| # |
| # Copyright (C) 2018-2021 Marvell International Ltd. |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| # https://spdx.org/licenses |
| # |
| |
| MARVELL_PLAT_BASE := plat/marvell/armada |
| MARVELL_PLAT_INCLUDE_BASE := include/plat/marvell/armada |
| PLAT_FAMILY := a3k |
| PLAT_FAMILY_BASE := $(MARVELL_PLAT_BASE)/$(PLAT_FAMILY) |
| PLAT_INCLUDE_BASE := $(MARVELL_PLAT_INCLUDE_BASE)/$(PLAT_FAMILY) |
| PLAT_COMMON_BASE := $(PLAT_FAMILY_BASE)/common |
| MARVELL_DRV_BASE := drivers/marvell |
| MARVELL_COMMON_BASE := $(MARVELL_PLAT_BASE)/common |
| ERRATA_A53_1530924 := 1 |
| |
| include plat/marvell/marvell.mk |
| |
| #*********** A3700 ************* |
| |
| # GICV3 |
| $(eval $(call add_define,CONFIG_GICV3)) |
| |
| # CCI-400 |
| $(eval $(call add_define,USE_CCI)) |
| |
| # Include GICv3 driver files |
| include drivers/arm/gic/v3/gicv3.mk |
| |
| MARVELL_GIC_SOURCES := ${GICV3_SOURCES} \ |
| plat/common/plat_gicv3.c |
| |
| PLAT_INCLUDES := -I$(PLAT_FAMILY_BASE)/$(PLAT) \ |
| -I$(PLAT_COMMON_BASE)/include \ |
| -I$(PLAT_INCLUDE_BASE)/common \ |
| -I$(MARVELL_DRV_BASE) \ |
| -I$/drivers/arm/gic/common/ |
| |
| PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a3700_common.c \ |
| $(PLAT_COMMON_BASE)/aarch64/a3700_clock.S \ |
| $(MARVELL_DRV_BASE)/uart/a3700_console.S |
| |
| BL1_SOURCES += $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \ |
| lib/cpus/aarch64/cortex_a53.S |
| |
| MARVELL_DRV := $(MARVELL_DRV_BASE)/comphy/phy-comphy-3700.c |
| |
| BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \ |
| $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \ |
| $(PLAT_COMMON_BASE)/plat_cci.c \ |
| $(PLAT_COMMON_BASE)/plat_pm.c \ |
| $(PLAT_COMMON_BASE)/dram_win.c \ |
| $(PLAT_COMMON_BASE)/io_addr_dec.c \ |
| $(PLAT_COMMON_BASE)/marvell_plat_config.c \ |
| $(PLAT_FAMILY_BASE)/$(PLAT)/plat_bl31_setup.c \ |
| $(MARVELL_COMMON_BASE)/marvell_cci.c \ |
| $(MARVELL_COMMON_BASE)/marvell_ddr_info.c \ |
| $(MARVELL_COMMON_BASE)/marvell_gicv3.c \ |
| $(MARVELL_GIC_SOURCES) \ |
| drivers/arm/cci/cci.c \ |
| $(PLAT_COMMON_BASE)/a3700_sip_svc.c \ |
| $(MARVELL_DRV) |
| |
| ifeq ($(HANDLE_EA_EL3_FIRST_NS),1) |
| BL31_SOURCES += $(PLAT_COMMON_BASE)/a3700_ea.c |
| endif |
| |
| ifeq ($(CM3_SYSTEM_RESET),1) |
| BL31_SOURCES += $(PLAT_COMMON_BASE)/cm3_system_reset.c |
| endif |
| |
| ifeq ($(A3720_DB_PM_WAKEUP_SRC),1) |
| BL31_SOURCES += $(PLAT_FAMILY_BASE)/$(PLAT)/board/pm_src.c |
| endif |
| |
| ifdef WTP |
| |
| # Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds |
| $(if $(wildcard $(value WTP)/*),,$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' directory does not exist")) |
