| /* |
| * Copyright (c) 2015-2023, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef PLAT_ARM_H |
| #define PLAT_ARM_H |
| |
| #include <stdbool.h> |
| #include <stdint.h> |
| |
| #include <drivers/arm/tzc_common.h> |
| #include <lib/bakery_lock.h> |
| #include <lib/cassert.h> |
| #include <lib/el3_runtime/cpu_data.h> |
| #include <lib/spinlock.h> |
| #include <lib/utils_def.h> |
| #include <lib/xlat_tables/xlat_tables_compat.h> |
| |
| /******************************************************************************* |
| * Forward declarations |
| ******************************************************************************/ |
| struct meminfo; |
| struct image_info; |
| struct bl_params; |
| |
| typedef struct arm_tzc_regions_info { |
| unsigned long long base; |
| unsigned long long end; |
| unsigned int sec_attr; |
| unsigned int nsaid_permissions; |
| } arm_tzc_regions_info_t; |
| |
| /******************************************************************************* |
| * Default mapping definition of the TrustZone Controller for ARM standard |
| * platforms. |
| * Configure: |
| * - Region 0 with no access; |
| * - Region 1 with secure access only; |
| * - the remaining DRAM regions access from the given Non-Secure masters. |
| ******************************************************************************/ |
| #if SPM_MM |
| #define ARM_TZC_REGIONS_DEF \ |
| {ARM_AP_TZC_DRAM1_BASE, ARM_EL3_TZC_DRAM1_END + ARM_L1_GPT_SIZE,\ |
| TZC_REGION_S_RDWR, 0}, \ |
| {ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS}, \ |
| {ARM_DRAM2_BASE, ARM_DRAM2_END, ARM_TZC_NS_DRAM_S_ACCESS, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS}, \ |
| {PLAT_SP_IMAGE_NS_BUF_BASE, (PLAT_SP_IMAGE_NS_BUF_BASE + \ |
| PLAT_SP_IMAGE_NS_BUF_SIZE) - 1, TZC_REGION_S_NONE, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS} |
| |
| #elif ENABLE_RME |
| #define ARM_TZC_REGIONS_DEF \ |
| {ARM_AP_TZC_DRAM1_BASE, ARM_AP_TZC_DRAM1_END, TZC_REGION_S_RDWR, 0},\ |
| {ARM_EL3_TZC_DRAM1_BASE, ARM_L1_GPT_END, TZC_REGION_S_RDWR, 0}, \ |
| {ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS}, \ |
| /* Realm and Shared area share the same PAS */ \ |
| {ARM_REALM_BASE, ARM_EL3_RMM_SHARED_END, ARM_TZC_NS_DRAM_S_ACCESS, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS}, \ |
| {ARM_DRAM2_BASE, ARM_DRAM2_END, ARM_TZC_NS_DRAM_S_ACCESS, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS} |
| |
| #else |
| #define ARM_TZC_REGIONS_DEF \ |
| {ARM_AP_TZC_DRAM1_BASE, ARM_EL3_TZC_DRAM1_END + ARM_L1_GPT_SIZE,\ |
| TZC_REGION_S_RDWR, 0}, \ |
| {ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS}, \ |
| {ARM_DRAM2_BASE, ARM_DRAM2_END, ARM_TZC_NS_DRAM_S_ACCESS, \ |
| PLAT_ARM_TZC_NS_DEV_ACCESS} |
| #endif |
| |
| #define ARM_CASSERT_MMAP \ |
| CASSERT((ARRAY_SIZE(plat_arm_mmap) - 1) <= PLAT_ARM_MMAP_ENTRIES, \ |
| assert_plat_arm_mmap_mismatch); \ |
| CASSERT((PLAT_ARM_MMAP_ENTRIES + ARM_BL_REGIONS) \ |
| <= MAX_MMAP_REGIONS, \ |
| assert_max_mmap_regions); |
| |
| void arm_setup_romlib(void); |
| |
| #if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32)) |
| /* |
| * Use this macro to instantiate lock before it is used in below |
| * arm_lock_xxx() macros |
| */ |
| #define ARM_INSTANTIATE_LOCK static DEFINE_BAKERY_LOCK(arm_lock) |
| #define ARM_LOCK_GET_INSTANCE (&arm_lock) |
| |
| #if !HW_ASSISTED_COHERENCY |
| #define ARM_SCMI_INSTANTIATE_LOCK DEFINE_BAKERY_LOCK(arm_scmi_lock) |
