blob: f28a6ff75f1572c78456485dc3bb7a2d4d060ead [file] [log] [blame]
#
# Copyright (c) 2013-2022, Arm Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
include common/fdt_wrappers.mk
# Use the GICv3 driver on the FVP by default
FVP_USE_GIC_DRIVER := FVP_GICV3
# Default cluster count for FVP
FVP_CLUSTER_COUNT := 2
# Default number of CPUs per cluster on FVP
FVP_MAX_CPUS_PER_CLUSTER := 4
# Default number of threads per CPU on FVP
FVP_MAX_PE_PER_CPU := 1
# Disable redistributor frame of inactive/fused CPU cores by marking it as read
# only; enable redistributor frames of all CPU cores by default.
FVP_GICR_REGION_PROTECTION := 0
FVP_DT_PREFIX := fvp-base-gicv3-psci
# The FVP platform depends on this macro to build with correct GIC driver.
$(eval $(call add_define,FVP_USE_GIC_DRIVER))
# Pass FVP_CLUSTER_COUNT to the build system.
$(eval $(call add_define,FVP_CLUSTER_COUNT))
# Pass FVP_MAX_CPUS_PER_CLUSTER to the build system.
$(eval $(call add_define,FVP_MAX_CPUS_PER_CLUSTER))
# Pass FVP_MAX_PE_PER_CPU to the build system.
$(eval $(call add_define,FVP_MAX_PE_PER_CPU))
# Pass FVP_GICR_REGION_PROTECTION to the build system.
$(eval $(call add_define,FVP_GICR_REGION_PROTECTION))
# Sanity check the cluster count and if FVP_CLUSTER_COUNT <= 2,
# choose the CCI driver , else the CCN driver
ifeq ($(FVP_CLUSTER_COUNT), 0)
$(error "Incorrect cluster count specified for FVP port")
else ifeq ($(FVP_CLUSTER_COUNT),$(filter $(FVP_CLUSTER_COUNT),1 2))
FVP_INTERCONNECT_DRIVER := FVP_CCI
else
FVP_INTERCONNECT_DRIVER := FVP_CCN
endif
$(eval $(call add_define,FVP_INTERCONNECT_DRIVER))
# Choose the GIC sources depending upon the how the FVP will be invoked
ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV3)
# The GIC model (GIC-600 or GIC-500) will be detected at runtime
GICV3_SUPPORT_GIC600 := 1
GICV3_OVERRIDE_DISTIF_PWR_OPS := 1
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
FVP_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c \
plat/arm/common/arm_gicv3.c
ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_BL31} ${RESET_TO_SP_MIN}),)
FVP_GIC_SOURCES += plat/arm/board/fvp/fvp_gicv3.c
endif
else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV2)
# No GICv4 extension
GIC_ENABLE_V4_EXTN := 0
$(eval $(call add_define,GIC_ENABLE_V4_EXTN))
# Include GICv2 driver files
include drivers/arm/gic/v2/gicv2.mk
FVP_GIC_SOURCES := ${GICV2_SOURCES} \
plat/common/plat_gicv2.c \
plat/arm/common/arm_gicv2.c
FVP_DT_PREFIX := fvp-base-gicv2-psci
else
$(error "Incorrect GIC driver chosen on FVP port")
endif
ifeq (${FVP_INTERCONNECT_DRIVER}, FVP_CCI)
FVP_INTERCONNECT_SOURCES := drivers/arm/cci/cci.c
else ifeq (${FVP_INTERCONNECT_DRIVER}, FVP_CCN)
FVP_INTERCONNECT_SOURCES := drivers/arm/ccn/ccn.c \
plat/arm/common/arm_ccn.c
else
$(error "Incorrect CCN driver chosen on FVP port")
endif
FVP_SECURITY_SOURCES := drivers/arm/tzc/tzc400.c \
plat/arm/board/fvp/fvp_security.c \
plat/arm/common/arm_tzc400.c
PLAT_INCLUDES := -Iplat/arm/board/fvp/include
PLAT_BL_COMMON_SOURCES := plat/arm/board/fvp/fvp_common.c
FVP_CPU_LIBS := lib/cpus/${ARCH}/aem_generic.S
ifeq (${ARCH}, aarch64)
# select a different set of CPU files, depending on whether we compile for
# hardware assisted coherency cores or not
ifeq (${HW_ASSISTED_COHERENCY}, 0)
# Cores used without DSU
FVP_CPU_LIBS += lib/cpus/aarch64/cortex_a35.S \
lib/cpus/aarch64/cortex_a53.S \
lib/cpus/aarch64/cortex_a57.S \
lib/cpus/aarch64/cortex_a72.S \
lib/cpus/aarch64/cortex_a73.S
else
# Cores used with DSU only
ifeq (${CTX_INCLUDE_AARCH32_REGS}, 0)
