| /* |
| * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch_helpers.h> |
| #include <debug.h> |
| #include <dram.h> |
| #include <plat_private.h> |
| #include <platform_def.h> |
| #include <pmu_regs.h> |
| #include <rk3399_def.h> |
| #include <secure.h> |
| #include <soc.h> |
| #include <suspend.h> |
| |
| #define PMUGRF_OS_REG0 0x300 |
| #define PMUGRF_OS_REG1 0x304 |
| #define PMUGRF_OS_REG2 0x308 |
| #define PMUGRF_OS_REG3 0x30c |
| |
| #define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \ |
| ((n) << (8 + (ch) * 4))) |
| #define CRU_SFTRST_DDR_PHY(ch, n) ((0x1 << (9 + 16 + (ch) * 4)) | \ |
| ((n) << (9 + (ch) * 4))) |
| |
| #define FBDIV_ENC(n) ((n) << 16) |
| #define FBDIV_DEC(n) (((n) >> 16) & 0xfff) |
| #define POSTDIV2_ENC(n) ((n) << 12) |
| #define POSTDIV2_DEC(n) (((n) >> 12) & 0x7) |
| #define POSTDIV1_ENC(n) ((n) << 8) |
| #define POSTDIV1_DEC(n) (((n) >> 8) & 0x7) |
| #define REFDIV_ENC(n) (n) |
| #define REFDIV_DEC(n) ((n) & 0x3f) |
| |
| /* PMU CRU */ |
| #define PMUCRU_RSTNHOLD_CON0 0x120 |
| #define PMUCRU_RSTNHOLD_CON1 0x124 |
| |
| #define PRESET_GPIO0_HOLD(n) (((n) << 7) | WMSK_BIT(7)) |
| #define PRESET_GPIO1_HOLD(n) (((n) << 8) | WMSK_BIT(8)) |
| |
| #define SYS_COUNTER_FREQ_IN_MHZ (SYS_COUNTER_FREQ_IN_TICKS / 1000000) |
| |
| __pmusramdata uint32_t dpll_data[PLL_CON_COUNT]; |
| __pmusramdata uint32_t cru_clksel_con6; |
| |
| /* |
| * Copy @num registers from @src to @dst |
| */ |
| static __pmusramfunc void sram_regcpy(uintptr_t dst, uintptr_t src, |
| uint32_t num) |
| { |
| while (num--) { |
| mmio_write_32(dst, mmio_read_32(src)); |
| dst += sizeof(uint32_t); |
| src += sizeof(uint32_t); |
| } |
| } |
| |
| /* |
| * Copy @num registers from @src to @dst |
| * This is intentionally a copy of the sram_regcpy function. PMUSRAM functions |
| * cannot be called from code running in DRAM. |
| */ |
| static void dram_regcpy(uintptr_t dst, uintptr_t src, uint32_t num) |
| { |
| while (num--) { |
| mmio_write_32(dst, mmio_read_32(src)); |
| dst += sizeof(uint32_t); |
| src += sizeof(uint32_t); |
| } |
| } |
| |
| static __pmusramfunc uint32_t sram_get_timer_value(void) |
| { |
| /* |
| * Generic delay timer implementation expects the timer to be a down |
| * counter. We apply bitwise NOT operator to the tick values returned |
| * by read_cntpct_el0() to simulate the down counter. |
| */ |
| return (uint32_t)(~read_cntpct_el0()); |
| } |
| |
| static __pmusramfunc void sram_udelay(uint32_t usec) |
| { |
| uint32_t start, cnt, delta, total_ticks; |
| |
| /* counter is decreasing */ |
| start = sram_get_timer_value(); |
| total_ticks = usec * SYS_COUNTER_FREQ_IN_MHZ; |
| do { |
| cnt = sram_get_timer_value(); |
| if (cnt > start) { |
| delta = UINT32_MAX - cnt; |
| delta += start; |
| } else |
| delta = start - cnt; |
| } while (delta <= total_ticks); |
| } |
| |