| #else |
| #define ARM_SCMI_INSTANTIATE_LOCK spinlock_t arm_scmi_lock |
| #endif |
| #define ARM_SCMI_LOCK_GET_INSTANCE (&arm_scmi_lock) |
| |
| /* |
| * These are wrapper macros to the Coherent Memory Bakery Lock API. |
| */ |
| #define arm_lock_init() bakery_lock_init(&arm_lock) |
| #define arm_lock_get() bakery_lock_get(&arm_lock) |
| #define arm_lock_release() bakery_lock_release(&arm_lock) |
| |
| #else |
| |
| /* |
| * Empty macros for all other BL stages other than BL31 and BL32 |
| */ |
| #define ARM_INSTANTIATE_LOCK static int arm_lock __unused |
| #define ARM_LOCK_GET_INSTANCE 0 |
| #define arm_lock_init() |
| #define arm_lock_get() |
| #define arm_lock_release() |
| |
| #endif /* defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32)) */ |
| |
| #if ARM_RECOM_STATE_ID_ENC |
| /* |
| * Macros used to parse state information from State-ID if it is using the |
| * recommended encoding for State-ID. |
| */ |
| #define ARM_LOCAL_PSTATE_WIDTH 4 |
| #define ARM_LOCAL_PSTATE_MASK ((1 << ARM_LOCAL_PSTATE_WIDTH) - 1) |
| |
| #if PSCI_OS_INIT_MODE |
| #define ARM_LAST_AT_PLVL_MASK (ARM_LOCAL_PSTATE_MASK << \ |
| (ARM_LOCAL_PSTATE_WIDTH * \ |
| (PLAT_MAX_PWR_LVL + 1))) |
| #endif /* __PSCI_OS_INIT_MODE__ */ |
| |
| /* Macros to construct the composite power state */ |
| |
| /* Make composite power state parameter till power level 0 */ |
| #if PSCI_EXTENDED_STATE_ID |
| |
| #define arm_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \ |
| (((lvl0_state) << PSTATE_ID_SHIFT) | ((type) << PSTATE_TYPE_SHIFT)) |
| #else |
| #define arm_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \ |
| (((lvl0_state) << PSTATE_ID_SHIFT) | \ |
| ((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \ |
| ((type) << PSTATE_TYPE_SHIFT)) |
| #endif /* __PSCI_EXTENDED_STATE_ID__ */ |
| |
| /* Make composite power state parameter till power level 1 */ |
| #define arm_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \ |
| (((lvl1_state) << ARM_LOCAL_PSTATE_WIDTH) | \ |
| arm_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type)) |
| |
| /* Make composite power state parameter till power level 2 */ |
| #define arm_make_pwrstate_lvl2(lvl2_state, lvl1_state, lvl0_state, pwr_lvl, type) \ |
| (((lvl2_state) << (ARM_LOCAL_PSTATE_WIDTH * 2)) | \ |
| arm_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type)) |
| |
| #endif /* __ARM_RECOM_STATE_ID_ENC__ */ |
| |
| /* ARM State switch error codes */ |
| #define STATE_SW_E_PARAM (-2) |
| #define STATE_SW_E_DENIED (-3) |
| |
| /* plat_get_rotpk_info() flags */ |
| #define ARM_ROTPK_REGS_ID 1 |
| #define ARM_ROTPK_DEVEL_RSA_ID 2 |
| #define ARM_ROTPK_DEVEL_ECDSA_ID 3 |
| #define ARM_ROTPK_DEVEL_FULL_DEV_RSA_KEY_ID 4 |
| |
| /* IO storage utility functions */ |
| int arm_io_setup(void); |
| |
| /* Set image specification in IO block policy */ |
| int arm_set_image_source(unsigned int image_id, const char *part_name, |
| uintptr_t *dev_handle, uintptr_t *image_spec); |
| void arm_set_fip_addr(uint32_t active_fw_bank_idx); |
| |
| /* Security utility functions */ |
| void arm_tzc400_setup(uintptr_t tzc_base, |
| const arm_tzc_regions_info_t *tzc_regions); |
| struct tzc_dmc500_driver_data; |
| void arm_tzc_dmc500_setup(struct tzc_dmc500_driver_data *plat_driver_data, |
| const arm_tzc_regions_info_t *tzc_regions); |
| |
| /* Console utility functions */ |
| void arm_console_boot_init(void); |