# AArch64-only cores
FVP_CPU_LIBS += lib/cpus/aarch64/cortex_a76.S \
lib/cpus/aarch64/cortex_a76ae.S \
lib/cpus/aarch64/cortex_a77.S \
lib/cpus/aarch64/cortex_a78.S \
lib/cpus/aarch64/neoverse_n_common.S \
lib/cpus/aarch64/neoverse_n1.S \
lib/cpus/aarch64/neoverse_n2.S \
lib/cpus/aarch64/neoverse_e1.S \
lib/cpus/aarch64/neoverse_v1.S \
lib/cpus/aarch64/neoverse_v2.S \
lib/cpus/aarch64/cortex_a78_ae.S \
lib/cpus/aarch64/cortex_a510.S \
lib/cpus/aarch64/cortex_a710.S \
lib/cpus/aarch64/cortex_a715.S \
lib/cpus/aarch64/cortex_x3.S \
lib/cpus/aarch64/cortex_a65.S \
lib/cpus/aarch64/cortex_a65ae.S \
lib/cpus/aarch64/cortex_a78c.S \
lib/cpus/aarch64/cortex_hayes.S \
lib/cpus/aarch64/cortex_hunter.S \
lib/cpus/aarch64/cortex_hunter_elp_arm.S \
lib/cpus/aarch64/cortex_x2.S \
lib/cpus/aarch64/neoverse_poseidon.S
endif
# AArch64/AArch32 cores
FVP_CPU_LIBS += lib/cpus/aarch64/cortex_a55.S \
lib/cpus/aarch64/cortex_a75.S
endif
else
FVP_CPU_LIBS += lib/cpus/aarch32/cortex_a32.S
endif
BL1_SOURCES += drivers/arm/smmu/smmu_v3.c \
drivers/arm/sp805/sp805.c \
drivers/delay_timer/delay_timer.c \
drivers/io/io_semihosting.c \
lib/semihosting/semihosting.c \
lib/semihosting/${ARCH}/semihosting_call.S \
plat/arm/board/fvp/${ARCH}/fvp_helpers.S \
plat/arm/board/fvp/fvp_bl1_setup.c \
plat/arm/board/fvp/fvp_err.c \
plat/arm/board/fvp/fvp_io_storage.c \
${FVP_CPU_LIBS} \
${FVP_INTERCONNECT_SOURCES}
ifeq (${USE_SP804_TIMER},1)
BL1_SOURCES += drivers/arm/sp804/sp804_delay_timer.c
else
BL1_SOURCES += drivers/delay_timer/generic_delay_timer.c
endif
BL2_SOURCES += drivers/arm/sp805/sp805.c \
drivers/io/io_semihosting.c \
lib/utils/mem_region.c \
lib/semihosting/semihosting.c \
lib/semihosting/${ARCH}/semihosting_call.S \
plat/arm/board/fvp/fvp_bl2_setup.c \
plat/arm/board/fvp/fvp_err.c \
plat/arm/board/fvp/fvp_io_storage.c \
plat/arm/common/arm_nor_psci_mem_protect.c \
${FVP_SECURITY_SOURCES}
ifeq (${COT_DESC_IN_DTB},1)
BL2_SOURCES += plat/arm/common/fconf/fconf_nv_cntr_getter.c
endif
ifeq (${ENABLE_RME},1)
BL2_SOURCES += plat/arm/board/fvp/aarch64/fvp_helpers.S
BL31_SOURCES += plat/arm/board/fvp/fvp_plat_attest_token.c \
plat/arm/board/fvp/fvp_realm_attest_key.c
endif
ifeq (${ENABLE_FEAT_RNG_TRAP},1)
BL31_SOURCES += plat/arm/board/fvp/fvp_sync_traps.c
endif
ifeq (${BL2_AT_EL3},1)
BL2_SOURCES += plat/arm/board/fvp/${ARCH}/fvp_helpers.S \
plat/arm/board/fvp/fvp_bl2_el3_setup.c \
${FVP_CPU_LIBS} \
${FVP_INTERCONNECT_SOURCES}
endif
ifeq (${USE_SP804_TIMER},1)
BL2_SOURCES += drivers/arm/sp804/sp804_delay_timer.c
endif
BL2U_SOURCES += plat/arm/board/fvp/fvp_bl2u_setup.c \
${FVP_SECURITY_SOURCES}
ifeq (${USE_SP804_TIMER},1)
BL2U_SOURCES += drivers/arm/sp804/sp804_delay_timer.c
endif
BL31_SOURCES += drivers/arm/fvp/fvp_pwrc.c \
drivers/arm/smmu/smmu_v3.c \
drivers/delay_timer/delay_timer.c \
drivers/cfi/v2m/v2m_flash.c \
lib/utils/mem_region.c \
plat/arm/board/fvp/fvp_bl31_setup.c \
plat/arm/board/fvp/fvp_console.c \
plat/arm/board/fvp/fvp_pm.c \
plat/arm/board/fvp/fvp_topology.c \
plat/arm/board/fvp/aarch64/fvp_helpers.S \
plat/arm/common/arm_nor_psci_mem_protect.c \
${FVP_CPU_LIBS} \
${FVP_GIC_SOURCES} \
${FVP_INTERCONNECT_SOURCES} \
${FVP_SECURITY_SOURCES}
# Support for fconf in BL31
# Added separately from the above list for better readability
ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_BL31}),)
BL31_SOURCES += lib/fconf/fconf.c \
lib/fconf/fconf_dyn_cfg_getter.c \
plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
