blob: c769b73bbac58576bf80d9d180a4351a761a2be3 [file] [log] [blame]
/*
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch_helpers.h>
#include <debug.h>
#include <delay_timer.h>
#include <mmio.h>
#include <platform_def.h>
#include <plat_private.h>
#include <dram.h>
#include <rk3399_def.h>
#include <rk3399m0.h>
#include <soc.h>
/* Table of regions to map using the MMU. */
const mmap_region_t plat_rk_mmap[] = {
MAP_REGION_FLAT(RK3399_DEV_RNG0_BASE, RK3399_DEV_RNG0_SIZE,
MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(PMUSRAM_BASE, PMUSRAM_SIZE,
MT_MEMORY | MT_RW | MT_SECURE),
{ 0 }
};
/* The RockChip power domain tree descriptor */
const unsigned char rockchip_power_domain_tree_desc[] = {
/* No of root nodes */
PLATFORM_SYSTEM_COUNT,
/* No of children for the root node */
PLATFORM_CLUSTER_COUNT,
/* No of children for the first cluster node */
PLATFORM_CLUSTER0_CORE_COUNT,
/* No of children for the second cluster node */
PLATFORM_CLUSTER1_CORE_COUNT
};
void secure_timer_init(void)
{
mmio_write_32(STIMER1_CHN_BASE(5) + TIMER_END_COUNT0, 0xffffffff);
mmio_write_32(STIMER1_CHN_BASE(5) + TIMER_END_COUNT1, 0xffffffff);
mmio_write_32(STIMER1_CHN_BASE(5) + TIMER_INIT_COUNT0, 0x0);
mmio_write_32(STIMER1_CHN_BASE(5) + TIMER_INIT_COUNT0, 0x0);
/* auto reload & enable the timer */
mmio_write_32(STIMER1_CHN_BASE(5) + TIMER_CONTROL_REG,
TIMER_EN | TIMER_FMODE);
}
void sgrf_init(void)
{
/* security config for master */
mmio_write_32(SGRF_BASE + SGRF_SOC_CON3_7(5),
SGRF_SOC_CON_WMSK | SGRF_SOC_ALLMST_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON3_7(6),
SGRF_SOC_CON_WMSK | SGRF_SOC_ALLMST_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON3_7(7),
SGRF_SOC_CON_WMSK | SGRF_SOC_ALLMST_NS);
/* security config for slave */
mmio_write_32(SGRF_BASE + SGRF_PMU_SLV_CON0_1(0),
SGRF_PMU_SLV_S_CFGED |
SGRF_PMU_SLV_CRYPTO1_NS);
mmio_write_32(SGRF_BASE + SGRF_PMU_SLV_CON0_1(1),
SGRF_PMU_SLV_CON1_CFG);
mmio_write_32(SGRF_BASE + SGRF_SLV_SECURE_CON0_4(0),
SGRF_SLV_S_WMSK | SGRF_SLV_S_ALL_NS);
mmio_write_32(SGRF_BASE + SGRF_SLV_SECURE_CON0_4(1),
SGRF_SLV_S_WMSK | SGRF_SLV_S_ALL_NS);
mmio_write_32(SGRF_BASE + SGRF_SLV_SECURE_CON0_4(2),
SGRF_SLV_S_WMSK | SGRF_SLV_S_ALL_NS);
mmio_write_32(SGRF_BASE + SGRF_SLV_SECURE_CON0_4(3),
SGRF_SLV_S_WMSK | SGRF_SLV_S_ALL_NS);
mmio_write_32(SGRF_BASE + SGRF_SLV_SECURE_CON0_4(4),
SGRF_SLV_S_WMSK | SGRF_SLV_S_ALL_NS);
/* security config for ddr memery */
mmio_write_32(SGRF_BASE + SGRF_DDRRGN_CON0_16(16),
SGRF_DDR_RGN_BYPS);
}
static void dma_secure_cfg(uint32_t secure)
{
if (secure) {
/* rgn0 secure for dmac0 and dmac1 */
mmio_write_32(SGRF_BASE + SGRF_DDRRGN_CON20_34(22),
SGRF_L_MST_S_DDR_RGN(0) | /* dmac0 */
SGRF_H_MST_S_DDR_RGN(0) /* dmac1 */
);
/* set dmac0 boot, under secure state */
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(8),
SGRF_DMAC_CFG_S);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(9),
SGRF_DMAC_CFG_S);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(10),
SGRF_DMAC_CFG_S);
/* dmac0 soft reset */
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC0_RST);
udelay(5);
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC0_RST_RLS);
/* set dmac1 boot, under secure state */
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(11),