| static __pmusramfunc void configure_sgrf(void) |
| { |
| /* |
| * SGRF_DDR_RGN_DPLL_CLK and SGRF_DDR_RGN_RTC_CLK: |
| * IC ECO bug, need to set this register. |
| * |
| * SGRF_DDR_RGN_BYPS: |
| * After the PD_CENTER suspend/resume, the DDR region |
| * related registers in the SGRF will be reset, we |
| * need to re-initialize them. |
| */ |
| mmio_write_32(SGRF_BASE + SGRF_DDRRGN_CON0_16(16), |
| SGRF_DDR_RGN_DPLL_CLK | |
| SGRF_DDR_RGN_RTC_CLK | |
| SGRF_DDR_RGN_BYPS); |
| } |
| |
| static __pmusramfunc void rkclk_ddr_reset(uint32_t channel, uint32_t ctl, |
| uint32_t phy) |
| { |
| channel &= 0x1; |
| ctl &= 0x1; |
| phy &= 0x1; |
| mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(4), |
| CRU_SFTRST_DDR_CTRL(channel, ctl) | |
| CRU_SFTRST_DDR_PHY(channel, phy)); |
| } |
| |
| static __pmusramfunc void phy_pctrl_reset(uint32_t ch) |
| { |
| rkclk_ddr_reset(ch, 1, 1); |
| sram_udelay(10); |
| rkclk_ddr_reset(ch, 1, 0); |
| sram_udelay(10); |
| rkclk_ddr_reset(ch, 0, 0); |
| sram_udelay(10); |
| } |
| |
| static __pmusramfunc void set_cs_training_index(uint32_t ch, uint32_t rank) |
| { |
| uint32_t byte; |
| |
| /* PHY_8/136/264/392 phy_per_cs_training_index_X 1bit offset_24 */ |
| for (byte = 0; byte < 4; byte++) |
| mmio_clrsetbits_32(PHY_REG(ch, 8 + (128 * byte)), 0x1 << 24, |
| rank << 24); |
| } |
| |
| static __pmusramfunc void select_per_cs_training_index(uint32_t ch, |
| uint32_t rank) |
| { |
| /* PHY_84 PHY_PER_CS_TRAINING_EN_0 1bit offset_16 */ |
| if ((mmio_read_32(PHY_REG(ch, 84)) >> 16) & 1) |
| set_cs_training_index(ch, rank); |
| } |
| |
| static __pmusramfunc void override_write_leveling_value(uint32_t ch) |
| { |
| uint32_t byte; |
| |
| for (byte = 0; byte < 4; byte++) { |
| /* |
| * PHY_8/136/264/392 |
| * phy_per_cs_training_multicast_en_X 1bit offset_16 |
| */ |
| mmio_clrsetbits_32(PHY_REG(ch, 8 + (128 * byte)), 0x1 << 16, |
| 1 << 16); |
| mmio_clrsetbits_32(PHY_REG(ch, 63 + (128 * byte)), |
| 0xffff << 16, |
| 0x200 << 16); |
| } |
| |
| /* CTL_200 ctrlupd_req 1bit offset_8 */ |
| mmio_clrsetbits_32(CTL_REG(ch, 200), 0x1 << 8, 0x1 << 8); |
| } |
| |
| static __pmusramfunc int data_training(uint32_t ch, |
| struct rk3399_sdram_params *sdram_params, |
| uint32_t training_flag) |
| { |
| uint32_t obs_0, obs_1, obs_2, obs_3, obs_err = 0; |
| uint32_t rank = sdram_params->ch[ch].rank; |
| uint32_t rank_mask; |
| uint32_t i, tmp; |
| |
| if (sdram_params->dramtype == LPDDR4) |
| rank_mask = (rank == 1) ? 0x5 : 0xf; |
| else |
| rank_mask = (rank == 1) ? 0x1 : 0x3; |
| |
| /* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */ |
| mmio_setbits_32(PHY_REG(ch, 927), (1 << 22)); |
| |
| if (training_flag == PI_FULL_TRAINING) { |
| if (sdram_params->dramtype == LPDDR4) { |
| training_flag = PI_WRITE_LEVELING | |
| PI_READ_GATE_TRAINING | |
| PI_READ_LEVELING | |
| PI_WDQ_LEVELING; |