| $(if $(shell git -C $(value WTP) rev-parse --show-cdup 2>&1),$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' does not contain valid A3700-utils-marvell git repository")) |
| |
| TBB := $(WTP)/wtptp/src/TBB_Linux/release/TBB_linux |
| |
| BUILD_UART := uart-images |
| UART_IMAGE := $(BUILD_UART).tgz.bin |
| |
| ifeq ($(MARVELL_SECURE_BOOT),1) |
| TIM_CFG := $(BUILD_PLAT)/atf-tim.txt |
| TIM_UART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-tim.txt |
| IMAGESPATH := $(WTP)/tim/trusted |
| TIMN_CFG := $(BUILD_PLAT)/atf-timN.txt |
| TIMN_UART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-timN.txt |
| TIMN_SIG := $(IMAGESPATH)/timnsign.txt |
| TIM2IMGARGS := -i $(TIM_CFG) -n $(TIMN_CFG) |
| TIMN_UART_IMAGE := $$(grep "Image Filename:" -m 1 $(TIMN_UART_CFG) | cut -c 17-) |
| else #MARVELL_SECURE_BOOT |
| TIM_CFG := $(BUILD_PLAT)/atf-ntim.txt |
| TIM_UART_CFG := $(BUILD_PLAT)/$(BUILD_UART)/atf-ntim.txt |
| IMAGESPATH := $(WTP)/tim/untrusted |
| TIM2IMGARGS := -i $(TIM_CFG) |
| endif #MARVELL_SECURE_BOOT |
| |
| TIM_UART_IMAGE := $$(grep "Image Filename:" -m 1 $(TIM_UART_CFG) | cut -c 17-) |
| |
| TIMBUILD := $(WTP)/script/buildtim.sh |
| TIM2IMG := $(WTP)/script/tim2img.pl |
| TIMDDRTOOL := $(WTP)/tim/ddr/ddr_tool |
| |
| $(TIMBUILD): $(TIMDDRTOOL) |
| |
| # WTMI_IMG is used to specify the customized RTOS image running over |
| # Service CPU (CM3 processor). By the default, it points to a |
| # baremetal binary of fuse programming in A3700_utils. |
| WTMI_IMG := $(WTP)/wtmi/fuse/build/fuse.bin |
| |
| # WTMI_MULTI_IMG is composed of CM3 RTOS image (WTMI_IMG) |
| # and sys-init image. |
| WTMI_MULTI_IMG := $(WTP)/wtmi/build/wtmi.bin |
| |
| WTMI_ENC_IMG := wtmi-enc.bin |
| |
| SRCPATH := $(dir $(BL33)) |
| |
| CLOCKSPRESET ?= CPU_800_DDR_800 |
| |
| DDR_TOPOLOGY ?= 0 |
| |
| BOOTDEV ?= SPINOR |
| PARTNUM ?= 0 |
| |
| TIMBLDARGS := $(MARVELL_SECURE_BOOT) $(BOOTDEV) $(IMAGESPATH) $(WTP) $(CLOCKSPRESET) \ |
| $(DDR_TOPOLOGY) $(PARTNUM) $(DEBUG) $(TIM_CFG) $(TIMN_CFG) $(TIMN_SIG) 1 |
| TIMBLDUARTARGS := $(MARVELL_SECURE_BOOT) UART $(IMAGESPATH) $(WTP) $(CLOCKSPRESET) \ |
| $(DDR_TOPOLOGY) 0 0 $(TIM_UART_CFG) $(TIMN_UART_CFG) $(TIMN_SIG) 0 |
| |
| UART_IMAGES := $(BUILD_UART)/$(TIM_UART_IMAGE) |
| ifeq ($(MARVELL_SECURE_BOOT),1) |
| UART_IMAGES += $(BUILD_UART)/$(TIMN_UART_IMAGE) |
| endif |
| UART_IMAGES += $(BUILD_UART)/wtmi_h.bin $(BUILD_UART)/boot-image_h.bin |
| |
| CRYPTOPP_LIBDIR ?= $(CRYPTOPP_PATH) |
| CRYPTOPP_INCDIR ?= $(CRYPTOPP_PATH) |
| |
| $(TBB): FORCE |
| # Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds |
| $(if $(CRYPTOPP_LIBDIR),,$(error "Platform '$(PLAT)' for WTP image tool requires CRYPTOPP_PATH or CRYPTOPP_LIBDIR. Please set CRYPTOPP_PATH or CRYPTOPP_LIBDIR to point to the right directory")) |
