| /* |
| * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef __ASM_MACROS_S__ |
| #define __ASM_MACROS_S__ |
| |
| #include <arch.h> |
| #include <asm_macros_common.S> |
| #include <spinlock.h> |
| |
| #define WORD_SIZE 4 |
| |
| /* |
| * Co processor register accessors |
| */ |
| .macro ldcopr reg, coproc, opc1, CRn, CRm, opc2 |
| mrc \coproc, \opc1, \reg, \CRn, \CRm, \opc2 |
| .endm |
| |
| .macro ldcopr16 reg1, reg2, coproc, opc1, CRm |
| mrrc \coproc, \opc1, \reg1, \reg2, \CRm |
| .endm |
| |
| .macro stcopr reg, coproc, opc1, CRn, CRm, opc2 |
| mcr \coproc, \opc1, \reg, \CRn, \CRm, \opc2 |
| .endm |
| |
| .macro stcopr16 reg1, reg2, coproc, opc1, CRm |
| mcrr \coproc, \opc1, \reg1, \reg2, \CRm |
| .endm |
| |
| /* Cache line size helpers */ |
| .macro dcache_line_size reg, tmp |
| ldcopr \tmp, CTR |
| ubfx \tmp, \tmp, #CTR_DMINLINE_SHIFT, #CTR_DMINLINE_WIDTH |
| mov \reg, #WORD_SIZE |
| lsl \reg, \reg, \tmp |
| .endm |
| |
| .macro icache_line_size reg, tmp |
| ldcopr \tmp, CTR |
| and \tmp, \tmp, #CTR_IMINLINE_MASK |
| mov \reg, #WORD_SIZE |
| lsl \reg, \reg, \tmp |
| .endm |
| |
| /* |
| * Declare the exception vector table, enforcing it is aligned on a |
| * 32 byte boundary. |
| */ |
| .macro vector_base label |
| .section .vectors, "ax" |
| .align 5 |
| \label: |
| .endm |
| |
| /* |
| * This macro calculates the base address of the current CPU's multi |
| * processor(MP) stack using the plat_my_core_pos() index, the name of |
| * the stack storage and the size of each stack. |
| * Out: r0 = physical address of stack base |
| * Clobber: r14, r1, r2 |
| */ |
| .macro get_my_mp_stack _name, _size |
| bl plat_my_core_pos |
| ldr r2, =(\_name + \_size) |
| mov r1, #\_size |
| mla r0, r0, r1, r2 |
| .endm |
| |
| /* |
| * This macro calculates the base address of a uniprocessor(UP) stack |
| * using the name of the stack storage and the size of the stack |
| * Out: r0 = physical address of stack base |
| */ |
| .macro get_up_stack _name, _size |
| ldr r0, =(\_name + \_size) |
| .endm |
| |
| /* |
| * Helper macro to generate the best mov/movw/movt combinations |
| * according to the value to be moved. |
| */ |
| .macro mov_imm _reg, _val |
| .if ((\_val) & 0xffff0000) == 0 |
| mov \_reg, #(\_val) |
| .else |
| movw \_reg, #((\_val) & 0xffff) |
| movt \_reg, #((\_val) >> 16) |
| .endif |
| .endm |
| |
| /* |
| * Macro to mark instances where we're jumping to a function and don't |
| * expect a return. To provide the function being jumped to with |
| * additional information, we use 'bl' instruction to jump rather than |
| * 'b'. |
| * |
| * Debuggers infer the location of a call from where LR points to, which |
| * is usually the instruction after 'bl'. If this macro expansion |
| * happens to be the last location in a function, that'll cause the LR |
| * to point a location beyond the function, thereby misleading debugger |
| * back trace. We therefore insert a 'nop' after the function call for |
| * debug builds, unless 'skip_nop' parameter is non-zero. |
| */ |
| .macro no_ret _func:req, skip_nop=0 |
| bl \_func |
| #if DEBUG |
| .ifeq \skip_nop |
| nop |
| .endif |
| #endif |
| .endm |
| |
| /* |
| * Reserve space for a spin lock in assembly file. |
| */ |
| .macro define_asm_spinlock _name:req |
| .align SPINLOCK_ASM_ALIGN |
| \_name: |
| .space SPINLOCK_ASM_SIZE |
| .endm |
| |
| /* |
| * Helper macro to OR the bottom 32 bits of `_val` into `_reg_l` |
| * and the top 32 bits of `_val` into `_reg_h`. If either the bottom |
| * or top word of `_val` is zero, the corresponding OR operation |
| * is skipped. |
| */ |
| .macro orr64_imm _reg_l, _reg_h, _val |
| .if (\_val >> 32) |
| orr \_reg_h, \_reg_h, #(\_val >> 32) |
| .endif |
| .if (\_val & 0xffffffff) |
| orr \_reg_l, \_reg_l, #(\_val & 0xffffffff) |
| .endif |
| .endm |
| |
| /* |
| * Helper macro to bitwise-clear bits in `_reg_l` and |
| * `_reg_h` given a 64 bit immediate `_val`. The set bits |
| * in the bottom word of `_val` dictate which bits from |
| * `_reg_l` should be cleared. Similarly, the set bits in |
| * the top word of `_val` dictate which bits from `_reg_h` |
| * should be cleared. If either the bottom or top word of |
| * `_val` is zero, the corresponding BIC operation is skipped. |
| */ |
| .macro bic64_imm _reg_l, _reg_h, _val |
| .if (\_val >> 32) |
| bic \_reg_h, \_reg_h, #(\_val >> 32) |
| .endif |
| .if (\_val & 0xffffffff) |
| bic \_reg_l, \_reg_l, #(\_val & 0xffffffff) |
| .endif |
| .endm |
| |
| #endif /* __ASM_MACROS_S__ */ |