blob: 6e06b9414c53b7046e0e7972ba466ca995a1136a [file] [log] [blame]
/*
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <platform_def.h>
#include <pmu_regs.h>
.globl clst_warmboot_data
.macro sram_func _name
.cfi_sections .debug_frame
.section .sram.text, "ax"
.type \_name, %function
.func \_name
.cfi_startproc
\_name:
.endm
#define CRU_CLKSEL_CON6 0x118
#define DDRCTL0_C_SYSREQ_CFG 0x0100
#define DDRCTL1_C_SYSREQ_CFG 0x1000
#define DDRC0_SREF_DONE_EXT 0x01
#define DDRC1_SREF_DONE_EXT 0x04
#define PLL_MODE_SHIFT (0x8)
#define PLL_NORMAL_MODE ((0x3 << (PLL_MODE_SHIFT + 16)) | \
(0x1 << PLL_MODE_SHIFT))
#define MPIDR_CLST_L_BITS 0x0
/*
* For different socs, if we want to speed up warmboot,
* we need to config some regs here.
* If scu was suspend, we must resume related clk
* from slow (24M) mode to normal mode first.
* X0: MPIDR_EL1 & MPIDR_CLUSTER_MASK
*/
.macro func_rockchip_clst_warmboot
adr x4, clst_warmboot_data
lsr x5, x0, #6
ldr w3, [x4, x5]
str wzr, [x4, x5]
cmp w3, #PMU_CLST_RET
b.ne clst_warmboot_end
ldr w6, =(PLL_NORMAL_MODE)
/*
* core_l offset is CRU_BASE + 0xc,
* core_b offset is CRU_BASE + 0x2c
*/
ldr x7, =(CRU_BASE + 0xc)
lsr x2, x0, #3
str w6, [x7, x2]
clst_warmboot_end:
.endm
.macro rockchip_clst_warmboot_data
clst_warmboot_data:
.rept PLATFORM_CLUSTER_COUNT
.word 0
.endr
.endm
/* -----------------------------------------------
* void sram_func_set_ddrctl_pll(uint32_t pll_src)
* Function to switch the PLL source for ddrctrl
* In: x0 - The PLL of the clk_ddrc clock source
* out: None
* Clobber list : x0 - x3, x5, x8 - x10
* -----------------------------------------------
*/
.globl sram_func_set_ddrctl_pll
sram_func sram_func_set_ddrctl_pll
/* backup parameter */
mov x8, x0
/* disable the MMU at EL3 */
mrs x9, sctlr_el3
bic x10, x9, #(SCTLR_M_BIT)
msr sctlr_el3, x10
isb
dsb sy
/* enable ddrctl0_1 idle request */
mov x5, PMU_BASE
ldr w0, [x5, #PMU_SFT_CON]
orr w0, w0, #DDRCTL0_C_SYSREQ_CFG
orr w0, w0, #DDRCTL1_C_SYSREQ_CFG
str w0, [x5, #PMU_SFT_CON]
check_ddrc0_1_sref_enter:
ldr w1, [x5, #PMU_DDR_SREF_ST]
and w2, w1, #DDRC0_SREF_DONE_EXT
and w3, w1, #DDRC1_SREF_DONE_EXT
orr w2, w2, w3
cmp w2, #(DDRC0_SREF_DONE_EXT | DDRC1_SREF_DONE_EXT)
b.eq check_ddrc0_1_sref_enter
/*
* select a PLL for ddrctrl:
* x0 = 0: ALPLL
* x0 = 1: ABPLL
* x0 = 2: DPLL
* x0 = 3: GPLLL
*/
mov x5, CRU_BASE
lsl w0, w8, #4
orr w0, w0, #0x00300000
str w0, [x5, #CRU_CLKSEL_CON6]
/* disable ddrctl0_1 idle request */
mov x5, PMU_BASE
ldr w0, [x5, #PMU_SFT_CON]
bic w0, w0, #DDRCTL0_C_SYSREQ_CFG
bic w0, w0, #DDRCTL1_C_SYSREQ_CFG
str w0, [x5, #PMU_SFT_CON]
check_ddrc0_1_sref_exit:
ldr w1, [x5, #PMU_DDR_SREF_ST]
and w2, w1, #DDRC0_SREF_DONE_EXT
and w3, w1, #DDRC1_SREF_DONE_EXT
orr w2, w2, w3
cmp w2, #0x0
b.eq check_ddrc0_1_sref_exit
/* reenable the MMU at EL3 */
msr sctlr_el3, x9
isb
dsb sy
ret
endfunc sram_func_set_ddrctl_pll