| void arm_console_boot_end(void); |
| void arm_console_runtime_init(void); |
| void arm_console_runtime_end(void); |
| |
| /* Systimer utility function */ |
| void arm_configure_sys_timer(void); |
| |
| /* PM utility functions */ |
| int arm_validate_power_state(unsigned int power_state, |
| psci_power_state_t *req_state); |
| int arm_validate_psci_entrypoint(uintptr_t entrypoint); |
| int arm_validate_ns_entrypoint(uintptr_t entrypoint); |
| void arm_system_pwr_domain_save(void); |
| void arm_system_pwr_domain_resume(void); |
| int arm_psci_read_mem_protect(int *enabled); |
| int arm_nor_psci_write_mem_protect(int val); |
| void arm_nor_psci_do_static_mem_protect(void); |
| void arm_nor_psci_do_dyn_mem_protect(void); |
| int arm_psci_mem_protect_chk(uintptr_t base, u_register_t length); |
| |
| /* Topology utility function */ |
| int arm_check_mpidr(u_register_t mpidr); |
| |
| /* BL1 utility functions */ |
| void arm_bl1_early_platform_setup(void); |
| void arm_bl1_platform_setup(void); |
| void arm_bl1_plat_arch_setup(void); |
| |
| /* BL2 utility functions */ |
| void arm_bl2_early_platform_setup(uintptr_t fw_config, struct meminfo *mem_layout); |
| void arm_bl2_platform_setup(void); |
| void arm_bl2_plat_arch_setup(void); |
| uint32_t arm_get_spsr_for_bl32_entry(void); |
| uint32_t arm_get_spsr_for_bl33_entry(void); |
| int arm_bl2_plat_handle_post_image_load(unsigned int image_id); |
| int arm_bl2_handle_post_image_load(unsigned int image_id); |
| struct bl_params *arm_get_next_bl_params(void); |
| |
| /* BL2 at EL3 functions */ |
| void arm_bl2_el3_early_platform_setup(void); |
| void arm_bl2_el3_plat_arch_setup(void); |
| |
| /* BL2U utility functions */ |
| void arm_bl2u_early_platform_setup(struct meminfo *mem_layout, |
| void *plat_info); |
| void arm_bl2u_platform_setup(void); |
| void arm_bl2u_plat_arch_setup(void); |
| |
| /* BL31 utility functions */ |
| void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config, |
| uintptr_t hw_config, void *plat_params_from_bl2); |
| void arm_bl31_platform_setup(void); |
| void arm_bl31_plat_runtime_setup(void); |
| void arm_bl31_plat_arch_setup(void); |
| |
| /* TSP utility functions */ |
| void arm_tsp_early_platform_setup(void); |
| |
| /* SP_MIN utility functions */ |
| void arm_sp_min_early_platform_setup(void *from_bl2, uintptr_t tos_fw_config, |
| uintptr_t hw_config, void *plat_params_from_bl2); |
| void arm_sp_min_plat_runtime_setup(void); |
| void arm_sp_min_plat_arch_setup(void); |
| |
| /* FIP TOC validity check */ |
| bool arm_io_is_toc_valid(void); |
| |
| /* Utility functions for Dynamic Config */ |
| void arm_bl2_dyn_cfg_init(void); |
| void arm_bl1_set_mbedtls_heap(void); |
| int arm_get_mbedtls_heap(void **heap_addr, size_t *heap_size); |
| |
| #if MEASURED_BOOT |
| int arm_set_tos_fw_info(uintptr_t log_addr, size_t log_size); |
| int arm_set_nt_fw_info( |
| /* |
| * Currently OP-TEE does not support reading DTBs from Secure memory |
| * and this option should be removed when feature is supported. |
| */ |
| #ifdef SPD_opteed |
| uintptr_t log_addr, |
| #endif |
| size_t log_size, uintptr_t *ns_log_addr); |
| int arm_set_tb_fw_info(uintptr_t log_addr, size_t log_size, |
| size_t log_max_size); |
| int arm_get_tb_fw_info(uint64_t *log_addr, size_t *log_size, |
| size_t *log_max_size); |
| #endif /* MEASURED_BOOT */ |
| |
| /* |