| } else if (sdram_params->dramtype == LPDDR3) { |
| training_flag = PI_CA_TRAINING | PI_WRITE_LEVELING | |
| PI_READ_GATE_TRAINING; |
| } else if (sdram_params->dramtype == DDR3) { |
| training_flag = PI_WRITE_LEVELING | |
| PI_READ_GATE_TRAINING | |
| PI_READ_LEVELING; |
| } |
| } |
| |
| /* ca training(LPDDR4,LPDDR3 support) */ |
| if ((training_flag & PI_CA_TRAINING) == PI_CA_TRAINING) { |
| for (i = 0; i < 4; i++) { |
| if (!(rank_mask & (1 << i))) |
| continue; |
| |
| select_per_cs_training_index(ch, i); |
| /* PI_100 PI_CALVL_EN:RW:8:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 100), 0x3 << 8, 0x2 << 8); |
| |
| /* PI_92 PI_CALVL_REQ:WR:16:1,PI_CALVL_CS:RW:24:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 92), |
| (0x1 << 16) | (0x3 << 24), |
| (0x1 << 16) | (i << 24)); |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| |
| /* |
| * check status obs |
| * PHY_532/660/788 phy_adr_calvl_obs1_:0:32 |
| */ |
| obs_0 = mmio_read_32(PHY_REG(ch, 532)); |
| obs_1 = mmio_read_32(PHY_REG(ch, 660)); |
| obs_2 = mmio_read_32(PHY_REG(ch, 788)); |
| if (((obs_0 >> 30) & 0x3) || |
| ((obs_1 >> 30) & 0x3) || |
| ((obs_2 >> 30) & 0x3)) |
| obs_err = 1; |
| if ((((tmp >> 11) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 5) & 0x1) == 0x0) && |
| (obs_err == 0)) |
| break; |
| else if ((((tmp >> 5) & 0x1) == 0x1) || |
| (obs_err == 1)) |
| return -1; |
| } |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| } |
| mmio_clrbits_32(PI_REG(ch, 100), 0x3 << 8); |
| } |
| |
| /* write leveling(LPDDR4,LPDDR3,DDR3 support) */ |
| if ((training_flag & PI_WRITE_LEVELING) == PI_WRITE_LEVELING) { |
| for (i = 0; i < rank; i++) { |
| select_per_cs_training_index(ch, i); |
| /* PI_60 PI_WRLVL_EN:RW:8:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 60), 0x3 << 8, 0x2 << 8); |
| /* PI_59 PI_WRLVL_REQ:WR:8:1,PI_WRLVL_CS:RW:16:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 59), |
| (0x1 << 8) | (0x3 << 16), |
| (0x1 << 8) | (i << 16)); |
| |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| |
| /* |
| * check status obs, if error maybe can not |
| * get leveling done PHY_40/168/296/424 |
| * phy_wrlvl_status_obs_X:0:13 |
| */ |
| obs_0 = mmio_read_32(PHY_REG(ch, 40)); |
| obs_1 = mmio_read_32(PHY_REG(ch, 168)); |
| obs_2 = mmio_read_32(PHY_REG(ch, 296)); |
| obs_3 = mmio_read_32(PHY_REG(ch, 424)); |
| if (((obs_0 >> 12) & 0x1) || |
| ((obs_1 >> 12) & 0x1) || |
| ((obs_2 >> 12) & 0x1) || |
| ((obs_3 >> 12) & 0x1)) |
| obs_err = 1; |
| if ((((tmp >> 10) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 4) & 0x1) == 0x0) && |
| (obs_err == 0)) |
| break; |
| else if ((((tmp >> 4) & 0x1) == 0x1) || |
| (obs_err == 1)) |
| return -1; |
| } |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| } |
| override_write_leveling_value(ch); |
| mmio_clrbits_32(PI_REG(ch, 60), 0x3 << 8); |