| $(if $(CRYPTOPP_INCDIR),,$(error "Platform '$(PLAT)' for WTP image tool requires CRYPTOPP_PATH or CRYPTOPP_INCDIR. Please set CRYPTOPP_PATH or CRYPTOPP_INCDIR to point to the right directory")) |
| $(if $(wildcard $(CRYPTOPP_LIBDIR)/*),,$(error "Either 'CRYPTOPP_PATH' or 'CRYPTOPP_LIB' was set to '$(CRYPTOPP_LIBDIR)', but '$(CRYPTOPP_LIBDIR)' does not exist")) |
| $(if $(wildcard $(CRYPTOPP_INCDIR)/*),,$(error "Either 'CRYPTOPP_PATH' or 'CRYPTOPP_INCDIR' was set to '$(CRYPTOPP_INCDIR)', but '$(CRYPTOPP_INCDIR)' does not exist")) |
| ifdef CRYPTOPP_PATH |
| $(Q)$(MAKE) --no-print-directory -C $(CRYPTOPP_PATH) -f GNUmakefile |
| endif |
| $(Q)$(MAKE) --no-print-directory -C $(WTP)/wtptp/src/TBB_Linux -f TBB_linux.mak LIBDIR=$(CRYPTOPP_LIBDIR) INCDIR=$(CRYPTOPP_INCDIR) |
| |
| $(WTMI_MULTI_IMG): FORCE |
| $(Q)$(MAKE) --no-print-directory -C $(WTP) WTMI_IMG=$(WTMI_IMG) DDR_TOPOLOGY=$(DDR_TOPOLOGY) CLOCKSPRESET=$(CLOCKSPRESET) WTMI |
| |
| $(BUILD_PLAT)/wtmi.bin: $(WTMI_MULTI_IMG) |
| $(Q)cp -a $(WTMI_MULTI_IMG) $(BUILD_PLAT)/wtmi.bin |
| |
| $(TIMDDRTOOL): FORCE |
| # Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds |
| $(if $(value MV_DDR_PATH),,$(error "Platform '${PLAT}' for ddr tool requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory")) |
| $(if $(wildcard $(value MV_DDR_PATH)/*),,$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' directory does not exist")) |
| $(if $(shell git -C $(value MV_DDR_PATH) rev-parse --show-cdup 2>&1),$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' does not contain valid mv-ddr-marvell git repository")) |
| $(Q)$(MAKE) --no-print-directory -C $(WTP) MV_DDR_PATH=$(MV_DDR_PATH) DDR_TOPOLOGY=$(DDR_TOPOLOGY) mv_ddr |
| |
| $(BUILD_PLAT)/$(UART_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(TBB) $(TIMBUILD) $(TIMDDRTOOL) |
| @$(ECHO_BLANK_LINE) |
| @echo "Building uart images" |
| $(Q)mkdir -p $(BUILD_PLAT)/$(BUILD_UART) |
| $(Q)cp -a $(BUILD_PLAT)/wtmi.bin $(BUILD_PLAT)/$(BUILD_UART)/wtmi.bin |
| $(Q)cp -a $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/$(BUILD_UART)/$(BOOT_IMAGE) |
| $(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(TIMBUILD) $(TIMBLDUARTARGS) |
| $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIM_UART_CFG) |
| $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIM_UART_CFG) |
| ifeq ($(MARVELL_SECURE_BOOT),1) |
| $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIMN_UART_CFG) |
| $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIMN_UART_CFG) |
| endif |
| $(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(TBB) -r $(TIM_UART_CFG) -v -D |
| ifeq ($(MARVELL_SECURE_BOOT),1) |
