blob: fffa2ca94f8c03933bd47f3f850b7230109c91fc [file] [log] [blame]
/*
* Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __CCN_PRIVATE_H__
#define __CCN_PRIVATE_H__
/*
* A CCN implementation can have a maximum of 64 Request nodes with node IDs
* from 0-63. These IDs are split across the three types of Request nodes
* i.e. RN-F, RN-D and RN-I.
*/
#define MAX_RN_NODES 64
/* Enum used to loop through the 3 types of Request nodes */
typedef enum rn_types {
RN_TYPE_RNF = 0,
RN_TYPE_RNI,
RN_TYPE_RND,
NUM_RN_TYPES
} rn_types_t;
/* Macro to convert a region id to its base address */
#define region_id_to_base(id) ((id) << 16)
/*
* Macro to calculate the number of master interfaces resident on a RN-I/RN-D.
* Value of first two bits of the RN-I/D node type + 1 == Maximum number of
* ACE-Lite or ACE-Lite+DVM interfaces supported on this node. E.g.
*
* 0x14 : RN-I with 1 ACE-Lite interface
* 0x15 : RN-I with 2 ACE-Lite interfaces
* 0x16 : RN-I with 3 ACE-Lite interfaces
*/
#define rn_type_id_to_master_cnt(id) (((id) & 0x3) + 1)
/*
* Constants used to identify a region in the programmer's view. These are
* common for all regions.
*/
#define REGION_ID_LIMIT 256
#define REGION_ID_OFFSET 0xFF00
#define REGION_NODE_ID_SHIFT 8
#define REGION_NODE_ID_MASK 0x7f
#define get_node_id(id_reg) (((id_reg) >> REGION_NODE_ID_SHIFT) \
& REGION_NODE_ID_MASK)
#define REGION_NODE_TYPE_SHIFT 0
#define REGION_NODE_TYPE_MASK 0x1f
#define get_node_type(id_reg) (((id_reg) >> REGION_NODE_TYPE_SHIFT) \
& REGION_NODE_TYPE_MASK)
/* Common offsets of registers to enter or exit a snoop/dvm domain */
#define DOMAIN_CTRL_STAT_OFFSET 0x0200
#define DOMAIN_CTRL_SET_OFFSET 0x0210
#define DOMAIN_CTRL_CLR_OFFSET 0x0220
/*
* Thess macros are used to determine if an operation to add or remove a Request
* node from the snoop/dvm domain has completed. 'rn_id_map' is a bit map of
* nodes. It was used to program the SET or CLEAR control register. The type of
* register is specified by 'op_reg_offset'. 'status_reg' is the bit map of
* nodes currently present in the snoop/dvm domain. 'rn_id_map' and 'status_reg'
* are logically ANDed and the result it stored back in the 'status_reg'. There
* are two outcomes of this operation:
*
* 1. If the DOMAIN_CTRL_SET_OFFSET register was programmed, then the set bits in
* 'rn_id_map' should appear in 'status_reg' when the operation completes. So
* after the AND operation, at some point of time 'status_reg' should equal
* 'rn_id_map'.
*
* 2. If the DOMAIN_CTRL_CLR_OFFSET register was programmed, then the set bits in
* 'rn_id_map' should disappear in 'status_reg' when the operation
* completes. So after the AND operation, at some point of time 'status_reg'
* should equal 0.
*/
#define WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(region_id, stat_reg_offset, \
op_reg_offset, rn_id_map) \
{ \
uint64_t status_reg; \
do { \
status_reg = ccn_reg_read((ccn_plat_desc->periphbase), \
(region_id), \
(stat_reg_offset)); \
status_reg &= (rn_id_map); \
} while ((op_reg_offset) == DOMAIN_CTRL_SET_OFFSET ? \
(rn_id_map) != status_reg : status_reg); \
}
/*
* Region ID of the Miscellaneous Node is always 0 as its located at the base of
* the programmer's view.
