected to be used in scenarios where an |
| * over-full situation can lead to denial of service attacks. See the |
| * comment in ivc_channel_empty() for an explanation about special |
| * over-full considerations. |
| */ |
| return (wr_count - rd_count); |
| } |
| |
| static inline void ivc_advance_tx(struct ivc *ivc) |
| { |
| ivc->tx_channel->w_count++; |
| |
| if (ivc->w_pos == (ivc->nframes - (uint32_t)1U)) { |
| ivc->w_pos = 0U; |
| } else { |
| ivc->w_pos++; |
| } |
| } |
| |
| static inline void ivc_advance_rx(struct ivc *ivc) |
| { |
| ivc->rx_channel->r_count++; |
| |
| if (ivc->r_pos == (ivc->nframes - (uint32_t)1U)) { |
| ivc->r_pos = 0U; |
| } else { |
| ivc->r_pos++; |
| } |
| } |
| |
| static inline int32_t ivc_check_read(const struct ivc *ivc) |
| { |
| /* |
| * tx_channel->state is set locally, so it is not synchronized with |
| * state from the remote peer. The remote peer cannot reset its |
| * transmit counters until we've acknowledged its synchronization |
| * request, so no additional synchronization is required because an |
| * asynchronous transition of rx_channel->state to ivc_state_ack is not |
| * allowed. |
| */ |
| if (ivc->tx_channel->state != ivc_state_established) { |
| return -ECONNRESET; |
| } |
| |
| /* |
| * Avoid unnecessary invalidations when performing repeated accesses to |
| * an IVC channel by checking the old queue pointers first. |
| * Synchronization is only necessary when these pointers indicate empty |
| * or full. |
| */ |
| if (!ivc_channel_empty(ivc, ivc->rx_channel)) { |
| return 0; |
| } |
| |
| return ivc_channel_empty(ivc, ivc->rx_channel) ? -ENOMEM : 0; |
| } |
| |
| static inline int32_t ivc_check_write(const struct ivc *ivc) |
| { |
| if (ivc->tx_channel->state != ivc_state_established) { |
| return -ECONNRESET; |
| } |
| |
| if (!ivc_channel_full(ivc, ivc->tx_channel)) { |
| return 0; |
| } |
| |
| return ivc_channel_full(ivc, ivc->tx_channel) ? -ENOMEM : 0; |
| } |
| |
| bool tegra_ivc_can_read(const struct ivc *ivc) |
| { |
| return ivc_check_read(ivc) == 0; |
| } |
| |
| bool tegra_ivc_can_write(const struct ivc *ivc) |
| { |
| return ivc_check_write(ivc) == 0; |
| } |
| |
| bool tegra_ivc_tx_empty(const struct ivc *ivc) |
| { |
| return ivc_channel_empty(ivc, ivc->tx_channel); |
| } |
| |
| static inline uintptr_t calc_frame_offset(uint32_t frame_index, |
| uint32_t frame_size, uint32_t frame_offset) |
| { |
| return ((uintptr_t)frame_index * (uintptr_t)frame_size) + |
| (uintptr_t)frame_offset; |
| } |
| |
| static void *ivc_frame_pointer(const struct ivc *ivc, |
| volatile const struct ivc_channel_header *ch, |
| uint32_t frame) |
| { |
| assert(frame < ivc->nframes); |
| return (void *)((uintptr_t)(&ch[1]) + |
| calc_frame_offset(frame, ivc->frame_size, 0)); |
| } |
| |
| int32_t tegra_ivc_read(struct ivc *ivc, void *buf, size_t max_read) |
| { |
| const void *src; |
| int32_t result; |
| |
| if (buf == NULL) { |
| return -EINVAL; |
| } |
| |
| if (max_read > ivc->frame_size) { |
| return -E2BIG; |
| } |
| |
| result = ivc_check_read(ivc); |
| if (result != 0) { |
| return result; |
| } |
| |
| /* |
| * Order observation of w_pos potentially indicating new data before |
| * data read. |
| */ |
| dmbish(); |
| |
| src = ivc_frame_pointer(ivc, ivc->rx_channel, ivc->r_pos); |
| |
| (void)memcpy(buf, src, max_read); |
| |
| ivc_advance_rx(ivc); |
| |
| /* |
| * Ensure our write to r_pos occurs before our read from w_pos. |
| */ |
| dmbish(); |
| |
| /* |