BL31_SOURCES += ${FDT_WRAPPERS_SOURCES}
ifeq (${SEC_INT_DESC_IN_FCONF},1)
BL31_SOURCES += plat/arm/common/fconf/fconf_sec_intr_config.c
endif
endif
ifeq (${USE_SP804_TIMER},1)
BL31_SOURCES += drivers/arm/sp804/sp804_delay_timer.c
else
BL31_SOURCES += drivers/delay_timer/generic_delay_timer.c
endif
# Add the FDT_SOURCES and options for Dynamic Config (only for Unix env)
ifdef UNIX_MK
FVP_HW_CONFIG_DTS := fdts/${FVP_DT_PREFIX}.dts
FDT_SOURCES += $(addprefix plat/arm/board/fvp/fdts/, \
${PLAT}_fw_config.dts \
${PLAT}_tb_fw_config.dts \
${PLAT}_soc_fw_config.dts \
${PLAT}_nt_fw_config.dts \
)
FVP_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
FVP_TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
FVP_SOC_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_soc_fw_config.dtb
FVP_NT_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb
ifeq (${SPD},tspd)
FDT_SOURCES += plat/arm/board/fvp/fdts/${PLAT}_tsp_fw_config.dts
FVP_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tsp_fw_config.dtb
# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TOS_FW_CONFIG},--tos-fw-config,${FVP_TOS_FW_CONFIG}))
endif
ifeq (${SPD},spmd)
ifeq ($(ARM_SPMC_MANIFEST_DTS),)
ARM_SPMC_MANIFEST_DTS := plat/arm/board/fvp/fdts/${PLAT}_spmc_manifest.dts
endif
FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS}
FVP_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb
# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TOS_FW_CONFIG},--tos-fw-config,${FVP_TOS_FW_CONFIG}))
endif
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_FW_CONFIG},--fw-config,${FVP_FW_CONFIG}))
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config,${FVP_TB_FW_CONFIG}))
# Add the SOC_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_SOC_FW_CONFIG},--soc-fw-config,${FVP_SOC_FW_CONFIG}))
# Add the NT_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_NT_FW_CONFIG},--nt-fw-config,${FVP_NT_FW_CONFIG}))
FDT_SOURCES += ${FVP_HW_CONFIG_DTS}
$(eval FVP_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(FVP_HW_CONFIG_DTS)))
# Add the HW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config,${FVP_HW_CONFIG}))
endif
# Enable Activity Monitor Unit extensions by default
ENABLE_AMU := 1
# Enable dynamic mitigation support by default
DYNAMIC_WORKAROUND_CVE_2018_3639 := 1
ifeq (${ENABLE_AMU},1)
BL31_SOURCES += lib/cpus/aarch64/cpuamu.c \
lib/cpus/aarch64/cpuamu_helpers.S
ifeq (${HW_ASSISTED_COHERENCY}, 1)
BL31_SOURCES += lib/cpus/aarch64/cortex_a75_pubsub.c \
lib/cpus/aarch64/neoverse_n1_pubsub.c
endif
endif
ifeq (${RAS_EXTENSION},1)
BL31_SOURCES += plat/arm/board/fvp/aarch64/fvp_ras.c
endif
ifneq (${ENABLE_STACK_PROTECTOR},0)
PLAT_BL_COMMON_SOURCES += plat/arm/board/fvp/fvp_stack_protector.c
endif
ifeq (${ARCH},aarch32)
NEED_BL32 := yes
endif
# Enable the dynamic translation tables library.
ifeq ($(filter 1,${BL2_AT_EL3} ${ARM_XLAT_TABLES_LIB_V1}),)
ifeq (${ARCH},aarch32)
BL32_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC
else # AArch64
BL31_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC
endif
endif
ifeq (${ALLOW_RO_XLAT_TABLES}, 1)
ifeq (${ARCH},aarch32)
BL32_CPPFLAGS += -DPLAT_RO_XLAT_TABLES
else # AArch64
BL31_CPPFLAGS += -DPLAT_RO_XLAT_TABLES
ifeq (${SPD},tspd)
BL32_CPPFLAGS += -DPLAT_RO_XLAT_TABLES
endif
endif
endif
ifeq (${USE_DEBUGFS},1)
BL31_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC
endif
# Add support for platform supplied linker script for BL31 build
$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT))
ifneq (${BL2_AT_EL3}, 0)
