| /* |
| * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * Neither the name of ARM nor the names of its contributors may be used |
| * to endorse or promote products derived from this software without specific |
| * prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <arch.h> |
| #include <assert.h> |
| #include <gic_v2.h> |
| #include <interrupt_mgmt.h> |
| #include <mmio.h> |
| |
| /******************************************************************************* |
| * GIC Distributor interface accessors for reading entire registers |
| ******************************************************************************/ |
| |
| unsigned int gicd_read_igroupr(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> IGROUPR_SHIFT; |
| return mmio_read_32(base + GICD_IGROUPR + (n << 2)); |
| } |
| |
| unsigned int gicd_read_isenabler(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ISENABLER_SHIFT; |
| return mmio_read_32(base + GICD_ISENABLER + (n << 2)); |
| } |
| |
| unsigned int gicd_read_icenabler(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ICENABLER_SHIFT; |
| return mmio_read_32(base + GICD_ICENABLER + (n << 2)); |
| } |
| |
| unsigned int gicd_read_ispendr(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ISPENDR_SHIFT; |
| return mmio_read_32(base + GICD_ISPENDR + (n << 2)); |
| } |
| |
| unsigned int gicd_read_icpendr(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ICPENDR_SHIFT; |
| return mmio_read_32(base + GICD_ICPENDR + (n << 2)); |
| } |
| |
| unsigned int gicd_read_isactiver(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ISACTIVER_SHIFT; |
| return mmio_read_32(base + GICD_ISACTIVER + (n << 2)); |
| } |
| |
| unsigned int gicd_read_icactiver(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ICACTIVER_SHIFT; |
| return mmio_read_32(base + GICD_ICACTIVER + (n << 2)); |
| } |
| |
| unsigned int gicd_read_ipriorityr(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> IPRIORITYR_SHIFT; |
| return mmio_read_32(base + GICD_IPRIORITYR + (n << 2)); |
| } |
| |
| unsigned int gicd_read_itargetsr(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ITARGETSR_SHIFT; |
| return mmio_read_32(base + GICD_ITARGETSR + (n << 2)); |
| } |
| |
| unsigned int gicd_read_icfgr(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> ICFGR_SHIFT; |
| return mmio_read_32(base + GICD_ICFGR + (n << 2)); |
| } |
| |
| unsigned int gicd_read_cpendsgir(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> CPENDSGIR_SHIFT; |
| return mmio_read_32(base + GICD_CPENDSGIR + (n << 2)); |
| } |
| |
| unsigned int gicd_read_spendsgir(uintptr_t base, unsigned int id) |
| { |
| unsigned n = id >> SPENDSGIR_SHIFT; |
| return mmio_read_32(base + GICD_SPENDSGIR + (n << 2)); |
| } |
| |
| /******************************************************************************* |
| * GIC Distributor interface accessors for writing entire registers |
| ******************************************************************************/ |
| |
| void gicd_write_igroupr(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> IGROUPR_SHIFT; |
| mmio_write_32(base + GICD_IGROUPR + (n << 2), val); |
| } |
| |
| void gicd_write_isenabler(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ISENABLER_SHIFT; |
| mmio_write_32(base + GICD_ISENABLER + (n << 2), val); |
| } |
| |
| void gicd_write_icenabler(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ICENABLER_SHIFT; |
| mmio_write_32(base + GICD_ICENABLER + (n << 2), val); |
| } |
| |
| void gicd_write_ispendr(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ISPENDR_SHIFT; |
| mmio_write_32(base + GICD_ISPENDR + (n << 2), val); |
| } |
| |
| void gicd_write_icpendr(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ICPENDR_SHIFT; |
| mmio_write_32(base + GICD_ICPENDR + (n << 2), val); |
| } |
| |
| void gicd_write_isactiver(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ISACTIVER_SHIFT; |
| mmio_write_32(base + GICD_ISACTIVER + (n << 2), val); |
| } |
| |
| void gicd_write_icactiver(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ICACTIVER_SHIFT; |
| mmio_write_32(base + GICD_ICACTIVER + (n << 2), val); |
| } |
| |
| void gicd_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> IPRIORITYR_SHIFT; |
| mmio_write_32(base + GICD_IPRIORITYR + (n << 2), val); |
| } |
| |
| void gicd_write_itargetsr(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ITARGETSR_SHIFT; |
| mmio_write_32(base + GICD_ITARGETSR + (n << 2), val); |
| } |
| |
| void gicd_write_icfgr(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> ICFGR_SHIFT; |
| mmio_write_32(base + GICD_ICFGR + (n << 2), val); |