| * Notify only upon transition from full to non-full. |
| * The available count can only asynchronously increase, so the |
| * worst possible side-effect will be a spurious notification. |
| */ |
| if (ivc_channel_avail_count(ivc, ivc->rx_channel) == (ivc->nframes - (uint32_t)1U)) { |
| ivc->notify(ivc); |
| } |
| |
| return (int32_t)max_read; |
| } |
| |
| /* directly peek at the next frame rx'ed */ |
| void *tegra_ivc_read_get_next_frame(const struct ivc *ivc) |
| { |
| if (ivc_check_read(ivc) != 0) { |
| return NULL; |
| } |
| |
| /* |
| * Order observation of w_pos potentially indicating new data before |
| * data read. |
| */ |
| dmbld(); |
| |
| return ivc_frame_pointer(ivc, ivc->rx_channel, ivc->r_pos); |
| } |
| |
| int32_t tegra_ivc_read_advance(struct ivc *ivc) |
| { |
| /* |
| * No read barriers or synchronization here: the caller is expected to |
| * have already observed the channel non-empty. This check is just to |
| * catch programming errors. |
| */ |
| int32_t result = ivc_check_read(ivc); |
| if (result != 0) { |
| return result; |
| } |
| |
| ivc_advance_rx(ivc); |
| |
| /* |
| * Ensure our write to r_pos occurs before our read from w_pos. |
| */ |
| dmbish(); |
| |
| /* |
| * Notify only upon transition from full to non-full. |
| * The available count can only asynchronously increase, so the |
| * worst possible side-effect will be a spurious notification. |
| */ |
| if (ivc_channel_avail_count(ivc, ivc->rx_channel) == (ivc->nframes - (uint32_t)1U)) { |
| ivc->notify(ivc); |
| } |
| |
| return 0; |
| } |
| |
| int32_t tegra_ivc_write(struct ivc *ivc, const void *buf, size_t size) |
| { |
| void *p; |
| int32_t result; |
| |
| if ((buf == NULL) || (ivc == NULL)) { |
| return -EINVAL; |
| } |
| |
| if (size > ivc->frame_size) { |
| return -E2BIG; |
| } |
| |
| result = ivc_check_write(ivc); |
| if (result != 0) { |
| return result; |
| } |
| |
| p = ivc_frame_pointer(ivc, ivc->tx_channel, ivc->w_pos); |
| |
| (void)memset(p, 0, ivc->frame_size); |
| (void)memcpy(p, buf, size); |
| |
| /* |
| * Ensure that updated data is visible before the w_pos counter |
| * indicates that it is ready. |
| */ |
| dmbst(); |
| |
| ivc_advance_tx(ivc); |
| |
| /* |
| * Ensure our write to w_pos occurs before our read from r_pos. |
| */ |
| dmbish(); |
| |
| /* |
| * Notify only upon transition from empty to non-empty. |
| * The available count can only asynchronously decrease, so the |
| * worst possible side-effect will be a spurious notification. |
| */ |
| if (ivc_channel_avail_count(ivc, ivc->tx_channel) == 1U) { |
| ivc->notify(ivc); |
| } |
| |
| return (int32_t)size; |
| } |
| |
| /* directly poke at the next frame to be tx'ed */ |
| void *tegra_ivc_write_get_next_frame(const struct ivc *ivc) |
| { |
| if (ivc_check_write(ivc) != 0) { |
| return NULL; |
| } |
| |
| return ivc_frame_pointer(ivc, ivc->tx_channel, ivc->w_pos); |
| } |
| |
| /* advance the tx buffer */ |
| int32_t tegra_ivc_write_advance(struct ivc *ivc) |
| { |
| int32_t result = ivc_check_write(ivc); |
| |
| if (result != 0) { |
| return result; |
| } |
| |
| /* |
| * Order any possible stores to the frame before update of w_pos. |
| */ |
| dmbst(); |
| |
| ivc_advance_tx(ivc); |
| |
| /* |
| * Ensure our write to w_pos occurs before our read from r_pos. |
| */ |
| dmbish(); |
| |
| /* |
| * Notify only upon transition from empty to non-empty. |
| * The available count can only asynchronously decrease, so the |
| * worst possible side-effect will be a spurious notification. |
