blob: 9ab6e648865345cfa41248a501b42caab1ef0bf5 [file] [log] [blame]
#
# Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# Neither the name of ARM nor the names of its contributors may be used
# to endorse or promote products derived from this software without specific
# prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Convenience function for adding build definitions
# $(eval $(call add_define,FOO)) will have:
# -DFOO if $(FOO) is empty; -DFOO=$(FOO) otherwise
define add_define
DEFINES += -D$(1)$(if $(value $(1)),=$(value $(1)),)
endef
# Convenience function for verifying option has a boolean value
# $(eval $(call assert_boolean,FOO)) will assert FOO is 0 or 1
define assert_boolean
$(and $(patsubst 0,,$(value $(1))),$(patsubst 1,,$(value $(1))),$(error $(1) must be boolean))
endef
# IMG_LINKERFILE defines the linker script corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_LINKERFILE
${BUILD_DIR}/bl$(1).ld
endef
# IMG_MAPFILE defines the output file describing the memory map corresponding
# to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_MAPFILE
${BUILD_DIR}/bl$(1).map
endef
# IMG_ELF defines the elf file corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_ELF
${BUILD_DIR}/bl$(1).elf
endef
# IMG_DUMP defines the symbols dump file corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_DUMP
${BUILD_DIR}/bl$(1).dump
endef
# IMG_BIN defines the default image file corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_BIN
${BUILD_PLAT}/bl$(1).bin
endef
# FIP_ADD_PAYLOAD appends the command line arguments required by the FIP tool
# to package a new payload. Optionally, it adds the dependency on this payload
# $(1) = payload filename (i.e. bl31.bin)
# $(2) = command line option for the specified payload (i.e. --bl31)
# $(3) = fip target dependency (optional) (i.e. bl31)
define FIP_ADD_PAYLOAD
$(eval FIP_ARGS += $(2) $(1))
$(eval $(if $(3),FIP_DEPS += $(3)))
endef
# CERT_ADD_CMD_OPT adds a new command line option to the cert_create invokation
# $(1) = parameter filename
# $(2) = cert_create command line option for the specified parameter
# $(3) = input parameter (false if empty)
define CERT_ADD_CMD_OPT
$(eval $(if $(3),CRT_DEPS += $(1)))
$(eval CRT_ARGS += $(2) $(1))
endef
# FIP_ADD_IMG allows the platform to specify an image to be packed in the FIP
# using a build option. It also adds a dependency on the image file, aborting
# the build if the file does not exist.
# $(1) = build option to specify the image filename (BL30, BL33, etc)
# $(2) = command line option for the fip_create tool (bl30, bl33, etc)
# Example:
# $(eval $(call FIP_ADD_IMG,BL33,--bl33))
define FIP_ADD_IMG
CRT_DEPS += check_$(1)
FIP_DEPS += check_$(1)
$(call FIP_ADD_PAYLOAD,$(value $(1)),$(2))
check_$(1):
$$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
endef
################################################################################
# Auxiliary macros to build TF images from sources
################################################################################
# If no goal is specified in the command line, .DEFAULT_GOAL is used.
# .DEFAULT_GOAL is defined in the main Makefile before including this file.
ifeq ($(MAKECMDGOALS),)
MAKECMDGOALS := $(.DEFAULT_GOAL)
endif
define match_goals
$(strip $(foreach goal,$(1),$(filter $(goal),$(MAKECMDGOALS))))
