blob: 383409df0c481a2678223f11ed994989777f3b34 [file] [log] [blame]
/*
* Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <errno.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/tbbr/tbbr_img_def.h>
#include <drivers/arm/sp805.h>
#include <plat/common/platform.h>
#include <platform_def.h>
#include <plat_arm.h>
#include <sds.h>
void juno_reset_to_aarch32_state(void);
static int is_watchdog_reset(void)
{
#if !CSS_USE_SCMI_SDS_DRIVER
#define RESET_REASON_WDOG_RESET (0x2)
const uint32_t *reset_flags_ptr = (const uint32_t *)SSC_GPRETN;
if ((*reset_flags_ptr & RESET_REASON_WDOG_RESET) != 0)
return 1;
return 0;
#else
int ret;
uint32_t scp_reset_synd_flags;
ret = sds_init();
if (ret != SDS_OK) {
ERROR("SCP SDS initialization failed\n");
panic();
}
ret = sds_struct_read(SDS_RESET_SYNDROME_STRUCT_ID,
SDS_RESET_SYNDROME_OFFSET,
&scp_reset_synd_flags,
SDS_RESET_SYNDROME_SIZE,
SDS_ACCESS_MODE_NON_CACHED);
if (ret != SDS_OK) {
ERROR("Getting reset reason from SDS failed\n");
panic();
}
/* Check if the WATCHDOG_RESET_BIT is set in the reset syndrome */
if (scp_reset_synd_flags & SDS_RESET_SYNDROME_AP_WD_RESET_BIT)
return 1;
return 0;
#endif
}
/*******************************************************************************
* The following function checks if Firmware update is needed,
* by checking if TOC in FIP image is valid or watchdog reset happened.
******************************************************************************/
int plat_arm_bl1_fwu_needed(void)
{
const uint32_t *nv_flags_ptr = (const uint32_t *)V2M_SYS_NVFLAGS_ADDR;
/* Check if TOC is invalid or watchdog reset happened. */
if ((arm_io_is_toc_valid() != 1) ||
(((*nv_flags_ptr == -EAUTH) || (*nv_flags_ptr == -ENOENT))
&& is_watchdog_reset()))
return 1;
return 0;
}
/*******************************************************************************
* On JUNO update the arg2 with address of SCP_BL2U image info.
******************************************************************************/
void bl1_plat_set_ep_info(unsigned int image_id,
entry_point_info_t *ep_info)
{
if (image_id == BL2U_IMAGE_ID) {
image_desc_t *image_desc = bl1_plat_get_image_desc(SCP_BL2U_IMAGE_ID);
ep_info->args.arg2 = (unsigned long)&image_desc->image_info;
}
}
/*******************************************************************************
* On Juno clear SYS_NVFLAGS and wait for watchdog reset.
******************************************************************************/
__dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved)
{
unsigned int *nv_flags_clr = (unsigned int *)
(V2M_SYSREGS_BASE + V2M_SYS_NVFLAGSCLR);
unsigned int *nv_flags_ptr = (unsigned int *)
(V2M_SYSREGS_BASE + V2M_SYS_NVFLAGS);
/* Clear the NV flags register. */
*nv_flags_clr = *nv_flags_ptr;
while (1)
wfi();
}
#if JUNO_AARCH32_EL3_RUNTIME
void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
{
#if !ARM_DISABLE_TRUSTED_WDOG
/* Disable watchdog before leaving BL1 */
sp805_stop(ARM_SP805_TWDG_BASE);
#endif
juno_reset_to_aarch32_state();
}
#endif /* JUNO_AARCH32_EL3_RUNTIME */