SGRF_DMAC_CFG_S);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(12),
SGRF_DMAC_CFG_S);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(13),
SGRF_DMAC_CFG_S);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(14),
SGRF_DMAC_CFG_S);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(15),
SGRF_DMAC_CFG_S);
/* dmac1 soft reset */
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC1_RST);
udelay(5);
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC1_RST_RLS);
} else {
/* rgn non-secure for dmac0 and dmac1 */
mmio_write_32(SGRF_BASE + SGRF_DDRRGN_CON20_34(22),
DMAC1_RGN_NS | DMAC0_RGN_NS);
/* set dmac0 boot, under non-secure state */
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(8),
DMAC0_BOOT_CFG_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(9),
DMAC0_BOOT_PERIPH_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(10),
DMAC0_BOOT_ADDR_NS);
/* dmac0 soft reset */
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC0_RST);
udelay(5);
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC0_RST_RLS);
/* set dmac1 boot, under non-secure state */
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(11),
DMAC1_BOOT_CFG_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(12),
DMAC1_BOOT_PERIPH_L_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(13),
DMAC1_BOOT_ADDR_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(14),
DMAC1_BOOT_PERIPH_H_NS);
mmio_write_32(SGRF_BASE + SGRF_SOC_CON8_15(15),
DMAC1_BOOT_IRQ_NS);
/* dmac1 soft reset */
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC1_RST);
udelay(5);
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
CRU_DMAC1_RST_RLS);
}
}
/* pll suspend */
struct deepsleep_data_s slp_data;
void secure_watchdog_disable(void)
{
slp_data.sgrf_con[3] = mmio_read_32(SGRF_BASE + SGRF_SOC_CON3_7(3));
/* disable CA53 wdt pclk */
mmio_write_32(SGRF_BASE + SGRF_SOC_CON3_7(3),
BITS_WITH_WMASK(WDT_CA53_DIS, WDT_CA53_1BIT_MASK,
PCLK_WDT_CA53_GATE_SHIFT));
/* disable CM0 wdt pclk */
mmio_write_32(SGRF_BASE + SGRF_SOC_CON3_7(3),
BITS_WITH_WMASK(WDT_CM0_DIS, WDT_CM0_1BIT_MASK,
PCLK_WDT_CM0_GATE_SHIFT));
}
void secure_watchdog_restore(void)
{
mmio_write_32(SGRF_BASE + SGRF_SOC_CON3_7(3),
slp_data.sgrf_con[3] |
WMSK_BIT(PCLK_WDT_CA53_GATE_SHIFT) |
WMSK_BIT(PCLK_WDT_CM0_GATE_SHIFT));
}
static void set_pll_slow_mode(uint32_t pll_id)
{
if (pll_id == PPLL_ID)
mmio_write_32(PMUCRU_BASE + PMUCRU_PPLL_CON(3), PLL_SLOW_MODE);
else
mmio_write_32((CRU_BASE +
CRU_PLL_CON(pll_id, 3)), PLL_SLOW_MODE);
}
static void set_pll_normal_mode(uint32_t pll_id)
{
if (pll_id == PPLL_ID)
mmio_write_32(PMUCRU_BASE + PMUCRU_PPLL_CON(3), PLL_NOMAL_MODE);
else
mmio_write_32(CRU_BASE +
CRU_PLL_CON(pll_id, 3), PLL_NOMAL_MODE);
}
static void set_pll_bypass(uint32_t pll_id)
{
if (pll_id == PPLL_ID)
mmio_write_32(PMUCRU_BASE +
PMUCRU_PPLL_CON(3), PLL_BYPASS_MODE);
else
mmio_write_32(CRU_BASE +
CRU_PLL_CON(pll_id, 3), PLL_BYPASS_MODE);
}
static void _pll_suspend(uint32_t pll_id)
{
set_pll_slow_mode(pll_id);
set_pll_bypass(pll_id);
}
/**
* disable_dvfs_plls - To suspend the specific PLLs
*
* When we close the center logic, the DPLL will be closed,
* so we need to keep the ABPLL and switch to it to supply
* clock for DDR during suspend, then we should not close
* the ABPLL and exclude ABPLL_ID.