| } |
| |
| void gicd_write_cpendsgir(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> CPENDSGIR_SHIFT; |
| mmio_write_32(base + GICD_CPENDSGIR + (n << 2), val); |
| } |
| |
| void gicd_write_spendsgir(uintptr_t base, unsigned int id, unsigned int val) |
| { |
| unsigned n = id >> SPENDSGIR_SHIFT; |
| mmio_write_32(base + GICD_SPENDSGIR + (n << 2), val); |
| } |
| |
| /******************************************************************************* |
| * GIC Distributor interface accessors for individual interrupt manipulation |
| ******************************************************************************/ |
| unsigned int gicd_get_igroupr(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1); |
| unsigned int reg_val = gicd_read_igroupr(base, id); |
| |
| return (reg_val >> bit_num) & 0x1; |
| } |
| |
| void gicd_set_igroupr(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1); |
| unsigned int reg_val = gicd_read_igroupr(base, id); |
| |
| gicd_write_igroupr(base, id, reg_val | (1 << bit_num)); |
| } |
| |
| void gicd_clr_igroupr(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1); |
| unsigned int reg_val = gicd_read_igroupr(base, id); |
| |
| gicd_write_igroupr(base, id, reg_val & ~(1 << bit_num)); |
| } |
| |
| void gicd_set_isenabler(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << ISENABLER_SHIFT) - 1); |
| |
| gicd_write_isenabler(base, id, (1 << bit_num)); |
| } |
| |
| void gicd_set_icenabler(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << ICENABLER_SHIFT) - 1); |
| |
| gicd_write_icenabler(base, id, (1 << bit_num)); |
| } |
| |
| void gicd_set_ispendr(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << ISPENDR_SHIFT) - 1); |
| |
| gicd_write_ispendr(base, id, (1 << bit_num)); |
| } |
| |
| void gicd_set_icpendr(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << ICPENDR_SHIFT) - 1); |
| |
| gicd_write_icpendr(base, id, (1 << bit_num)); |
| } |
| |
| void gicd_set_isactiver(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << ISACTIVER_SHIFT) - 1); |
| |
| gicd_write_isactiver(base, id, (1 << bit_num)); |
| } |
| |
| void gicd_set_icactiver(uintptr_t base, unsigned int id) |
| { |
| unsigned bit_num = id & ((1 << ICACTIVER_SHIFT) - 1); |
| |
| gicd_write_icactiver(base, id, (1 << bit_num)); |
| } |
| |
| /* |
| * Make sure that the interrupt's group is set before expecting |
| * this function to do its job correctly. |
| */ |
| void gicd_set_ipriorityr(uintptr_t base, unsigned int id, unsigned int pri) |
| { |
| unsigned int reg = base + GICD_IPRIORITYR + (id & ~3); |
| unsigned int shift = (id & 3) << 3; |
| unsigned int reg_val = mmio_read_32(reg); |
| |
| /* |
| * Enforce ARM recommendation to manage priority values such |
| * that group1 interrupts always have a lower priority than |
| * group0 interrupts. |
| * Note, lower numerical values are higher priorities so the comparison |
| * checks below are reversed from what might be expected. |
| */ |
| assert(gicd_get_igroupr(base, id) == GRP1 ? |
| pri >= GIC_HIGHEST_NS_PRIORITY && |
| pri <= GIC_LOWEST_NS_PRIORITY : |
| pri >= GIC_HIGHEST_SEC_PRIORITY && |
| pri <= GIC_LOWEST_SEC_PRIORITY); |
| |
| reg_val &= ~(GIC_PRI_MASK << shift); |
| reg_val |= (pri & GIC_PRI_MASK) << shift; |
| mmio_write_32(reg, reg_val); |
| } |
| |
| void gicd_set_itargetsr(uintptr_t base, unsigned int id, unsigned int target) |
| { |
| unsigned byte_off = id & ((1 << ITARGETSR_SHIFT) - 1); |
| unsigned int reg_val = gicd_read_itargetsr(base, id); |
| |
| gicd_write_itargetsr(base, id, reg_val | (target << (byte_off << 3))); |
| } |
| |
| /******************************************************************************* |
| * This function allows the interrupt management framework to determine (through |
| * the platform) which interrupt line (IRQ/FIQ) to use for an interrupt type to |
| * route it to EL3. The interrupt line is represented as the bit position of the |
| * IRQ or FIQ bit in the SCR_EL3. |
| ******************************************************************************/ |
| uint32_t gicv2_interrupt_type_to_line(uint32_t cpuif_base, uint32_t type) |
| { |
| uint32_t gicc_ctlr; |
| |
| /* Non-secure interrupts are signalled on the IRQ line always */ |
| if (type == INTR_TYPE_NS) |
| return __builtin_ctz(SCR_IRQ_BIT); |
| |
| /* |
| * Secure interrupts are signalled using the IRQ line if the FIQ_EN |
| * bit is not set else they are signalled using the FIQ line. |
| */ |
| gicc_ctlr = gicc_read_ctlr(cpuif_base); |
| if (gicc_ctlr & FIQ_EN) |
| return __builtin_ctz(SCR_FIQ_BIT); |
| else |
| return __builtin_ctz(SCR_IRQ_BIT); |
| } |