| */ |
| if (ivc_channel_avail_count(ivc, ivc->tx_channel) == (uint32_t)1U) { |
| ivc->notify(ivc); |
| } |
| |
| return 0; |
| } |
| |
| void tegra_ivc_channel_reset(const struct ivc *ivc) |
| { |
| ivc->tx_channel->state = ivc_state_sync; |
| ivc->notify(ivc); |
| } |
| |
| /* |
| * =============================================================== |
| * IVC State Transition Table - see tegra_ivc_channel_notified() |
| * =============================================================== |
| * |
| * local remote action |
| * ----- ------ ----------------------------------- |
| * SYNC EST <none> |
| * SYNC ACK reset counters; move to EST; notify |
| * SYNC SYNC reset counters; move to ACK; notify |
| * ACK EST move to EST; notify |
| * ACK ACK move to EST; notify |
| * ACK SYNC reset counters; move to ACK; notify |
| * EST EST <none> |
| * EST ACK <none> |
| * EST SYNC reset counters; move to ACK; notify |
| * |
| * =============================================================== |
| */ |
| int32_t tegra_ivc_channel_notified(struct ivc *ivc) |
| { |
| uint32_t peer_state; |
| |
| /* Copy the receiver's state out of shared memory. */ |
| peer_state = ivc->rx_channel->state; |
| |
| if (peer_state == (uint32_t)ivc_state_sync) { |
| /* |
| * Order observation of ivc_state_sync before stores clearing |
| * tx_channel. |
| */ |
| dmbld(); |
| |
| /* |
| * Reset tx_channel counters. The remote end is in the SYNC |
| * state and won't make progress until we change our state, |
| * so the counters are not in use at this time. |
| */ |
| ivc->tx_channel->w_count = 0U; |
| ivc->rx_channel->r_count = 0U; |
| |
| ivc->w_pos = 0U; |
| ivc->r_pos = 0U; |
| |
| /* |
| * Ensure that counters appear cleared before new state can be |
| * observed. |
| */ |
| dmbst(); |
| |
| /* |
| * Move to ACK state. We have just cleared our counters, so it |
| * is now safe for the remote end to start using these values. |
| */ |
| ivc->tx_channel->state = ivc_state_ack; |
| |
| /* |
| * Notify remote end to observe state transition. |
| */ |
| ivc->notify(ivc); |
| |
| } else if ((ivc->tx_channel->state == (uint32_t)ivc_state_sync) && |
| (peer_state == (uint32_t)ivc_state_ack)) { |
| /* |
| * Order observation of ivc_state_sync before stores clearing |
| * tx_channel. |
| */ |
| dmbld(); |
| |
| /* |
| * Reset tx_channel counters. The remote end is in the ACK |
| * state and won't make progress until we change our state, |
| * so the counters are not in use at this time. |
| */ |
| ivc->tx_channel->w_count = 0U; |
| ivc->rx_channel->r_count = 0U; |
| |
| ivc->w_pos = 0U; |
| ivc->r_pos = 0U; |
| |
| /* |
| * Ensure that counters appear cleared before new state can be |
| * observed. |
| */ |
| dmbst(); |
| |
| /* |
| * Move to ESTABLISHED state. We know that the remote end has |
| * already cleared its counters, so it is safe to start |
| * writing/reading on this channel. |
| */ |
| ivc->tx_channel->state = ivc_state_established; |
| |
| /* |
| * Notify remote end to observe state transition. |
| */ |
| ivc->notify(ivc); |
| |
| } else if (ivc->tx_channel->state == (uint32_t)ivc_state_ack) { |
| /* |
| * At this point, we have observed the peer to be in either |
| * the ACK or ESTABLISHED state. Next, order observation of |
| * peer state before storing to tx_channel. |
| */ |
| dmbld(); |
| |
| /* |
| * Move to ESTABLISHED state. We know that we have previously |
| * cleared our counters, and we know that the remote end has |
