| /* |
| * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| /*! |
| * Header file containing the public API for the System Controller (SC) |
| * Pad Control (PAD) function. |
| * |
| * @addtogroup PAD_SVC (SVC) Pad Service |
| * |
| * Module for the Pad Control (PAD) service. |
| * |
| * @details |
| * |
| * Pad configuration is managed by SC firmware. The pad configuration |
| * features supported by the SC firmware include: |
| * |
| * - Configuring the mux, input/output connection, and low-power isolation |
| mode. |
| * - Configuring the technology-specific pad setting such as drive strength, |
| * pullup/pulldown, etc. |
| * - Configuring compensation for pad groups with dual voltage capability. |
| * |
| * Pad functions fall into one of three categories. Generic functions are |
| * common to all SoCs and all process technologies. SoC functions are raw |
| * low-level functions. Technology-specific functions are specific to the |
| * process technology. |
| * |
| * The list of pads is SoC specific. Refer to the SoC [Pad List](@ref PADS) |
| * for valid pad values. Note that all pads exist on a die but may or |
| * may not be brought out by the specific package. Mapping of pads to |
| * package pins/balls is documented in the associated Data Sheet. Some pads |
| * may not be brought out because the part (die+package) is defeatured and |
| * some pads may connect to the substrate in the package. |
| * |
| * Some pads (SC_P_COMP_*) that can be specified are not individual pads |
| * but are in fact pad groups. These groups have additional configuration |
| * that can be done using the sc_pad_set_gp_28fdsoi_comp() function. More |
| * info on these can be found in the associated Reference Manual. |
| * |
| * Pads are managed as a resource by the Resource Manager (RM). They have |
| * assigned owners and only the owners can configure the pads. Some of the |
| * pads are reserved for use by the SCFW itself and this can be overriden |
| * with the implementation of board_config_sc(). Additionally, pads may |
| * be assigned to various other partitions via the implementation of |
| * board_system_config(). |
| * |
| * Note muxing two input pads to the same IP functional signal will |
| * result in undefined behavior. |
| * @{ |
| */ |
| |
| #ifndef SCI_PAD_API_H |
| #define SCI_PAD_API_H |
| |
| /* Includes */ |
| |
| #include <sci/sci_types.h> |
| #include <sci/svc/rm/sci_rm_api.h> |
| |
| /* Defines */ |
| |
| /*! |
| * @name Defines for type widths |
| */ |
| /*@{*/ |
| #define SC_PAD_MUX_W 3 /* Width of mux parameter */ |
| /*@}*/ |
| |
| /*! |
| * @name Defines for sc_pad_config_t |
| */ |
| /*@{*/ |
| #define SC_PAD_CONFIG_NORMAL 0U /* Normal */ |
| #define SC_PAD_CONFIG_OD 1U /* Open Drain */ |
| #define SC_PAD_CONFIG_OD_IN 2U /* Open Drain and input */ |
| #define SC_PAD_CONFIG_OUT_IN 3U /* Output and input */ |
| /*@}*/ |
| |
| /*! |
| * @name Defines for sc_pad_iso_t |
| */ |
| /*@{*/ |
| #define SC_PAD_ISO_OFF 0U /* ISO latch is transparent */ |
| #define SC_PAD_ISO_EARLY 1U /* Follow EARLY_ISO */ |
| #define SC_PAD_ISO_LATE 2U /* Follow LATE_ISO */ |
| #define SC_PAD_ISO_ON 3U /* ISO latched data is held */ |
| /*@}*/ |
| |
| /*! |
| * @name Defines for sc_pad_28fdsoi_dse_t |
| */ |
| /*@{*/ |
| #define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_HS 7U /* High-speed drive strength for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_33V_12MA 3U /* Drive strength of 12mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_DV_HIGH 0U /* High drive strength for dual volt */ |
| #define SC_PAD_28FDSOI_DSE_DV_LOW 1U /* Low drive strength for dual volt */ |
| /*@}*/ |
| |
| /*! |
| * @name Defines for sc_pad_28fdsoi_ps_t |
| */ |
| /*@{*/ |
| #define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */ |
