| /* |
| * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * Neither the name of ARM nor the names of its contributors may be used |
| * to endorse or promote products derived from this software without specific |
| * prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __PLATFORM_DEF_H__ |
| #define __PLATFORM_DEF_H__ |
| |
| #define PLAT_PRIMARY_CPU 0x0 |
| |
| /* Special value used to verify platform parameters from BL2 to BL3-1 */ |
| #define MT_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL |
| |
| #define IO_PHYS (0x10000000) |
| #define INFRACFG_AO_BASE (IO_PHYS + 0x1000) |
| #define MCUCFG_BASE (IO_PHYS + 0x200000) |
| #define PERI_BASE (IO_PHYS + 0x1000000) |
| |
| |
| #define GPIO_BASE (IO_PHYS + 0x370000) |
| #define SPM_BASE (IO_PHYS + 0x6000) |
| #define RGU_BASE (MCUCFG_BASE + 0x11000) |
| #define PMIC_WRAP_BASE (IO_PHYS + 0x10000) |
| |
| #define TRNG_base (MCUCFG_BASE + 0x230000) |
| #define MT_GIC_BASE (0x10220000) |
| #define MCU_SYS_SIZE (0x700000) |
| #define PLAT_MT_CCI_BASE (IO_PHYS + 0x390000) |
| |
| /* Aggregate of all devices in the first GB */ |
| #define MTK_DEV_RNG0_BASE IO_PHYS |
| #define MTK_DEV_RNG0_SIZE 0x400000 |
| #define MTK_DEV_RNG1_BASE (PERI_BASE) |
| #define MTK_DEV_RNG1_SIZE 0x4000000 |
| |
| /******************************************************************************* |
| * UART related constants |
| ******************************************************************************/ |
| #define UART0_BASE (PERI_BASE + 0x2000) |
| |
| #define UART_BAUDRATE (921600) |
| #define UART_CLOCK (26000000) |
| |
| /******************************************************************************* |
| * System counter frequency related constants |
| ******************************************************************************/ |
| #define SYS_COUNTER_FREQ_IN_TICKS 13000000 |
| #define SYS_COUNTER_FREQ_IN_MHZ (SYS_COUNTER_FREQ_IN_TICKS/1000000) |
| |
| /******************************************************************************* |
| * GIC-400 & interrupt handling related constants |
| ******************************************************************************/ |
| |
| /* Base MTK_platform compatible GIC memory map */ |
| #define BASE_GICD_BASE (MT_GIC_BASE+0x1000) |
| #define BASE_GICC_BASE (MT_GIC_BASE + 0x2000) |
| #define BASE_GICR_BASE (MT_GIC_BASE + 0x200000) |
| #define BASE_GICH_BASE (MT_GIC_BASE + 0x4000) |
| #define BASE_GICV_BASE (MT_GIC_BASE + 0x6000) |
| |
| #define INT_POL_CTL0 0x10200620 |
| #define GIC_PRIVATE_SIGNALS (32) |
| |
| /******************************************************************************* |
| * CCI-400 related constants |
| ******************************************************************************/ |
| #define PLAT_MT_CCI_CLUSTER0_SL_IFACE_IX 4 |
| #define PLAT_MT_CCI_CLUSTER1_SL_IFACE_IX 3 |
| |
| /******************************************************************************* |
| * WDT Registers |
| ******************************************************************************/ |
| #define MTK_WDT_BASE (RGU_BASE) |
| #define MTK_WDT_SIZE (0x1000) |
| #define MTK_WDT_MODE (MTK_WDT_BASE+0x0000) |
| #define MTK_WDT_LENGTH (MTK_WDT_BASE+0x0004) |
| #define MTK_WDT_RESTART (MTK_WDT_BASE+0x0008) |
| #define MTK_WDT_STATUS (MTK_WDT_BASE+0x000C) |
