blob: 9d7f0e4218fbda8eeee00b01fe806a08cd4ae3bb [file] [log] [blame]
/*
* Copyright (c) 2014-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common/debug.h>
#include <drivers/arm/nic_400.h>
#include <lib/mmio.h>
#include <platform_def.h>
#include <plat/arm/common/plat_arm.h>
#include <plat/arm/soc/common/soc_css.h>
#include "juno_tzmp1_def.h"
#ifdef JUNO_TZMP1
/*
* Protect buffer for VPU/GPU/DPU memory usage with hardware protection
* enabled. Propose 224MB video output, 96 MB video input and 32MB video
* private.
*
* Ind Memory Range Caption S_ATTR NS_ATTR
* 1 0x080000000 - 0x0E7FFFFFF ARM_NS_DRAM1 NONE RDWR | MEDIA_RW
* 2 0x0E8000000 - 0x0F5FFFFFF JUNO_MEDIA_TZC_PROT_DRAM1 NONE MEDIA_RW | AP_WR
* 3 0x0F6000000 - 0x0FBFFFFFF JUNO_VPU_TZC_PROT_DRAM1 RDWR VPU_PROT_RW
* 4 0x0FC000000 - 0x0FDFFFFFF JUNO_VPU_TZC_PRIV_DRAM1 RDWR VPU_PRIV_RW
* 5 0x0FE000000 - 0x0FEFFFFFF JUNO_AP_TZC_SHARE_DRAM1 NONE RDWR | MEDIA_RW
* 6 0x0FF000000 - 0x0FFFFFFFF ARM_AP_TZC_DRAM1 RDWR NONE
* 7 0x880000000 - 0x9FFFFFFFF ARM_DRAM2 NONE RDWR | MEDIA_RW
*
* Memory regions are neighbored to save limited TZC regions. Calculation
* started from ARM_TZC_SHARE_DRAM1 since it is known and fixed for both
* protected-enabled and protected-disabled settings.
*
* Video private buffer aheads of ARM_TZC_SHARE_DRAM1
*/
static const arm_tzc_regions_info_t juno_tzmp1_tzc_regions[] = {
{ARM_AP_TZC_DRAM1_BASE, ARM_AP_TZC_DRAM1_END, TZC_REGION_S_RDWR, 0},
{JUNO_NS_DRAM1_PT1_BASE, JUNO_NS_DRAM1_PT1_END,
TZC_REGION_S_NONE, JUNO_MEDIA_TZC_NS_DEV_ACCESS},
{JUNO_MEDIA_TZC_PROT_DRAM1_BASE, JUNO_MEDIA_TZC_PROT_DRAM1_END,
TZC_REGION_S_NONE, JUNO_MEDIA_TZC_PROT_ACCESS},
{JUNO_VPU_TZC_PROT_DRAM1_BASE, JUNO_VPU_TZC_PROT_DRAM1_END,
TZC_REGION_S_RDWR, JUNO_VPU_TZC_PROT_ACCESS},
{JUNO_VPU_TZC_PRIV_DRAM1_BASE, JUNO_VPU_TZC_PRIV_DRAM1_END,
TZC_REGION_S_RDWR, JUNO_VPU_TZC_PRIV_ACCESS},
{JUNO_AP_TZC_SHARE_DRAM1_BASE, JUNO_AP_TZC_SHARE_DRAM1_END,
TZC_REGION_S_NONE, JUNO_MEDIA_TZC_NS_DEV_ACCESS},
{ARM_DRAM2_BASE, ARM_DRAM2_END,
TZC_REGION_S_NONE, JUNO_MEDIA_TZC_NS_DEV_ACCESS},
{},
};
/*******************************************************************************
* Program dp650 to configure NSAID value for protected mode.
******************************************************************************/
static void init_dp650(void)
{
mmio_write_32(DP650_BASE + DP650_PROT_NSAID_OFFSET,
DP650_PROT_NSAID_CONFIG);
}
/*******************************************************************************
* Program v550 to configure NSAID value for protected mode.
******************************************************************************/
static void init_v550(void)
{
/*
* bits[31:28] is for PRIVATE,
* bits[27:24] is for OUTBUF,
* bits[23:20] is for PROTECTED.
*/
mmio_write_32(V550_BASE + V550_PROTCTRL_OFFSET, V550_PROTCTRL_CONFIG);
}
#endif /* JUNO_TZMP1 */
/*******************************************************************************
* Set up the MMU-401 SSD tables. The power-on configuration has all stream IDs
* assigned to Non-Secure except some for the DMA-330. Assign those back to the
* Non-Secure world as well, otherwise EL1 may end up erroneously generating
* (untranslated) Secure transactions if it turns the SMMU on.
******************************************************************************/
static void init_mmu401(void)
{
uint32_t reg = mmio_read_32(MMU401_DMA330_BASE + MMU401_SSD_OFFSET);
reg |= 0x1FF;
mmio_write_32(MMU401_DMA330_BASE + MMU401_SSD_OFFSET, reg);
}
/*******************************************************************************
* Program CSS-NIC400 to allow non-secure access to some CSS regions.
******************************************************************************/
static void css_init_nic400(void)
{
/* Note: This is the NIC-400 device on the CSS */
mmio_write_32(PLAT_SOC_CSS_NIC400_BASE +
NIC400_ADDR_CTRL_SECURITY_REG(CSS_NIC400_SLAVE_BOOTSECURE),
~0);
}
/*******************************************************************************
* Initialize debug configuration.
******************************************************************************/
static void init_debug_cfg(void)
{
#if !DEBUG
/* Set internal drive selection for SPIDEN. */
mmio_write_32(SSC_REG_BASE + SSC_DBGCFG_SET,
1U << SPIDEN_SEL_SET_SHIFT);
/* Drive SPIDEN LOW to disable invasive debug of secure state. */
mmio_write_32(SSC_REG_BASE + SSC_DBGCFG_CLR,
1U << SPIDEN_INT_CLR_SHIFT);
#endif
}
/*******************************************************************************
* Initialize the secure environment.
******************************************************************************/
void plat_arm_security_setup(void)
{
/* Initialize debug configuration */
init_debug_cfg();
/* Initialize the TrustZone Controller */
#ifdef JUNO_TZMP1
arm_tzc400_setup(juno_tzmp1_tzc_regions);
INFO("TZC protected shared memory base address for TZMP usecase: %p\n",
(void *)JUNO_AP_TZC_SHARE_DRAM1_BASE);
INFO("TZC protected shared memory end address for TZMP usecase: %p\n",
(void *)JUNO_AP_TZC_SHARE_DRAM1_END);
#else
arm_tzc400_setup(NULL);
#endif
/* Do ARM CSS internal NIC setup */
css_init_nic400();
/* Do ARM CSS SoC security setup */
soc_css_security_setup();
/* Initialize the SMMU SSD tables */
init_mmu401();
#ifdef JUNO_TZMP1
init_dp650();
init_v550();
#endif
}