| } |
| |
| /* read gate training(LPDDR4,LPDDR3,DDR3 support) */ |
| if ((training_flag & PI_READ_GATE_TRAINING) == PI_READ_GATE_TRAINING) { |
| for (i = 0; i < rank; i++) { |
| select_per_cs_training_index(ch, i); |
| /* PI_80 PI_RDLVL_GATE_EN:RW:24:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 80), 0x3 << 24, |
| 0x2 << 24); |
| /* |
| * PI_74 PI_RDLVL_GATE_REQ:WR:16:1 |
| * PI_RDLVL_CS:RW:24:2 |
| */ |
| mmio_clrsetbits_32(PI_REG(ch, 74), |
| (0x1 << 16) | (0x3 << 24), |
| (0x1 << 16) | (i << 24)); |
| |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| |
| /* |
| * check status obs |
| * PHY_43/171/299/427 |
| * PHY_GTLVL_STATUS_OBS_x:16:8 |
| */ |
| obs_0 = mmio_read_32(PHY_REG(ch, 43)); |
| obs_1 = mmio_read_32(PHY_REG(ch, 171)); |
| obs_2 = mmio_read_32(PHY_REG(ch, 299)); |
| obs_3 = mmio_read_32(PHY_REG(ch, 427)); |
| if (((obs_0 >> (16 + 6)) & 0x3) || |
| ((obs_1 >> (16 + 6)) & 0x3) || |
| ((obs_2 >> (16 + 6)) & 0x3) || |
| ((obs_3 >> (16 + 6)) & 0x3)) |
| obs_err = 1; |
| if ((((tmp >> 9) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 3) & 0x1) == 0x0) && |
| (obs_err == 0)) |
| break; |
| else if ((((tmp >> 3) & 0x1) == 0x1) || |
| (obs_err == 1)) |
| return -1; |
| } |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| } |
| mmio_clrbits_32(PI_REG(ch, 80), 0x3 << 24); |
| } |
| |
| /* read leveling(LPDDR4,LPDDR3,DDR3 support) */ |
| if ((training_flag & PI_READ_LEVELING) == PI_READ_LEVELING) { |
| for (i = 0; i < rank; i++) { |
| select_per_cs_training_index(ch, i); |
| /* PI_80 PI_RDLVL_EN:RW:16:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 80), 0x3 << 16, |
| 0x2 << 16); |
| /* PI_74 PI_RDLVL_REQ:WR:8:1,PI_RDLVL_CS:RW:24:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 74), |
| (0x1 << 8) | (0x3 << 24), |
| (0x1 << 8) | (i << 24)); |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| |
| /* |
| * make sure status obs not report error bit |
| * PHY_46/174/302/430 |
| * phy_rdlvl_status_obs_X:16:8 |
| */ |
| if ((((tmp >> 8) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 2) & 0x1) == 0x0)) |
| break; |
| else if (((tmp >> 2) & 0x1) == 0x1) |
| return -1; |
| } |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| } |
| mmio_clrbits_32(PI_REG(ch, 80), 0x3 << 16); |
| } |
| |
| /* wdq leveling(LPDDR4 support) */ |
| if ((training_flag & PI_WDQ_LEVELING) == PI_WDQ_LEVELING) { |
| for (i = 0; i < 4; i++) { |
| if (!(rank_mask & (1 << i))) |
| continue; |
| |
| select_per_cs_training_index(ch, i); |
| /* |
| * disable PI_WDQLVL_VREF_EN before wdq leveling? |
| * PI_181 PI_WDQLVL_VREF_EN:RW:8:1 |
| */ |
| mmio_clrbits_32(PI_REG(ch, 181), 0x1 << 8); |
| /* PI_124 PI_WDQLVL_EN:RW:16:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 124), 0x3 << 16, |
| 0x2 << 16); |
| /* PI_121 PI_WDQLVL_REQ:WR:8:1,PI_WDQLVL_CS:RW:16:2 */ |
| mmio_clrsetbits_32(PI_REG(ch, 121), |