| #define MTK_WDT_INTERVAL (MTK_WDT_BASE+0x0010) |
| #define MTK_WDT_SWRST (MTK_WDT_BASE+0x0014) |
| #define MTK_WDT_SWSYSRST (MTK_WDT_BASE+0x0018) |
| #define MTK_WDT_NONRST_REG (MTK_WDT_BASE+0x0020) |
| #define MTK_WDT_NONRST_REG2 (MTK_WDT_BASE+0x0024) |
| #define MTK_WDT_REQ_MODE (MTK_WDT_BASE+0x0030) |
| #define MTK_WDT_REQ_IRQ_EN (MTK_WDT_BASE+0x0034) |
| #define MTK_WDT_DEBUG_CTL (MTK_WDT_BASE+0x0040) |
| |
| /*WDT_STATUS*/ |
| #define MTK_WDT_STATUS_HWWDT_RST (0x80000000) |
| #define MTK_WDT_STATUS_SWWDT_RST (0x40000000) |
| #define MTK_WDT_STATUS_IRQWDT_RST (0x20000000) |
| #define MTK_WDT_STATUS_DEBUGWDT_RST (0x00080000) |
| #define MTK_WDT_STATUS_SPMWDT_RST (0x0002) |
| #define MTK_WDT_STATUS_SPM_THERMAL_RST (0x0001) |
| #define MTK_WDT_STATUS_THERMAL_DIRECT_RST (1<<18) |
| #define MTK_WDT_STATUS_SECURITY_RST (1<<28) |
| |
| #define MTK_WDT_MODE_DUAL_MODE 0x0040 |
| #define MTK_WDT_MODE_IRQ 0x0008 |
| #define MTK_WDT_MODE_KEY 0x22000000 |
| #define MTK_WDT_MODE_EXTEN 0x0004 |
| #define MTK_WDT_SWRST_KEY 0x1209 |
| #define MTK_WDT_RESTART_KEY (0x1971) |
| |
| /* FIQ platform related define */ |
| #define MT_IRQ_SEC_SGI_0 8 |
| #define MT_IRQ_SEC_SGI_1 9 |
| #define MT_IRQ_SEC_SGI_2 10 |
| #define MT_IRQ_SEC_SGI_3 11 |
| #define MT_IRQ_SEC_SGI_4 12 |
| #define MT_IRQ_SEC_SGI_5 13 |
| #define MT_IRQ_SEC_SGI_6 14 |
| #define MT_IRQ_SEC_SGI_7 15 |
| |
| #define FIQ_SMP_CALL_SGI MT_IRQ_SEC_SGI_5 |
| |
| #define PLAT_ARM_G0_IRQS FIQ_SMP_CALL_SGI |
| |
| #define DEBUG_XLAT_TABLE 0 |
| |
| /******************************************************************************* |
| * Platform binary types for linking |
| ******************************************************************************/ |
| #define PLATFORM_LINKER_FORMAT "elf64-littleaarch64" |
| #define PLATFORM_LINKER_ARCH aarch64 |
| |
| /******************************************************************************* |
| * Generic platform constants |
| ******************************************************************************/ |
| |
| /* Size of cacheable stacks */ |
| #if DEBUG_XLAT_TABLE |
| #define PLATFORM_STACK_SIZE 0x800 |
| #elif defined(IMAGE_BL1) |
| #define PLATFORM_STACK_SIZE 0x440 |
| #elif defined(IMAGE_BL2) |
| #define PLATFORM_STACK_SIZE 0x400 |
| #elif defined(IMAGE_BL31) |
| #define PLATFORM_STACK_SIZE 0x800 |
| #elif defined(IMAGE_BL32) |
| #define PLATFORM_STACK_SIZE 0x440 |
| #endif |
| |
| #define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n" |
| #if ENABLE_PLAT_COMPAT |
| #define PLATFORM_MAX_AFFLVL MPIDR_AFFLVL2 |
| #else |
| #define PLAT_MAX_PWR_LVL 2 /* MPIDR_AFFLVL2 */ |
| #endif |
| |
| #define PLATFORM_CACHE_LINE_SIZE 64 |
| #define PLATFORM_SYSTEM_COUNT 1 |
| #define PLATFORM_CLUSTER_COUNT 2 |
| #define PLATFORM_CLUSTER0_CORE_COUNT 4 |
| #define PLATFORM_CLUSTER1_CORE_COUNT 4 |
| #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \ |
| PLATFORM_CLUSTER0_CORE_COUNT) |
| #define PLATFORM_MAX_CPUS_PER_CLUSTER 4 |
| #define PLATFORM_NUM_AFFS (PLATFORM_SYSTEM_COUNT + \ |
| PLATFORM_CLUSTER_COUNT + \ |
| PLATFORM_CORE_COUNT) |
| |
| /******************************************************************************* |
| * Platform memory map related constants |