| $(Q)cd $(BUILD_PLAT)/$(BUILD_UART) && $(TBB) -r $(TIMN_UART_CFG) |
| endif |
| $(Q)tar czf $(BUILD_PLAT)/$(UART_IMAGE) -C $(BUILD_PLAT) $(UART_IMAGES) |
| @$(ECHO_BLANK_LINE) |
| @echo "Built $@ successfully" |
| @$(ECHO_BLANK_LINE) |
| |
| $(BUILD_PLAT)/$(FLASH_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(TBB) $(TIMBUILD) $(TIMDDRTOOL) $(TIM2IMG) |
| @$(ECHO_BLANK_LINE) |
| @echo "Building flash image" |
| $(Q)cd $(BUILD_PLAT) && $(TIMBUILD) $(TIMBLDARGS) |
| $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIM_CFG) |
| $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIM_CFG) |
| ifeq ($(MARVELL_SECURE_BOOT),1) |
| $(Q)sed -i 's|WTMI_IMG|wtmi.bin|1' $(TIMN_CFG) |
| $(Q)sed -i 's|BOOT_IMAGE|$(BOOT_IMAGE)|1' $(TIMN_CFG) |
| @$(ECHO_BLANK_LINE) |
| @echo "======================================================="; |
| @echo " Secure boot. Encrypting wtmi and boot-image"; |
| @echo "======================================================="; |
| @$(ECHO_BLANK_LINE) |
| $(Q)cp $(BUILD_PLAT)/wtmi.bin $(BUILD_PLAT)/wtmi-align.bin |
| $(Q)truncate -s %16 $(BUILD_PLAT)/wtmi-align.bin |
| $(Q)${OPENSSL_BIN_PATH}/openssl enc -aes-256-cbc -e -in $(BUILD_PLAT)/wtmi-align.bin \ |
| -out $(BUILD_PLAT)/$(WTMI_ENC_IMG) \ |
| -K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \ |
| -iv `cat $(IMAGESPATH)/iv.txt` -p |
| $(Q)truncate -s %16 $(BUILD_PLAT)/$(BOOT_IMAGE); |
| $(Q)${OPENSSL_BIN_PATH}/openssl enc -aes-256-cbc -e -in $(BUILD_PLAT)/$(BOOT_IMAGE) \ |
| -out $(BUILD_PLAT)/$(BOOT_ENC_IMAGE) \ |
| -K `cat $(IMAGESPATH)/aes-256.txt` -nosalt \ |
| -iv `cat $(IMAGESPATH)/iv.txt` -p |
| endif |
| $(Q)cd $(BUILD_PLAT) && $(TBB) -r $(TIM_CFG) -v -D |
| ifeq ($(MARVELL_SECURE_BOOT),1) |
| $(Q)cd $(BUILD_PLAT) && $(TBB) -r $(TIMN_CFG) |
| $(Q)sed -i 's|wtmi.bin|$(WTMI_ENC_IMG)|1' $(TIMN_CFG) |
| $(Q)sed -i 's|$(BOOT_IMAGE)|$(BOOT_ENC_IMAGE)|1' $(TIMN_CFG) |
| endif |
| $(Q)cd $(BUILD_PLAT) && $(TIM2IMG) $(TIM2IMGARGS) -o $(BUILD_PLAT)/$(FLASH_IMAGE) |
| @$(ECHO_BLANK_LINE) |
| @echo "Built $@ successfully" |
| @$(ECHO_BLANK_LINE) |
| |
| clean realclean distclean: mrvl_clean |
| |
| .PHONY: mrvl_clean |
| mrvl_clean: |
| -$(Q)$(MAKE) --no-print-directory -C $(WTP) MV_DDR_PATH=$(MV_DDR_PATH) clean |
| -$(Q)$(MAKE) --no-print-directory -C $(WTP)/wtptp/src/TBB_Linux -f TBB_linux.mak clean |
| ifdef CRYPTOPP_PATH |
| -$(Q)$(MAKE) --no-print-directory -C $(CRYPTOPP_PATH) -f GNUmakefile clean |
| endif |
| |
| else # WTP |
| |
| $(BUILD_PLAT)/$(UART_IMAGE) $(BUILD_PLAT)/$(FLASH_IMAGE): |
| $(error "Platform '${PLAT}' for target '$@' requires WTP. Please set WTP to point to the right directory") |
| |
| endif # WTP |
| |
| .PHONY: mrvl_uart |
| mrvl_uart: $(BUILD_PLAT)/$(UART_IMAGE) |