| (0x1 << 8) | (0x3 << 16), |
| (0x1 << 8) | (i << 16)); |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| if ((((tmp >> 12) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 6) & 0x1) == 0x0)) |
| break; |
| else if (((tmp >> 6) & 0x1) == 0x1) |
| return -1; |
| } |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| } |
| mmio_clrbits_32(PI_REG(ch, 124), 0x3 << 16); |
| } |
| |
| /* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */ |
| mmio_clrbits_32(PHY_REG(ch, 927), (1 << 22)); |
| |
| return 0; |
| } |
| |
| static __pmusramfunc void set_ddrconfig( |
| struct rk3399_sdram_params *sdram_params, |
| unsigned char channel, uint32_t ddrconfig) |
| { |
| /* only need to set ddrconfig */ |
| struct rk3399_sdram_channel *ch = &sdram_params->ch[channel]; |
| unsigned int cs0_cap = 0; |
| unsigned int cs1_cap = 0; |
| |
| cs0_cap = (1 << (ch->cs0_row + ch->col + ch->bk + ch->bw - 20)); |
| if (ch->rank > 1) |
| cs1_cap = cs0_cap >> (ch->cs0_row - ch->cs1_row); |
| if (ch->row_3_4) { |
| cs0_cap = cs0_cap * 3 / 4; |
| cs1_cap = cs1_cap * 3 / 4; |
| } |
| |
| mmio_write_32(MSCH_BASE(channel) + MSCH_DEVICECONF, |
| ddrconfig | (ddrconfig << 6)); |
| mmio_write_32(MSCH_BASE(channel) + MSCH_DEVICESIZE, |
| ((cs0_cap / 32) & 0xff) | (((cs1_cap / 32) & 0xff) << 8)); |
| } |
| |
| static __pmusramfunc void dram_all_config( |
| struct rk3399_sdram_params *sdram_params) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < 2; i++) { |
| struct rk3399_sdram_channel *info = &sdram_params->ch[i]; |
| struct rk3399_msch_timings *noc = &info->noc_timings; |
| |
| if (sdram_params->ch[i].col == 0) |
| continue; |
| |
| mmio_write_32(MSCH_BASE(i) + MSCH_DDRTIMINGA0, |
| noc->ddrtiminga0.d32); |
| mmio_write_32(MSCH_BASE(i) + MSCH_DDRTIMINGB0, |
| noc->ddrtimingb0.d32); |
| mmio_write_32(MSCH_BASE(i) + MSCH_DDRTIMINGC0, |
| noc->ddrtimingc0.d32); |
| mmio_write_32(MSCH_BASE(i) + MSCH_DEVTODEV0, |
| noc->devtodev0.d32); |
| mmio_write_32(MSCH_BASE(i) + MSCH_DDRMODE, noc->ddrmode.d32); |
| |
| /* rank 1 memory clock disable (dfi_dram_clk_disable = 1) */ |
| if (sdram_params->ch[i].rank == 1) |
| mmio_setbits_32(CTL_REG(i, 276), 1 << 17); |
| } |
| |
| DDR_STRIDE(sdram_params->stride); |
| |
| /* reboot hold register set */ |
| mmio_write_32(PMUCRU_BASE + CRU_PMU_RSTHOLD_CON(1), |
| CRU_PMU_SGRF_RST_RLS | |
| PRESET_GPIO0_HOLD(1) | |
| PRESET_GPIO1_HOLD(1)); |
| mmio_clrsetbits_32(CRU_BASE + CRU_GLB_RST_CON, 0x3, 0x3); |
| } |
| |
| static __pmusramfunc void pctl_cfg(uint32_t ch, |
| struct rk3399_sdram_params *sdram_params) |
| { |
| const uint32_t *params_ctl = sdram_params->pctl_regs.denali_ctl; |
| const uint32_t *params_pi = sdram_params->pi_regs.denali_pi; |
| const struct rk3399_ddr_publ_regs *phy_regs = &sdram_params->phy_regs; |
| uint32_t tmp, tmp1, tmp2, i; |
| |
| /* |
