blob: 03ec690ffa7fb3912e8701c1f2a109129fa0ec1f [file] [log] [blame]
/*
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arm_gic.h>
#include <assert.h>
#include <bl_common.h>
#include <console.h>
#include <debug.h>
#include <mcucfg.h>
#include <mmio.h>
#include <mtcmos.h>
#include <plat_private.h>
#include <platform.h>
#include <spm.h>
/*******************************************************************************
* Declarations of linker defined symbols which will help us find the layout
* of trusted SRAM
******************************************************************************/
unsigned long __RO_START__;
unsigned long __RO_END__;
unsigned long __COHERENT_RAM_START__;
unsigned long __COHERENT_RAM_END__;
/*
* The next 2 constants identify the extents of the code & RO data region.
* These addresses are used by the MMU setup code and therefore they must be
* page-aligned. It is the responsibility of the linker script to ensure that
* __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
*/
#define BL31_RO_BASE (unsigned long)(&__RO_START__)
#define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
/*
* The next 2 constants identify the extents of the coherent memory region.
* These addresses are used by the MMU setup code and therefore they must be
* page-aligned. It is the responsibility of the linker script to ensure that
* __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
* refer to page-aligned addresses.
*/
#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
static entry_point_info_t bl32_ep_info;
static entry_point_info_t bl33_ep_info;
static void platform_setup_cpu(void)
{
/* turn off all the little core's power except cpu 0 */
mtcmos_little_cpu_off();
/* setup big cores */
mmio_write_32((uintptr_t)&mt8173_mcucfg->mp1_config_res,
MP1_DIS_RGU0_WAIT_PD_CPUS_L1_ACK |
MP1_DIS_RGU1_WAIT_PD_CPUS_L1_ACK |
MP1_DIS_RGU2_WAIT_PD_CPUS_L1_ACK |
MP1_DIS_RGU3_WAIT_PD_CPUS_L1_ACK |
MP1_DIS_RGU_NOCPU_WAIT_PD_CPUS_L1_ACK);
mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp1_miscdbg, MP1_AINACTS);
mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp1_clkenm_div,
MP1_SW_CG_GEN);
mmio_clrbits_32((uintptr_t)&mt8173_mcucfg->mp1_rst_ctl,
MP1_L2RSTDISABLE);
/* set big cores arm64 boot mode */
mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp1_cpucfg,
MP1_CPUCFG_64BIT);
/* set LITTLE cores arm64 boot mode */
mmio_setbits_32((uintptr_t)&mt8173_mcucfg->mp0_rv_addr[0].rv_addr_hw,
MP0_CPUCFG_64BIT);
}
/*******************************************************************************
* Return a pointer to the 'entry_point_info' structure of the next image for
* the security state specified. BL33 corresponds to the non-secure image type
* while BL32 corresponds to the secure image type. A NULL pointer is returned
* if the image does not exist.
******************************************************************************/
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
entry_point_info_t *next_image_info;
next_image_info = (type == NON_SECURE) ? &bl33_ep_info : &bl32_ep_info;
/* None of the images on this platform can have 0x0 as the entrypoint */
if (next_image_info->pc)
return next_image_info;
else
return NULL;
}
/*******************************************************************************
* Perform any BL3-1 early platform setup. Here is an opportunity to copy
* parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they
* are lost (potentially). This needs to be done before the MMU is initialized
* so that the memory layout can be used while creating page tables.
* BL2 has flushed this information to memory, so we are guaranteed to pick up
* good data.
******************************************************************************/
void bl31_early_platform_setup(bl31_params_t *from_bl2,
void *plat_params_from_bl2)
{
console_init(MT8173_UART0_BASE, MT8173_UART_CLOCK, MT8173_BAUDRATE);
VERBOSE("bl31_setup\n");
assert(from_bl2 != NULL);
assert(from_bl2->h.type == PARAM_BL31);
assert(from_bl2->h.version >= VERSION_1);
assert(((unsigned long)plat_params_from_bl2) == MT_BL31_PLAT_PARAM_VAL);
bl32_ep_info = *from_bl2->bl32_ep_info;
bl33_ep_info = *from_bl2->bl33_ep_info;
}
/*******************************************************************************
* Perform any BL3-1 platform setup code
******************************************************************************/
void bl31_platform_setup(void)
{
platform_setup_cpu();
plat_delay_timer_init();
/* Initialize the gic cpu and distributor interfaces */
plat_mt_gic_init();
arm_gic_setup();
/* Topologies are best known to the platform. */
mt_setup_topology();
/* Initialize spm at boot time */
spm_boot_init();
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this is only intializes the mmu in a quick and dirty way.
******************************************************************************/
void bl31_plat_arch_setup(void)
{
plat_cci_init();
plat_cci_enable();
plat_configure_mmu_el3(BL31_RO_BASE,
(BL31_COHERENT_RAM_LIMIT - BL31_RO_BASE),
BL31_RO_BASE,
BL31_RO_LIMIT,
BL31_COHERENT_RAM_BASE,
BL31_COHERENT_RAM_LIMIT);
}