| #define SC_PAD_28FDSOI_PS_PU 1U /* Pull-up */ |
| #define SC_PAD_28FDSOI_PS_PD 2U /* Pull-down */ |
| #define SC_PAD_28FDSOI_PS_NONE 3U /* No pull (disabled) */ |
| /*@}*/ |
| |
| /*! |
| * @name Defines for sc_pad_28fdsoi_pus_t |
| */ |
| /*@{*/ |
| #define SC_PAD_28FDSOI_PUS_30K_PD 0U /* 30K pull-down */ |
| #define SC_PAD_28FDSOI_PUS_100K_PU 1U /* 100K pull-up */ |
| #define SC_PAD_28FDSOI_PUS_3K_PU 2U /* 3K pull-up */ |
| #define SC_PAD_28FDSOI_PUS_30K_PU 3U /* 30K pull-up */ |
| /*@}*/ |
| |
| /*! |
| * @name Defines for sc_pad_wakeup_t |
| */ |
| /*@{*/ |
| #define SC_PAD_WAKEUP_OFF 0U /* Off */ |
| #define SC_PAD_WAKEUP_CLEAR 1U /* Clears pending flag */ |
| #define SC_PAD_WAKEUP_LOW_LVL 4U /* Low level */ |
| #define SC_PAD_WAKEUP_FALL_EDGE 5U /* Falling edge */ |
| #define SC_PAD_WAKEUP_RISE_EDGE 6U /* Rising edge */ |
| #define SC_PAD_WAKEUP_HIGH_LVL 7U /* High-level */ |
| /*@}*/ |
| |
| /* Types */ |
| |
| /*! |
| * This type is used to declare a pad config. It determines how the |
| * output data is driven, pull-up is controlled, and input signal is |
| * connected. Normal and OD are typical and only connect the input |
| * when the output is not driven. The IN options are less common and |
| * force an input connection even when driving the output. |
| */ |
| typedef uint8_t sc_pad_config_t; |
| |
| /*! |
| * This type is used to declare a pad low-power isolation config. |
| * ISO_LATE is the most common setting. ISO_EARLY is only used when |
| * an output pad is directly determined by another input pad. The |
| * other two are only used when SW wants to directly contol isolation. |
| */ |
| typedef uint8_t sc_pad_iso_t; |
| |
| /*! |
| * This type is used to declare a drive strength. Note it is specific |
| * to 28FDSOI. Also note that valid values depend on the pad type. |
| */ |
| typedef uint8_t sc_pad_28fdsoi_dse_t; |
| |
| /*! |
| * This type is used to declare a pull select. Note it is specific |
| * to 28FDSOI. |
| */ |
| typedef uint8_t sc_pad_28fdsoi_ps_t; |
| |
| /*! |
| * This type is used to declare a pull-up select. Note it is specific |
| * to 28FDSOI HSIC pads. |
| */ |
| typedef uint8_t sc_pad_28fdsoi_pus_t; |
| |
| /*! |
| * This type is used to declare a wakeup mode of a pad. |
| */ |
| typedef uint8_t sc_pad_wakeup_t; |
| |
| /* Functions */ |
| |
| /*! |
| * @name Generic Functions |
| * @{ |
| */ |
| |
| /*! |
| * This function configures the mux settings for a pad. This includes |
| * the signal mux, pad config, and low-power isolation mode. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] mux mux setting |
| * @param[in] config pad config |
| * @param[in] iso low-power isolation mode |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Note muxing two input pads to the same IP functional signal will |
| * result in undefined behavior. |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_set_mux(sc_ipc_t ipc, sc_pad_t pad, |
| uint8_t mux, sc_pad_config_t config, sc_pad_iso_t iso); |
| |
| /*! |
| * This function gets the mux settings for a pad. This includes |
| * the signal mux, pad config, and low-power isolation mode. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] mux pointer to return mux setting |
| * @param[out] config pointer to return pad config |
| * @param[out] iso pointer to return low-power isolation mode |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get_mux(sc_ipc_t ipc, sc_pad_t pad, |
| uint8_t *mux, sc_pad_config_t *config, |
| sc_pad_iso_t *iso); |
| |
| /*! |
| * This function configures the general purpose pad control. This |
| * is technology dependent and includes things like drive strength, |
| * slew rate, pull up/down, etc. Refer to the SoC Reference Manual |