| * Workaround controller bug: |
| * Do not program DRAM_CLASS until NO_PHY_IND_TRAIN_INT is programmed |
| */ |
| sram_regcpy(CTL_REG(ch, 1), (uintptr_t)¶ms_ctl[1], |
| CTL_REG_NUM - 1); |
| mmio_write_32(CTL_REG(ch, 0), params_ctl[0]); |
| sram_regcpy(PI_REG(ch, 0), (uintptr_t)¶ms_pi[0], |
| PI_REG_NUM); |
| |
| sram_regcpy(PHY_REG(ch, 910), (uintptr_t)&phy_regs->phy896[910 - 896], |
| 3); |
| |
| mmio_clrsetbits_32(CTL_REG(ch, 68), PWRUP_SREFRESH_EXIT, |
| PWRUP_SREFRESH_EXIT); |
| |
| /* PHY_DLL_RST_EN */ |
| mmio_clrsetbits_32(PHY_REG(ch, 957), 0x3 << 24, 1 << 24); |
| dmbst(); |
| |
| mmio_setbits_32(PI_REG(ch, 0), START); |
| mmio_setbits_32(CTL_REG(ch, 0), START); |
| |
| /* wait lock */ |
| while (1) { |
| tmp = mmio_read_32(PHY_REG(ch, 920)); |
| tmp1 = mmio_read_32(PHY_REG(ch, 921)); |
| tmp2 = mmio_read_32(PHY_REG(ch, 922)); |
| if ((((tmp >> 16) & 0x1) == 0x1) && |
| (((tmp1 >> 16) & 0x1) == 0x1) && |
| (((tmp1 >> 0) & 0x1) == 0x1) && |
| (((tmp2 >> 0) & 0x1) == 0x1)) |
| break; |
| /* if PLL bypass,don't need wait lock */ |
| if (mmio_read_32(PHY_REG(ch, 911)) & 0x1) |
| break; |
| } |
| |
| sram_regcpy(PHY_REG(ch, 896), (uintptr_t)&phy_regs->phy896[0], 63); |
| |
| for (i = 0; i < 4; i++) |
| sram_regcpy(PHY_REG(ch, 128 * i), |
| (uintptr_t)&phy_regs->phy0[0], 91); |
| |
| for (i = 0; i < 3; i++) |
| sram_regcpy(PHY_REG(ch, 512 + 128 * i), |
| (uintptr_t)&phy_regs->phy512[i][0], 38); |
| } |
| |
| static __pmusramfunc int dram_switch_to_next_index( |
| struct rk3399_sdram_params *sdram_params) |
| { |
| uint32_t ch, ch_count; |
| uint32_t fn = ((mmio_read_32(CTL_REG(0, 111)) >> 16) + 1) & 0x1; |
| |
| mmio_write_32(CIC_BASE + CIC_CTRL0, |
| (((0x3 << 4) | (1 << 2) | 1) << 16) | |
| (fn << 4) | (1 << 2) | 1); |
| while (!(mmio_read_32(CIC_BASE + CIC_STATUS0) & (1 << 2))) |
| ; |
| |
| mmio_write_32(CIC_BASE + CIC_CTRL0, 0x20002); |
| while (!(mmio_read_32(CIC_BASE + CIC_STATUS0) & (1 << 0))) |
| ; |
| |
| ch_count = sdram_params->num_channels; |
| |
| /* LPDDR4 f2 cann't do training, all training will fail */ |
| for (ch = 0; ch < ch_count; ch++) { |
| mmio_clrsetbits_32(PHY_REG(ch, 896), (0x3 << 8) | 1, |
| fn << 8); |
| |
| /* data_training failed */ |
| if (data_training(ch, sdram_params, PI_FULL_TRAINING)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Needs to be done for both channels at once in case of a shared reset signal |
| * between channels. |
| */ |
| static __pmusramfunc int pctl_start(uint32_t channel_mask, |
| struct rk3399_sdram_params *sdram_params) |
| { |
| uint32_t count; |
| uint32_t byte; |
| |
| mmio_setbits_32(CTL_REG(0, 68), PWRUP_SREFRESH_EXIT); |
| mmio_setbits_32(CTL_REG(1, 68), PWRUP_SREFRESH_EXIT); |
| |
| /* need de-access IO retention before controller START */ |
| if (channel_mask & (1 << 0)) |
| mmio_setbits_32(PMU_BASE + PMU_PWRMODE_CON, (1 << 19)); |