| * Free the memory storing initialization code only used during an images boot |
| * time so it can be reclaimed for runtime data |
| */ |
| void arm_free_init_memory(void); |
| |
| /* |
| * Make the higher level translation tables read-only |
| */ |
| void arm_xlat_make_tables_readonly(void); |
| |
| /* |
| * Mandatory functions required in ARM standard platforms |
| */ |
| unsigned int plat_arm_get_cluster_core_count(u_register_t mpidr); |
| void plat_arm_gic_driver_init(void); |
| void plat_arm_gic_init(void); |
| void plat_arm_gic_cpuif_enable(void); |
| void plat_arm_gic_cpuif_disable(void); |
| void plat_arm_gic_redistif_on(void); |
| void plat_arm_gic_redistif_off(void); |
| void plat_arm_gic_pcpu_init(void); |
| void plat_arm_gic_save(void); |
| void plat_arm_gic_resume(void); |
| void plat_arm_security_setup(void); |
| void plat_arm_pwrc_setup(void); |
| void plat_arm_interconnect_init(void); |
| void plat_arm_interconnect_enter_coherency(void); |
| void plat_arm_interconnect_exit_coherency(void); |
| void plat_arm_program_trusted_mailbox(uintptr_t address); |
| bool plat_arm_bl1_fwu_needed(void); |
| __dead2 void plat_arm_error_handler(int err); |
| __dead2 void plat_arm_system_reset(void); |
| |
| /* |
| * Optional functions in ARM standard platforms |
| */ |
| void plat_arm_override_gicr_frames(const uintptr_t *plat_gicr_frames); |
| int arm_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len, |
| unsigned int *flags); |
| int arm_get_rotpk_info_regs(void **key_ptr, unsigned int *key_len, |
| unsigned int *flags); |
| int arm_get_rotpk_info_cc(void **key_ptr, unsigned int *key_len, |
| unsigned int *flags); |
| int arm_get_rotpk_info_dev(void **key_ptr, unsigned int *key_len, |
| unsigned int *flags); |
| |
| #if ARM_PLAT_MT |
| unsigned int plat_arm_get_cpu_pe_count(u_register_t mpidr); |
| #endif |
| |
| /* |
| * This function is called after loading SCP_BL2 image and it is used to perform |
| * any platform-specific actions required to handle the SCP firmware. |
| */ |
| int plat_arm_bl2_handle_scp_bl2(struct image_info *scp_bl2_image_info); |
| |
| /* |
| * Optional functions required in ARM standard platforms |
| */ |
| void plat_arm_io_setup(void); |
| int plat_arm_get_alt_image_source( |
| unsigned int image_id, |
| uintptr_t *dev_handle, |
| uintptr_t *image_spec); |
| unsigned int plat_arm_calc_core_pos(u_register_t mpidr); |
| const mmap_region_t *plat_arm_get_mmap(void); |
| |
| /* Allow platform to override psci_pm_ops during runtime */ |
| const plat_psci_ops_t *plat_arm_psci_override_pm_ops(plat_psci_ops_t *ops); |
| |
| /* Execution state switch in ARM platforms */ |
| int arm_execution_state_switch(unsigned int smc_fid, |
| uint32_t pc_hi, |
| uint32_t pc_lo, |
| uint32_t cookie_hi, |
| uint32_t cookie_lo, |
| void *handle); |
| |
| /* Optional functions for SP_MIN */ |
| void plat_arm_sp_min_early_platform_setup(u_register_t arg0, u_register_t arg1, |
| u_register_t arg2, u_register_t arg3); |
| |
| /* global variables */ |
| extern plat_psci_ops_t plat_arm_psci_pm_ops; |
| extern const mmap_region_t plat_arm_mmap[]; |
| extern const unsigned int arm_pm_idle_states[]; |
| |
| /* secure watchdog */ |
| void plat_arm_secure_wdt_start(void); |
| void plat_arm_secure_wdt_stop(void); |
| void plat_arm_secure_wdt_refresh(void); |
| |
| /* Get SOC-ID of ARM platform */ |
| uint32_t plat_arm_get_soc_id(void); |
| |
| #endif /* PLAT_ARM_H */ |