| /* |
| * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * Neither the name of ARM nor the names of its contributors may be used |
| * to endorse or promote products derived from this software without specific |
| * prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __UART_16550_H__ |
| #define __UART_16550_H__ |
| |
| /* UART16550 Registers */ |
| #define UARTTX 0x0 |
| #define UARTRX 0x0 |
| #define UARTDLL 0x0 |
| #define UARTIER 0x4 |
| #define UARTDLLM 0x4 |
| #define UARTIIR 0x8 |
| #define UARTFCR 0x8 |
| #define UARTLCR 0xc |
| #define UARTMCR 0x10 |
| #define UARTLSR 0x14 |
| #define UARTMSR 0x18 |
| #define UARTSPR 0x1c |
| #define UARTCSR 0x20 |
| #define UARTRXFIFOCFG 0x24 |
| #define UARTMIE 0x28 |
| #define UARTVNDR 0x2c |
| #define UARTASR 0x3c |
| |
| /* FIFO Control Register bits */ |
| #define UARTFCR_FIFOMD_16450 (0 << 6) |
| #define UARTFCR_FIFOMD_16550 (1 << 6) |
| #define UARTFCR_RXTRIG_1 (0 << 6) |
| #define UARTFCR_RXTRIG_4 (1 << 6) |
| #define UARTFCR_RXTRIG_8 (2 << 6) |
| #define UARTFCR_RXTRIG_16 (3 << 6) |
| #define UARTFCR_TXTRIG_1 (0 << 4) |
| #define UARTFCR_TXTRIG_4 (1 << 4) |
| #define UARTFCR_TXTRIG_8 (2 << 4) |
| #define UARTFCR_TXTRIG_16 (3 << 4) |
| #define UARTFCR_DMAEN (1 << 3) /* Enable DMA mode */ |
| #define UARTFCR_TXCLR (1 << 2) /* Clear contents of Tx FIFO */ |
| #define UARTFCR_RXCLR (1 << 1) /* Clear contents of Rx FIFO */ |
| #define UARTFCR_FIFOEN (1 << 0) /* Enable the Tx/Rx FIFO */ |
| |
| /* Line Control Register bits */ |
| #define UARTLCR_DLAB (1 << 7) /* Divisor Latch Access */ |
| #define UARTLCR_SETB (1 << 6) /* Set BREAK Condition */ |
| #define UARTLCR_SETP (1 << 5) /* Set Parity to LCR[4] */ |
| #define UARTLCR_EVEN (1 << 4) /* Even Parity Format */ |
| #define UARTLCR_PAR (1 << 3) /* Parity */ |
| #define UARTLCR_STOP (1 << 2) /* Stop Bit */ |
| #define UARTLCR_WORDSZ_5 0 /* Word Length of 5 */ |
| #define UARTLCR_WORDSZ_6 1 /* Word Length of 6 */ |
| #define UARTLCR_WORDSZ_7 2 /* Word Length of 7 */ |
| #define UARTLCR_WORDSZ_8 3 /* Word Length of 8 */ |
| |
| /* Line Status Register bits */ |
| #define UARTLSR_RXFIFOEMT (1 << 9) /* Rx Fifo Empty */ |
| #define UARTLSR_TXFIFOFULL (1 << 8) /* Tx Fifo Full */ |
| #define UARTLSR_RXFIFOERR (1 << 7) /* Rx Fifo Error */ |
| #define UARTLSR_TEMT (1 << 6) /* Tx Shift Register Empty */ |
| #define UARTLSR_THRE (1 << 5) /* Tx Holding Register Empty */ |
| #define UARTLSR_BRK (1 << 4) /* Break Condition Detected */ |
| #define UARTLSR_FERR (1 << 3) /* Framing Error */ |
| #define UARTLSR_PERR (1 << 3) /* Parity Error */ |
| #define UARTLSR_OVRF (1 << 2) /* Rx Overrun Error */ |
| #define UARTLSR_RDR_BIT (0) /* Rx Data Ready Bit */ |
| #define UARTLSR_RDR (1 << UARTLSR_RDR_BIT) /* Rx Data Ready */ |
| |
| #endif /* __UART_16550_H__ */ |