| if (channel_mask & (1 << 1)) |
| mmio_setbits_32(PMU_BASE + PMU_PWRMODE_CON, (1 << 23)); |
| |
| /* PHY_DLL_RST_EN */ |
| if (channel_mask & (1 << 0)) |
| mmio_clrsetbits_32(PHY_REG(0, 957), 0x3 << 24, |
| 0x2 << 24); |
| if (channel_mask & (1 << 1)) |
| mmio_clrsetbits_32(PHY_REG(1, 957), 0x3 << 24, |
| 0x2 << 24); |
| |
| /* check ERROR bit */ |
| if (channel_mask & (1 << 0)) { |
| count = 0; |
| while (!(mmio_read_32(CTL_REG(0, 203)) & (1 << 3))) { |
| /* CKE is low, loop 10ms */ |
| if (count > 100) |
| return -1; |
| |
| sram_udelay(100); |
| count++; |
| } |
| |
| mmio_clrbits_32(CTL_REG(0, 68), PWRUP_SREFRESH_EXIT); |
| |
| /* Restore the PHY_RX_CAL_DQS value */ |
| for (byte = 0; byte < 4; byte++) |
| mmio_clrsetbits_32(PHY_REG(0, 57 + 128 * byte), |
| 0xfff << 16, |
| sdram_params->rx_cal_dqs[0][byte]); |
| } |
| if (channel_mask & (1 << 1)) { |
| count = 0; |
| while (!(mmio_read_32(CTL_REG(1, 203)) & (1 << 3))) { |
| /* CKE is low, loop 10ms */ |
| if (count > 100) |
| return -1; |
| |
| sram_udelay(100); |
| count++; |
| } |
| |
| mmio_clrbits_32(CTL_REG(1, 68), PWRUP_SREFRESH_EXIT); |
| |
| /* Restore the PHY_RX_CAL_DQS value */ |
| for (byte = 0; byte < 4; byte++) |
| mmio_clrsetbits_32(PHY_REG(1, 57 + 128 * byte), |
| 0xfff << 16, |
| sdram_params->rx_cal_dqs[1][byte]); |
| } |
| |
| return 0; |
| } |
| |
| __pmusramfunc static void pmusram_restore_pll(int pll_id, uint32_t *src) |
| { |
| mmio_write_32((CRU_BASE + CRU_PLL_CON(pll_id, 3)), PLL_SLOW_MODE); |
| |
| mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 0), src[0] | REG_SOC_WMSK); |
| mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 1), src[1] | REG_SOC_WMSK); |
| mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 2), src[2]); |
| mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 4), src[4] | REG_SOC_WMSK); |
| mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 5), src[5] | REG_SOC_WMSK); |
| |
| mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 3), src[3] | REG_SOC_WMSK); |
| |
| while ((mmio_read_32(CRU_BASE + CRU_PLL_CON(pll_id, 2)) & |
| (1 << 31)) == 0x0) |
| ; |
| } |
| |
| void dmc_suspend(void) |
| { |
| struct rk3399_sdram_params *sdram_params = &sdram_config; |
| struct rk3399_ddr_publ_regs *phy_regs; |
| uint32_t *params_ctl; |
| uint32_t *params_pi; |
| uint32_t refdiv, postdiv2, postdiv1, fbdiv; |
| uint32_t ch, byte, i; |
| |
| phy_regs = &sdram_params->phy_regs; |
| params_ctl = sdram_params->pctl_regs.denali_ctl; |
| params_pi = sdram_params->pi_regs.denali_pi; |
| |
| /* save dpll register and ddr clock register value to pmusram */ |
| cru_clksel_con6 = mmio_read_32(CRU_BASE + CRU_CLKSEL_CON6); |
| for (i = 0; i < PLL_CON_COUNT; i++) |
| dpll_data[i] = mmio_read_32(CRU_BASE + CRU_PLL_CON(DPLL_ID, i)); |
| |
| fbdiv = dpll_data[0] & 0xfff; |
| postdiv2 = POSTDIV2_DEC(dpll_data[1]); |