*/
void disable_dvfs_plls(void)
{
_pll_suspend(CPLL_ID);
_pll_suspend(NPLL_ID);
_pll_suspend(VPLL_ID);
_pll_suspend(GPLL_ID);
_pll_suspend(ALPLL_ID);
}
/**
* disable_nodvfs_plls - To suspend the PPLL
*/
void disable_nodvfs_plls(void)
{
_pll_suspend(PPLL_ID);
}
/**
* restore_pll - Copy PLL settings from memory to a PLL.
*
* This will copy PLL settings from an array in memory to the memory mapped
* registers for a PLL.
*
* Note that: above the PLL exclude PPLL.
*
* pll_id: One of the values from enum plls_id
* src: Pointer to the array of values to restore from
*/
static void restore_pll(int pll_id, uint32_t *src)
{
/* Nice to have PLL off while configuring */
mmio_write_32((CRU_BASE + CRU_PLL_CON(pll_id, 3)), PLL_SLOW_MODE);
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 0), src[0] | REG_SOC_WMSK);
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 1), src[1] | REG_SOC_WMSK);
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 2), src[2]);
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 4), src[4] | REG_SOC_WMSK);
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 5), src[5] | REG_SOC_WMSK);
/* Do PLL_CON3 since that will enable things */
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 3), src[3] | REG_SOC_WMSK);
/* Wait for PLL lock done */
while ((mmio_read_32(CRU_BASE + CRU_PLL_CON(pll_id, 2)) &
0x80000000) == 0x0)
;
}
/**
* save_pll - Copy PLL settings a PLL to memory
*
* This will copy PLL settings from the memory mapped registers for a PLL to
* an array in memory.
*
* Note that: above the PLL exclude PPLL.
*
* pll_id: One of the values from enum plls_id
* src: Pointer to the array of values to save to.
*/
static void save_pll(uint32_t *dst, int pll_id)
{
int i;
for (i = 0; i < PLL_CON_COUNT; i++)
dst[i] = mmio_read_32(CRU_BASE + CRU_PLL_CON(pll_id, i));
}
/**
* prepare_abpll_for_ddrctrl - Copy DPLL settings to ABPLL
*
* This will copy DPLL settings from the memory mapped registers for a PLL to
* an array in memory.