| * for bit field details. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] ctrl control value to set |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_set_gp(sc_ipc_t ipc, sc_pad_t pad, uint32_t ctrl); |
| |
| /*! |
| * This function gets the general purpose pad control. This |
| * is technology dependent and includes things like drive strength, |
| * slew rate, pull up/down, etc. Refer to the SoC Reference Manual |
| * for bit field details. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] ctrl pointer to return control value |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get_gp(sc_ipc_t ipc, sc_pad_t pad, uint32_t *ctrl); |
| |
| /*! |
| * This function configures the wakeup mode of the pad. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] wakeup wakeup to set |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_set_wakeup(sc_ipc_t ipc, sc_pad_t pad, sc_pad_wakeup_t wakeup); |
| |
| /*! |
| * This function gets the wakeup mode of a pad. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] wakeup pointer to return wakeup |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get_wakeup(sc_ipc_t ipc, sc_pad_t pad, sc_pad_wakeup_t *wakeup); |
| |
| /*! |
| * This function configures a pad. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] mux mux setting |
| * @param[in] config pad config |
| * @param[in] iso low-power isolation mode |
| * @param[in] ctrl control value |
| * @param[in] wakeup wakeup to set |
| * |
| * @see sc_pad_set_mux(). |
| * @see sc_pad_set_gp(). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Note muxing two input pads to the same IP functional signal will |
| * result in undefined behavior. |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_set_all(sc_ipc_t ipc, sc_pad_t pad, uint8_t mux, |
| sc_pad_config_t config, sc_pad_iso_t iso, uint32_t ctrl, |
| sc_pad_wakeup_t wakeup); |
| |
| /*! |
| * This function gets a pad's config. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] mux pointer to return mux setting |
| * @param[out] config pointer to return pad config |
| * @param[out] iso pointer to return low-power isolation mode |
| * @param[out] ctrl pointer to return control value |
| * @param[out] wakeup pointer to return wakeup to set |
| * |
| * @see sc_pad_set_mux(). |
| * @see sc_pad_set_gp(). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get_all(sc_ipc_t ipc, sc_pad_t pad, uint8_t *mux, |
| sc_pad_config_t *config, sc_pad_iso_t *iso, |
| uint32_t *ctrl, sc_pad_wakeup_t *wakeup); |
| |
| /* @} */ |
| |
| /*! |
| * @name SoC Specific Functions |
| * @{ |
| */ |
| |
| /*! |
| * This function configures the settings for a pad. This setting is SoC |
| * specific. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] val value to set |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, uint32_t val); |
| |
| /*! |
| * This function gets the settings for a pad. This setting is SoC |
| * specific. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] val pointer to return setting |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get(sc_ipc_t ipc, sc_pad_t pad, uint32_t *val); |
| |
| /* @} */ |
| |
| /*! |
| * @name Technology Specific Functions |
| * @{ |
| */ |
| |
| /*! |
| * This function configures the pad control specific to 28FDSOI. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] dse drive strength |
| * @param[in] ps pull select |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner, |
| * - SC_ERR_UNAVAILABLE if process not applicable |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_set_gp_28fdsoi(sc_ipc_t ipc, sc_pad_t pad, |
| sc_pad_28fdsoi_dse_t dse, |
| sc_pad_28fdsoi_ps_t ps); |
| |
| /*! |
| * This function gets the pad control specific to 28FDSOI. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] dse pointer to return drive strength |
| * @param[out] ps pointer to return pull select |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner, |