| ******************************************************************************/ |
| /* ATF Argument */ |
| #define ATF_ARG_SIZE (0x800) |
| |
| /* TF txet, ro, rw, internal SRAM, Size: release: 80KB, debug: 92KB */ |
| #define TZRAM_BASE (0x110000) |
| #if DEBUG |
| #define TZRAM_SIZE (0x1C400) |
| #else |
| #define TZRAM_SIZE (0x1C400) |
| #endif |
| #define TZRAM2_BASE 0x00100000 |
| #define TZRAM2_SIZE 0xDC00 |
| #define TZRAM2_LIMIT (TZRAM2_BASE + TZRAM2_SIZE) |
| |
| #define RAM_CONSOLE_BASE 0x0012D000 |
| #define RAM_CONSOLE_SIZE 0x00001000 |
| /******************************************************************************* |
| * BL31 specific defines. |
| ******************************************************************************/ |
| /* |
| * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if |
| * present). BL31_BASE is calculated using the current BL3-1 debug size plus a |
| * little space for growth. |
| */ |
| #define BL31_BASE (TZRAM_BASE + 0x1000) |
| #define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE) |
| #define BSS1_STACK_LIMIT (TZRAM_BASE + TZRAM_SIZE) |
| #define BL31_TZRAM_SIZE (TZRAM_SIZE - ATF_ARG_SIZE) |
| |
| /******************************************************************************* |
| * Platform specific page table and MMU setup constants |
| ******************************************************************************/ |
| #define ADDR_SPACE_SIZE (1ull << 32) |
| #define MAX_XLAT_TABLES 7 |
| #define MAX_MMAP_REGIONS 16 |
| |
| |
| /******************************************************************************* |
| * CCI-400 related constants |
| ******************************************************************************/ |
| #define CCI400_BASE 0x10390000 |
| #define CCI400_SL_IFACE_CLUSTER0 4 |
| #define CCI400_SL_IFACE_CLUSTER1 3 |
| #define CCI400_SL_IFACE_INDEX(mpidr) (mpidr & MPIDR_CLUSTER_MASK ? \ |
| CCI400_SL_IFACE_CLUSTER1 : \ |
| CCI400_SL_IFACE_CLUSTER0) |
| #define CCI_SEC_ACCESS_OFFSET (0x8) |
| |
| |
| /******************************************************************************* |
| * Declarations and constants to access the mailboxes safely. Each mailbox is |
| * aligned on the biggest cache line size in the platform. This is known only |
| * to the platform as it might have a combination of integrated and external |
| * caches. Such alignment ensures that two maiboxes do not sit on the same cache |
| * line at any cache level. They could belong to different cpus/clusters & |
| * get written while being protected by different locks causing corruption of |
| * a valid mailbox address. |
| ******************************************************************************/ |
| #define CACHE_WRITEBACK_SHIFT 6 |
| #define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT) |
| |
| #define BL32_BASE (0x0) |
| |
| /* |
| * Load address of BL3-3 for this platform port |
| */ |
| #define LK_SIZE_LIMIT (0x100000) |
| #define PLAT_MTK_NS_IMAGE_OFFSET (0x41E00000) |
| /* 16KB */ |
| #define ATF_AEE_BUFFER_SIZE (0x4000) |
| #define PAGE_SIZE_2MB_MASK (PAGE_SIZE_2MB - 1) |
| #define IS_PAGE_2MB_ALIGNED(addr) (((addr) & PAGE_SIZE_2MB_MASK) == 0) |
| #define PAGE_SIZE_2MB (1 << PAGE_SIZE_2MB_SHIFT) |
| #define PAGE_SIZE_2MB_SHIFT TWO_MB_SHIFT |
| |
| #endif /* __PLATFORM_DEF_H__ */ |