endef
# List of rules that involve building things
BUILD_TARGETS := all bl1 bl2 bl31 bl32 certificates fip
# Does the list of goals specified on the command line include a build target?
ifneq ($(call match_goals,${BUILD_TARGETS}),)
IS_ANYTHING_TO_BUILD := 1
endif
# MAKE_C builds a C source file and generates the dependency file
# $(1) = output directory
# $(2) = source file (%.c)
# $(3) = BL stage (2, 30, 31, 32, 33)
define MAKE_C
$(eval OBJ := $(1)/$(patsubst %.c,%.o,$(notdir $(2))))
$(eval PREREQUISITES := $(patsubst %.o,%.d,$(OBJ)))
$(OBJ): $(2)
@echo " CC $$<"
$$(Q)$$(CC) $$(CFLAGS) -DIMAGE_BL$(3) -c $$< -o $$@
$(PREREQUISITES): $(2)
@echo " DEPS $$@"
@mkdir -p $(1)
$$(Q)$$(CC) $$(CFLAGS) -M -MT $(OBJ) -MF $$@ $$<
ifdef IS_ANYTHING_TO_BUILD
-include $(PREREQUISITES)
endif
endef
# MAKE_S builds an assembly source file and generates the dependency file
# $(1) = output directory
# $(2) = assembly file (%.S)
# $(3) = BL stage (2, 30, 31, 32, 33)
define MAKE_S
$(eval OBJ := $(1)/$(patsubst %.S,%.o,$(notdir $(2))))
$(eval PREREQUISITES := $(patsubst %.o,%.d,$(OBJ)))
$(OBJ): $(2)
@echo " AS $$<"
$$(Q)$$(AS) $$(ASFLAGS) -DIMAGE_BL$(3) -c $$< -o $$@
$(PREREQUISITES): $(2)
@echo " DEPS $$@"
@mkdir -p $(1)
$$(Q)$$(AS) $$(ASFLAGS) -M -MT $(OBJ) -MF $$@ $$<
ifdef IS_ANYTHING_TO_BUILD
-include $(PREREQUISITES)
endif
endef
# MAKE_LD generate the linker script using the C preprocessor
# $(1) = output linker script
# $(2) = input template
define MAKE_LD
$(eval PREREQUISITES := $(1).d)
$(1): $(2)
@echo " PP $$<"
$$(Q)$$(AS) $$(ASFLAGS) -P -E -D__LINKER__ -o $$@ $$<
$(PREREQUISITES): $(2)
@echo " DEPS $$@"
@mkdir -p $$(dir $$@)
$$(Q)$$(AS) $$(ASFLAGS) -M -MT $(1) -MF $$@ $$<
ifdef IS_ANYTHING_TO_BUILD
-include $(PREREQUISITES)
endif
endef
# MAKE_OBJS builds both C and assembly source files
# $(1) = output directory
# $(2) = list of source files (both C and assembly)
# $(3) = BL stage (2, 30, 31, 32, 33)
define MAKE_OBJS
$(eval C_OBJS := $(filter %.c,$(2)))
$(eval REMAIN := $(filter-out %.c,$(2)))
$(eval $(foreach obj,$(C_OBJS),$(call MAKE_C,$(1),$(obj),$(3))))
$(eval S_OBJS := $(filter %.S,$(REMAIN)))
$(eval REMAIN := $(filter-out %.S,$(REMAIN)))
$(eval $(foreach obj,$(S_OBJS),$(call MAKE_S,$(1),$(obj),$(3))))
$(and $(REMAIN),$(error Unexpected source files present: $(REMAIN)))
endef
# NOTE: The line continuation '\' is required in the next define otherwise we
# end up with a line-feed characer at the end of the last c filename.
# Also bare this issue in mind if extending the list of supported filetypes.
define SOURCES_TO_OBJS
$(notdir $(patsubst %.c,%.o,$(filter %.c,$(1)))) \
$(notdir $(patsubst %.S,%.o,$(filter %.S,$(1))))
endef
# MAKE_TOOL_ARGS macro defines the command line arguments for the FIP tool for
# each BL image. Arguments:
# $(1) = BL stage (2, 30, 31, 32, 33)
# $(2) = Binary file
# $(3) = In FIP (false if empty)
define MAKE_TOOL_ARGS
$(if $(3),$(eval $(call FIP_ADD_PAYLOAD,$(2),--bl$(1),bl$(1))))
endef
# MAKE_BL macro defines the targets and options to build each BL image.
# Arguments:
# $(1) = BL stage (2, 30, 31, 32, 33)
# $(2) = In FIP (false if empty)
define MAKE_BL
$(eval BUILD_DIR := ${BUILD_PLAT}/bl$(1))
$(eval SOURCES := $(BL$(1)_SOURCES) $(BL_COMMON_SOURCES) $(PLAT_BL_COMMON_SOURCES))
$(eval OBJS := $(addprefix $(BUILD_DIR)/,$(call SOURCES_TO_OBJS,$(SOURCES))))
$(eval LINKERFILE := $(call IMG_LINKERFILE,$(1)))
$(eval MAPFILE := $(call IMG_MAPFILE,$(1)))
$(eval ELF := $(call IMG_ELF,$(1)))
$(eval DUMP := $(call IMG_DUMP,$(1)))
$(eval BIN := $(call IMG_BIN,$(1)))
$(eval $(call MAKE_OBJS,$(BUILD_DIR),$(SOURCES),$(1)))
$(eval $(call MAKE_LD,$(LINKERFILE),$(BL$(1)_LINKERFILE)))
$(BUILD_DIR):
$$(Q)mkdir -p "$$@"
$(ELF): $(OBJS) $(LINKERFILE)
@echo " LD $$@"
@echo 'const char build_message[] = "Built : "__TIME__", "__DATE__; \
const char version_string[] = "${VERSION_STRING}";' | \
$$(CC) $$(CFLAGS) -xc - -o $(BUILD_DIR)/build_message.o
$$(Q)$$(LD) -o $$@ $$(LDFLAGS) -Map=$(MAPFILE) --script $(LINKERFILE) \
$(BUILD_DIR)/build_message.o $(OBJS)
$(DUMP): $(ELF)
@echo " OD $$@"
$${Q}$${OD} -dx $$< > $$@
$(BIN): $(ELF)
@echo " BIN $$@"
$$(Q)$$(OC) -O binary $$< $$@
@echo
@echo "Built $$@ successfully"
@echo
.PHONY: bl$(1)
bl$(1): $(BUILD_DIR) $(BIN) $(DUMP)
all: bl$(1)
$(eval $(call MAKE_TOOL_ARGS,$(1),$(BIN),$(2)))
endef