| * - SC_ERR_UNAVAILABLE if process not applicable |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get_gp_28fdsoi(sc_ipc_t ipc, sc_pad_t pad, |
| sc_pad_28fdsoi_dse_t *dse, |
| sc_pad_28fdsoi_ps_t *ps); |
| |
| /*! |
| * This function configures the pad control specific to 28FDSOI. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] dse drive strength |
| * @param[in] hys hysteresis |
| * @param[in] pus pull-up select |
| * @param[in] pke pull keeper enable |
| * @param[in] pue pull-up enable |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner, |
| * - SC_ERR_UNAVAILABLE if process not applicable |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_set_gp_28fdsoi_hsic(sc_ipc_t ipc, sc_pad_t pad, |
| sc_pad_28fdsoi_dse_t dse, sc_bool_t hys, |
| sc_pad_28fdsoi_pus_t pus, sc_bool_t pke, |
| sc_bool_t pue); |
| |
| /*! |
| * This function gets the pad control specific to 28FDSOI. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] dse pointer to return drive strength |
| * @param[out] hys pointer to return hysteresis |
| * @param[out] pus pointer to return pull-up select |
| * @param[out] pke pointer to return pull keeper enable |
| * @param[out] pue pointer to return pull-up enable |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner, |
| * - SC_ERR_UNAVAILABLE if process not applicable |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get_gp_28fdsoi_hsic(sc_ipc_t ipc, sc_pad_t pad, |
| sc_pad_28fdsoi_dse_t *dse, sc_bool_t *hys, |
| sc_pad_28fdsoi_pus_t *pus, sc_bool_t *pke, |
| sc_bool_t *pue); |
| |
| /*! |
| * This function configures the compensation control specific to 28FDSOI. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to configure |
| * @param[in] compen compensation/freeze mode |
| * @param[in] fastfrz fast freeze |
| * @param[in] rasrcp compensation code for PMOS |
| * @param[in] rasrcn compensation code for NMOS |
| * @param[in] nasrc_sel NASRC read select |
| * @param[in] psw_ovr 2.5v override |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner, |
| * - SC_ERR_UNAVAILABLE if process not applicable |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| * |
| * Note \a psw_ovr is only applicable to pads supporting 2.5 volt |
| * operation (e.g. some Ethernet pads). |
| */ |
| sc_err_t sc_pad_set_gp_28fdsoi_comp(sc_ipc_t ipc, sc_pad_t pad, |
| uint8_t compen, sc_bool_t fastfrz, |
| uint8_t rasrcp, uint8_t rasrcn, |
| sc_bool_t nasrc_sel, sc_bool_t psw_ovr); |
| |
| /*! |
| * This function gets the compensation control specific to 28FDSOI. |
| * |
| * @param[in] ipc IPC handle |
| * @param[in] pad pad to query |
| * @param[out] compen pointer to return compensation/freeze mode |
| * @param[out] fastfrz pointer to return fast freeze |
| * @param[out] rasrcp pointer to return compensation code for PMOS |
| * @param[out] rasrcn pointer to return compensation code for NMOS |
| * @param[out] nasrc_sel pointer to return NASRC read select |
| * @param[out] compok pointer to return compensation status |
| * @param[out] nasrc pointer to return NASRCP/NASRCN |
| * @param[out] psw_ovr pointer to return the 2.5v override |
| * |
| * @return Returns an error code (SC_ERR_NONE = success). |
| * |
| * Return errors: |
| * - SC_PARM if arguments out of range or invalid, |
| * - SC_ERR_NOACCESS if caller's partition is not the pad owner, |
| * - SC_ERR_UNAVAILABLE if process not applicable |
| * |
| * Refer to the SoC [Pad List](@ref PADS) for valid pad values. |
| */ |
| sc_err_t sc_pad_get_gp_28fdsoi_comp(sc_ipc_t ipc, sc_pad_t pad, |
| uint8_t *compen, sc_bool_t *fastfrz, |
| uint8_t *rasrcp, uint8_t *rasrcn, |
| sc_bool_t *nasrc_sel, sc_bool_t *compok, |
| uint8_t *nasrc, sc_bool_t *psw_ovr); |
| |
| /* @} */ |
| |
| #endif /* SCI_PAD_API_H */ |
| |
| /**@}*/ |