blob: b8db4a6a225c4480546de1bc493c721e1dee4318 [file] [log] [blame]
/*
* Copyright (c) 2018-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <errno.h>
#include <plat_arm.h>
#include <plat_private.h>
#include <bl31/bl31.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <drivers/arm/dcc.h>
#include <drivers/arm/pl011.h>
#include <drivers/console.h>
#include <lib/mmio.h>
#include <lib/xlat_tables/xlat_tables.h>
#include <plat/common/platform.h>
#include <versal_def.h>
#include <plat_private.h>
#include <plat_startup.h>
#include <pm_ipi.h>
#include "pm_client.h"
#include "pm_api_sys.h"
static entry_point_info_t bl32_image_ep_info;
static entry_point_info_t bl33_image_ep_info;
/*
* Return a pointer to the 'entry_point_info' structure of the next image for
* the security state specified. BL33 corresponds to the non-secure image type
* while BL32 corresponds to the secure image type. A NULL pointer is returned
* if the image does not exist.
*/
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
assert(sec_state_is_valid(type));
if (type == NON_SECURE) {
return &bl33_image_ep_info;
}
return &bl32_image_ep_info;
}
/*
* Set the build time defaults,if we can't find any config data.
*/
static inline void bl31_set_default_config(void)
{
bl32_image_ep_info.pc = (uintptr_t)BL32_BASE;
bl32_image_ep_info.spsr = (uint32_t)arm_get_spsr_for_bl32_entry();
bl33_image_ep_info.pc = (uintptr_t)plat_get_ns_image_entrypoint();
bl33_image_ep_info.spsr = (uint32_t)SPSR_64(MODE_EL2, MODE_SP_ELX,
DISABLE_ALL_EXCEPTIONS);
}
/*
* Perform any BL31 specific platform actions. Here is an opportunity to copy
* parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they
* are lost (potentially). This needs to be done before the MMU is initialized
* so that the memory layout can be used while creating page tables.
*/
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
uint64_t atf_handoff_addr;
uint32_t payload[PAYLOAD_ARG_CNT], max_size = ATF_HANDOFF_PARAMS_MAX_SIZE;
enum pm_ret_status ret_status;
uint64_t addr[ATF_HANDOFF_PARAMS_MAX_SIZE];
if (VERSAL_CONSOLE_IS(pl011) || (VERSAL_CONSOLE_IS(pl011_1))) {
static console_t versal_runtime_console;
/* Initialize the console to provide early debug support */
int32_t rc = console_pl011_register((uintptr_t)VERSAL_UART_BASE,
(uint32_t)VERSAL_UART_CLOCK,
(uint32_t)VERSAL_UART_BAUDRATE,
&versal_runtime_console);
if (rc == 0) {
panic();
}
console_set_scope(&versal_runtime_console, (uint32_t)(CONSOLE_FLAG_BOOT |
CONSOLE_FLAG_RUNTIME));
} else if (VERSAL_CONSOLE_IS(dcc)) {
/* Initialize the dcc console for debug */
int32_t rc = console_dcc_register();
if (rc == 0) {
panic();
}
} else {
NOTICE("BL31: Did not register for any console.\n");
}
/* Initialize the platform config for future decision making */
versal_config_setup();
/* There are no parameters from BL2 if BL31 is a reset vector */
assert(arg0 == 0U);
assert(arg1 == 0U);
/*
* Do initial security configuration to allow DRAM/device access. On
* Base VERSAL only DRAM security is programmable (via TrustZone), but
* other platforms might have more programmable security devices
* present.
*/
/* Populate common information for BL32 and BL33 */
SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0);
SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
PM_PACK_PAYLOAD4(payload, LOADER_MODULE_ID, 1, PM_LOAD_GET_HANDOFF_PARAMS,
(uintptr_t)addr >> 32U, (uintptr_t)addr, max_size);
ret_status = pm_ipi_send_sync(primary_proc, payload, NULL, 0);
if (ret_status == PM_RET_SUCCESS) {
INFO("BL31: GET_HANDOFF_PARAMS call success=%d\n", ret_status);
atf_handoff_addr = (uintptr_t)&addr;
} else {
ERROR("BL31: GET_HANDOFF_PARAMS Failed, read atf_handoff_addr from reg\n");
atf_handoff_addr = mmio_read_32(PMC_GLOBAL_GLOB_GEN_STORAGE4);
}
enum fsbl_handoff ret = fsbl_atf_handover(&bl32_image_ep_info,
&bl33_image_ep_info,
atf_handoff_addr);
if (ret == FSBL_HANDOFF_NO_STRUCT || ret == FSBL_HANDOFF_INVAL_STRUCT) {
bl31_set_default_config();
} else if (ret == FSBL_HANDOFF_TOO_MANY_PARTS) {
ERROR("BL31: Error too many partitions %u\n", ret);
} else if (ret != FSBL_HANDOFF_SUCCESS) {
panic();
} else {
INFO("BL31: fsbl-atf handover success %u\n", ret);
}
NOTICE("BL31: Secure code at 0x%lx\n", bl32_image_ep_info.pc);
NOTICE("BL31: Non secure code at 0x%lx\n", bl33_image_ep_info.pc);
}
static interrupt_type_handler_t type_el3_interrupt_handler;
int32_t request_intr_type_el3(uint32_t id, interrupt_type_handler_t handler)
{
/* Validate 'handler'*/
if (handler == NULL) {
return -EINVAL;
}
type_el3_interrupt_handler = handler;
return 0;
}
static uint64_t rdo_el3_interrupt_handler(uint32_t id, uint32_t flags,
void *handle, void *cookie)
{
uint32_t intr_id;
interrupt_type_handler_t handler;
intr_id = plat_ic_get_pending_interrupt_id();
/* Currently we support one interrupt */
if (intr_id != PLAT_VERSAL_IPI_IRQ) {
WARN("Unexpected interrupt call: 0x%x\n", intr_id);
return 0;
}
handler = type_el3_interrupt_handler;
if (handler != NULL) {
return handler(intr_id, flags, handle, cookie);
}
return 0;
}
void bl31_platform_setup(void)
{
/* Initialize the gic cpu and distributor interfaces */
plat_versal_gic_driver_init();
plat_versal_gic_init();
}
void bl31_plat_runtime_setup(void)
{
uint64_t flags = 0;
int32_t rc;
set_interrupt_rm_flag(flags, NON_SECURE);
rc = register_interrupt_type_handler(INTR_TYPE_EL3,
rdo_el3_interrupt_handler, flags);
if (rc != 0) {
panic();
}
}
/*
* Perform the very early platform specific architectural setup here.
*/
void bl31_plat_arch_setup(void)
{
plat_arm_interconnect_init();
plat_arm_interconnect_enter_coherency();
const mmap_region_t bl_regions[] = {
MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
MT_MEMORY | MT_RW | MT_SECURE),
MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
MT_CODE | MT_SECURE),
MAP_REGION_FLAT(BL_RO_DATA_BASE, BL_RO_DATA_END - BL_RO_DATA_BASE,
MT_RO_DATA | MT_SECURE),
MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
MT_DEVICE | MT_RW | MT_SECURE),
{0}
};
setup_page_tables(bl_regions, plat_versal_get_mmap());
enable_mmu_el3(0);
}