*/
void prepare_abpll_for_ddrctrl(void)
{
save_pll(slp_data.plls_con[ABPLL_ID], ABPLL_ID);
save_pll(slp_data.plls_con[DPLL_ID], DPLL_ID);
restore_pll(ABPLL_ID, slp_data.plls_con[DPLL_ID]);
}
void restore_abpll(void)
{
restore_pll(ABPLL_ID, slp_data.plls_con[ABPLL_ID]);
}
void restore_dpll(void)
{
restore_pll(DPLL_ID, slp_data.plls_con[DPLL_ID]);
}
void clk_gate_con_save(void)
{
uint32_t i = 0;
for (i = 0; i < PMUCRU_GATE_COUNT; i++)
slp_data.pmucru_gate_con[i] =
mmio_read_32(PMUCRU_BASE + PMUCRU_GATE_CON(i));
for (i = 0; i < CRU_GATE_COUNT; i++)
slp_data.cru_gate_con[i] =
mmio_read_32(CRU_BASE + CRU_GATE_CON(i));
}
void clk_gate_con_disable(void)
{
uint32_t i;
for (i = 0; i < PMUCRU_GATE_COUNT; i++)
mmio_write_32(PMUCRU_BASE + PMUCRU_GATE_CON(i), REG_SOC_WMSK);
for (i = 0; i < CRU_GATE_COUNT; i++)
mmio_write_32(CRU_BASE + CRU_GATE_CON(i), REG_SOC_WMSK);
}
void clk_gate_con_restore(void)
{
uint32_t i;
for (i = 0; i < PMUCRU_GATE_COUNT; i++)
mmio_write_32(PMUCRU_BASE + PMUCRU_GATE_CON(i),
REG_SOC_WMSK | slp_data.pmucru_gate_con[i]);
for (i = 0; i < CRU_GATE_COUNT; i++)
mmio_write_32(CRU_BASE + CRU_GATE_CON(i),
REG_SOC_WMSK | slp_data.cru_gate_con[i]);
}
static void set_plls_nobypass(uint32_t pll_id)
{
if (pll_id == PPLL_ID)
mmio_write_32(PMUCRU_BASE + PMUCRU_PPLL_CON(3),
PLL_NO_BYPASS_MODE);
else
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 3),
PLL_NO_BYPASS_MODE);
}
static void _pll_resume(uint32_t pll_id)
{
set_plls_nobypass(pll_id);
set_pll_normal_mode(pll_id);
}
/**
* enable_dvfs_plls - To resume the specific PLLs
*
* Please see the comment at the disable_dvfs_plls()
* we don't suspend the ABPLL, so don't need resume
* it too.
*/
void enable_dvfs_plls(void)
{
_pll_resume(ALPLL_ID);
_pll_resume(GPLL_ID);
_pll_resume(VPLL_ID);
_pll_resume(NPLL_ID);
_pll_resume(CPLL_ID);
}
/**
* enable_nodvfs_plls - To resume the PPLL
*/
void enable_nodvfs_plls(void)
{
_pll_resume(PPLL_ID);
}
void soc_global_soft_reset_init(void)
{
mmio_write_32(PMUCRU_BASE + CRU_PMU_RSTHOLD_CON(1),
CRU_PMU_SGRF_RST_RLS);
mmio_clrbits_32(CRU_BASE + CRU_GLB_RST_CON,
CRU_PMU_WDTRST_MSK | CRU_PMU_FIRST_SFTRST_MSK);
}
void __dead2 soc_global_soft_reset(void)
{
set_pll_slow_mode(VPLL_ID);
set_pll_slow_mode(NPLL_ID);
set_pll_slow_mode(GPLL_ID);
set_pll_slow_mode(CPLL_ID);
set_pll_slow_mode(PPLL_ID);
set_pll_slow_mode(ABPLL_ID);
set_pll_slow_mode(ALPLL_ID);
dsb();
mmio_write_32(CRU_BASE + CRU_GLB_SRST_FST, GLB_SRST_FST_CFG_VAL);
/*
* Maybe the HW needs some times to reset the system,
* so we do not hope the core to excute valid codes.
*/
while (1)
;
}
static void soc_m0_init(void)
{
/* secure config for pmu M0 */
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(0), WMSK_BIT(7));
/* set the execute address for M0 */
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(3),
BITS_WITH_WMASK((M0_BINCODE_BASE >> 12) & 0xffff,
0xffff, 0));
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(7),
BITS_WITH_WMASK((M0_BINCODE_BASE >> 28) & 0xf,
0xf, 0));
}
void plat_rockchip_soc_init(void)
{
secure_timer_init();
dma_secure_cfg(0);
sgrf_init();
soc_global_soft_reset_init();
plat_rockchip_gpio_init();
soc_m0_init();
dram_init();
}