override BL1_SOURCES =
endif
# Include Measured Boot makefile before any Crypto library makefile.
# Crypto library makefile may need default definitions of Measured Boot build
# flags present in Measured Boot makefile.
ifeq (${MEASURED_BOOT},1)
RSS_MEASURED_BOOT_MK := drivers/measured_boot/rss/rss_measured_boot.mk
$(info Including ${RSS_MEASURED_BOOT_MK})
include ${RSS_MEASURED_BOOT_MK}
ifneq (${MBOOT_RSS_HASH_ALG}, sha256)
$(eval $(call add_define,TF_MBEDTLS_MBOOT_USE_SHA512))
endif
BL1_SOURCES += ${MEASURED_BOOT_SOURCES}
BL2_SOURCES += ${MEASURED_BOOT_SOURCES}
endif
include plat/arm/board/common/board_common.mk
include plat/arm/common/arm_common.mk
ifeq (${MEASURED_BOOT},1)
BL1_SOURCES += plat/arm/board/fvp/fvp_common_measured_boot.c \
plat/arm/board/fvp/fvp_bl1_measured_boot.c \
lib/psa/measured_boot.c
BL2_SOURCES += plat/arm/board/fvp/fvp_common_measured_boot.c \
plat/arm/board/fvp/fvp_bl2_measured_boot.c \
lib/psa/measured_boot.c
# Note that attestation code does not depend on measured boot interfaces per se,
# but the two features go together - attestation without boot measurements is
# pretty much pointless...
BL31_SOURCES += lib/psa/delegated_attestation.c
PLAT_INCLUDES += -Iinclude/lib/psa
# RSS is not supported on FVP right now. Thus, we use the mocked version
# of the provided PSA APIs. They return with success and hard-coded data.
PLAT_RSS_NOT_SUPPORTED := 1
# Even though RSS is not supported on FVP (see above), we support overriding
# PLAT_RSS_NOT_SUPPORTED from the command line, just for the purpose of building
# the code to detect any build regressions. The resulting firmware will not be
# functional.
ifneq (${PLAT_RSS_NOT_SUPPORTED},1)
$(warning "RSS is not supported on FVP. The firmware will not be functional.")
include drivers/arm/rss/rss_comms.mk
BL1_SOURCES += ${RSS_COMMS_SOURCES}
BL2_SOURCES += ${RSS_COMMS_SOURCES}
BL31_SOURCES += ${RSS_COMMS_SOURCES} \
lib/psa/delegated_attestation.c
BL1_CFLAGS += -DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0
BL2_CFLAGS += -DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0
BL31_CFLAGS += -DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0
endif
endif
ifeq (${DRTM_SUPPORT}, 1)
BL31_SOURCES += plat/arm/board/fvp/fvp_drtm_addr.c \
plat/arm/board/fvp/fvp_drtm_dma_prot.c \
plat/arm/board/fvp/fvp_drtm_err.c \
plat/arm/board/fvp/fvp_drtm_measurement.c \
plat/arm/board/fvp/fvp_drtm_stub.c \
plat/arm/common/arm_dyn_cfg.c \
plat/arm/board/fvp/fvp_err.c
endif
ifeq (${TRUSTED_BOARD_BOOT}, 1)
BL1_SOURCES += plat/arm/board/fvp/fvp_trusted_boot.c
BL2_SOURCES += plat/arm/board/fvp/fvp_trusted_boot.c
# FVP being a development platform, enable capability to disable Authentication
# dynamically if TRUSTED_BOARD_BOOT is set.
DYN_DISABLE_AUTH := 1
endif
# enable trace buffer control registers access to NS by default
ENABLE_TRBE_FOR_NS := 1
# enable branch record buffer control registers access in NS by default
# only enable for aarch64
# do not enable when ENABLE_RME=1
ifeq (${ARCH}, aarch64)
ifeq (${ENABLE_RME},0)
ENABLE_BRBE_FOR_NS := 1
endif
endif
# enable trace system registers access to NS by default
ENABLE_SYS_REG_TRACE_FOR_NS := 1
# enable trace filter control registers access to NS by default
ENABLE_TRF_FOR_NS := 1
ifeq (${SPMC_AT_EL3}, 1)
PLAT_BL_COMMON_SOURCES += plat/arm/board/fvp/fvp_el3_spmc.c
endif