| postdiv1 = POSTDIV1_DEC(dpll_data[1]); |
| refdiv = REFDIV_DEC(dpll_data[1]); |
| |
| sdram_params->ddr_freq = ((fbdiv * 24) / |
| (refdiv * postdiv1 * postdiv2)) * MHz; |
| |
| INFO("sdram_params->ddr_freq = %d\n", sdram_params->ddr_freq); |
| sdram_params->odt = (((mmio_read_32(PHY_REG(0, 5)) >> 16) & |
| 0x7) != 0) ? 1 : 0; |
| |
| /* copy the registers CTL PI and PHY */ |
| dram_regcpy((uintptr_t)¶ms_ctl[0], CTL_REG(0, 0), CTL_REG_NUM); |
| |
| /* mask DENALI_CTL_00_DATA.START, only copy here, will trigger later */ |
| params_ctl[0] &= ~(0x1 << 0); |
| |
| dram_regcpy((uintptr_t)¶ms_pi[0], PI_REG(0, 0), |
| PI_REG_NUM); |
| |
| /* mask DENALI_PI_00_DATA.START, only copy here, will trigger later*/ |
| params_pi[0] &= ~(0x1 << 0); |
| |
| dram_regcpy((uintptr_t)&phy_regs->phy0[0], |
| PHY_REG(0, 0), 91); |
| |
| for (i = 0; i < 3; i++) |
| dram_regcpy((uintptr_t)&phy_regs->phy512[i][0], |
| PHY_REG(0, 512 + 128 * i), 38); |
| |
| dram_regcpy((uintptr_t)&phy_regs->phy896[0], PHY_REG(0, 896), 63); |
| |
| for (ch = 0; ch < sdram_params->num_channels; ch++) { |
| for (byte = 0; byte < 4; byte++) |
| sdram_params->rx_cal_dqs[ch][byte] = (0xfff << 16) & |
| mmio_read_32(PHY_REG(ch, 57 + byte * 128)); |
| } |
| |
| /* set DENALI_PHY_957_DATA.PHY_DLL_RST_EN = 0x1 */ |
| phy_regs->phy896[957 - 896] &= ~(0x3 << 24); |
| phy_regs->phy896[957 - 896] |= 1 << 24; |
| phy_regs->phy896[0] |= 1; |
| phy_regs->phy896[0] &= ~(0x3 << 8); |
| } |
| |
| __pmusramfunc void dmc_resume(void) |
| { |
| struct rk3399_sdram_params *sdram_params = &sdram_config; |
| uint32_t channel_mask = 0; |
| uint32_t channel; |
| |
| sram_secure_timer_init(); |
| |
| /* |
| * we switch ddr clock to abpll when suspend, |
| * we set back to dpll here |
| */ |
| mmio_write_32(CRU_BASE + CRU_CLKSEL_CON6, |
| cru_clksel_con6 | REG_SOC_WMSK); |
| pmusram_restore_pll(DPLL_ID, dpll_data); |
| |
| configure_sgrf(); |
| |
| retry: |
| for (channel = 0; channel < sdram_params->num_channels; channel++) { |
| phy_pctrl_reset(channel); |
| pctl_cfg(channel, sdram_params); |
| } |
| |
| for (channel = 0; channel < 2; channel++) { |
| if (sdram_params->ch[channel].col) |
| channel_mask |= 1 << channel; |
| } |
| |
| if (pctl_start(channel_mask, sdram_params) < 0) |
| goto retry; |
| |
| for (channel = 0; channel < sdram_params->num_channels; channel++) { |
| /* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */ |
| if (sdram_params->dramtype == LPDDR3) |
| sram_udelay(10); |
| |
| /* If traning fail, retry to do it again. */ |
| if (data_training(channel, sdram_params, PI_FULL_TRAINING)) |
| goto retry; |
| |
| set_ddrconfig(sdram_params, channel, |
| sdram_params->ch[channel].ddrconfig); |
| } |
| |
| dram_all_config(sdram_params); |
| |
| /* Switch to index 1 and prepare for DDR frequency switch. */ |
| dram_switch_to_next_index(sdram_params); |
| } |