| * cleared its counters, so it is safe to start writing/reading |
| * on this channel. |
| */ |
| ivc->tx_channel->state = ivc_state_established; |
| |
| /* |
| * Notify remote end to observe state transition. |
| */ |
| ivc->notify(ivc); |
| |
| } else { |
| /* |
| * There is no need to handle any further action. Either the |
| * channel is already fully established, or we are waiting for |
| * the remote end to catch up with our current state. Refer |
| * to the diagram in "IVC State Transition Table" above. |
| */ |
| } |
| |
| return ((ivc->tx_channel->state == (uint32_t)ivc_state_established) ? 0 : -EAGAIN); |
| } |
| |
| size_t tegra_ivc_align(size_t size) |
| { |
| return (size + (IVC_ALIGN - 1U)) & ~(IVC_ALIGN - 1U); |
| } |
| |
| size_t tegra_ivc_total_queue_size(size_t queue_size) |
| { |
| if ((queue_size & (IVC_ALIGN - 1U)) != 0U) { |
| ERROR("queue_size (%d) must be %d-byte aligned\n", |
| (int32_t)queue_size, IVC_ALIGN); |
| return 0; |
| } |
| return queue_size + sizeof(struct ivc_channel_header); |
| } |
| |
| static int32_t check_ivc_params(uintptr_t queue_base1, uintptr_t queue_base2, |
| uint32_t nframes, uint32_t frame_size) |
| { |
| assert((offsetof(struct ivc_channel_header, w_count) |
| & (IVC_ALIGN - 1U)) == 0U); |
| assert((offsetof(struct ivc_channel_header, r_count) |
| & (IVC_ALIGN - 1U)) == 0U); |
| assert((sizeof(struct ivc_channel_header) & (IVC_ALIGN - 1U)) == 0U); |
| |
| if (((uint64_t)nframes * (uint64_t)frame_size) >= 0x100000000ULL) { |
| ERROR("nframes * frame_size overflows\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * The headers must at least be aligned enough for counters |
| * to be accessed atomically. |
| */ |
| if ((queue_base1 & (IVC_ALIGN - 1U)) != 0U) { |
| ERROR("ivc channel start not aligned: %lx\n", queue_base1); |
| return -EINVAL; |
| } |
| if ((queue_base2 & (IVC_ALIGN - 1U)) != 0U) { |
| ERROR("ivc channel start not aligned: %lx\n", queue_base2); |
| return -EINVAL; |
| } |
| |
| if ((frame_size & (IVC_ALIGN - 1U)) != 0U) { |
| ERROR("frame size not adequately aligned: %u\n", |
| frame_size); |
| return -EINVAL; |
| } |
| |
| if (queue_base1 < queue_base2) { |
| if ((queue_base1 + ((uint64_t)frame_size * nframes)) > queue_base2) { |
| ERROR("queue regions overlap: %lx + %x, %x\n", |
| queue_base1, frame_size, |
| frame_size * nframes); |
| return -EINVAL; |
| } |
| } else { |
| if ((queue_base2 + ((uint64_t)frame_size * nframes)) > queue_base1) { |
| ERROR("queue regions overlap: %lx + %x, %x\n", |
| queue_base2, frame_size, |
| frame_size * nframes); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int32_t tegra_ivc_init(struct ivc *ivc, uintptr_t rx_base, uintptr_t tx_base, |
| uint32_t nframes, uint32_t frame_size, |
| ivc_notify_function notify) |
| { |
| int32_t result; |
| |
| /* sanity check input params */ |
| if ((ivc == NULL) || (notify == NULL)) { |
| return -EINVAL; |
| } |
| |
| result = check_ivc_params(rx_base, tx_base, nframes, frame_size); |
| if (result != 0) { |
| return result; |
| } |
| |
| /* |
| * All sizes that can be returned by communication functions should |
| * fit in a 32-bit integer. |
| */ |
| if (frame_size > (1u << 31)) { |
| return -E2BIG; |
| } |
| |
| ivc->rx_channel = (struct ivc_channel_header *)rx_base; |
| ivc->tx_channel = (struct ivc_channel_header *)tx_base; |
| ivc->notify = notify; |
| ivc->frame_size = frame_size; |
| ivc->nframes = nframes; |
| ivc->w_pos = 0U; |
| ivc->r_pos = 0U; |
| |
| INFO("%s: done\n", __func__); |
| |
| return 0; |
| } |