*/
#define MN_REGION_ID 0
#define MN_REGION_ID_START 0
#define DEBUG_REGION_ID_START 1
#define HNI_REGION_ID_START 8
#define SBSX_REGION_ID_START 16
#define HNF_REGION_ID_START 32
#define XP_REGION_ID_START 64
#define RNI_REGION_ID_START 128
/* Selected register offsets from the base of a HNF region */
#define HNF_CFG_CTRL_OFFSET 0x0000
#define HNF_SAM_CTRL_OFFSET 0x0008
#define HNF_PSTATE_REQ_OFFSET 0x0010
#define HNF_PSTATE_STAT_OFFSET 0x0018
#define HNF_SDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET
#define HNF_SDC_SET_OFFSET DOMAIN_CTRL_SET_OFFSET
#define HNF_SDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET
#define HNF_AUX_CTRL_OFFSET 0x0500
/* Selected register offsets from the base of a MN region */
#define MN_SAR_OFFSET 0x0000
#define MN_RNF_NODEID_OFFSET 0x0180
#define MN_RNI_NODEID_OFFSET 0x0190
#define MN_RND_NODEID_OFFSET 0x01A0
#define MN_HNF_NODEID_OFFSET 0x01B0
#define MN_HNI_NODEID_OFFSET 0x01C0
#define MN_SN_NODEID_OFFSET 0x01D0
#define MN_DDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET
#define MN_DDC_SET_OFFSET DOMAIN_CTRL_SET_OFFSET
#define MN_DDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET
#define MN_PERIPH_ID_0_1_OFFSET 0xFE0
#define MN_ID_OFFSET REGION_ID_OFFSET
/* HNF System Address Map register bit masks and shifts */
#define HNF_SAM_CTRL_SN_ID_MASK 0x7f
#define HNF_SAM_CTRL_SN0_ID_SHIFT 0
#define HNF_SAM_CTRL_SN1_ID_SHIFT 8
#define HNF_SAM_CTRL_SN2_ID_SHIFT 16
#define HNF_SAM_CTRL_TAB0_MASK 0x3fUL
#define HNF_SAM_CTRL_TAB0_SHIFT 48
#define HNF_SAM_CTRL_TAB1_MASK 0x3fUL
#define HNF_SAM_CTRL_TAB1_SHIFT 56
#define HNF_SAM_CTRL_3SN_ENB_SHIFT 32
#define HNF_SAM_CTRL_3SN_ENB_MASK 0x01UL
/*
* Macro to create a value suitable for programming into a HNF SAM Control
* register for enabling 3SN striping.
*/
#define MAKE_HNF_SAM_CTRL_VALUE(sn0, sn1, sn2, tab0, tab1, three_sn_en) \
((((sn0) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN0_ID_SHIFT) | \
(((sn1) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN1_ID_SHIFT) | \
(((sn2) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN2_ID_SHIFT) | \
(((tab0) & HNF_SAM_CTRL_TAB0_MASK) << HNF_SAM_CTRL_TAB0_SHIFT) | \
(((tab1) & HNF_SAM_CTRL_TAB1_MASK) << HNF_SAM_CTRL_TAB1_SHIFT) | \
(((three_sn_en) & HNF_SAM_CTRL_3SN_ENB_MASK) << HNF_SAM_CTRL_3SN_ENB_SHIFT))
/* Mask to read the power state value from an HN-F P-state register */
#define HNF_PSTATE_MASK 0xf
/* Macro to extract the run mode from a p-state value */
#define PSTATE_TO_RUN_MODE(pstate) (((pstate) & HNF_PSTATE_MASK) >> 2)
/*
* Helper macro that iterates through a given bit map. In each iteration,
* it returns the position of the set bit.
* It can be used by other utility macros to iterates through all nodes
* or masters given a bit map of them.
*/
#define FOR_EACH_BIT(bit_pos, bit_map) \
for (bit_pos = __builtin_ctzll(bit_map); \
bit_map; \
bit_map &= ~(1UL << bit_pos), \
bit_pos = __builtin_ctzll(bit_map))
/*
* Utility macro that iterates through a bit map of node IDs. In each
* iteration, it returns the ID of the next present node in the bit map. Node
* ID of a present node == Position of set bit == Number of zeroes trailing the
* bit.
*/
#define FOR_EACH_PRESENT_NODE_ID(node_id, bit_map) \
FOR_EACH_BIT(node_id, bit_map)
/*
* Helper function to return number of set bits in bitmap
*/
static inline unsigned int count_set_bits(uint64_t bitmap)
{
unsigned int count = 0;
for (; bitmap; bitmap &= bitmap - 1)
++count;
return count;
}
/*
* Utility macro that iterates through a bit map of node IDs. In each iteration,
* it returns the ID of the next present region corresponding to a node present
* in the bit map. Region ID of a present node is in between passed region id
* and region id + number of set bits in the bitmap i.e. the number of present
* nodes.
*/
#define FOR_EACH_PRESENT_REGION_ID(region_id, bit_map) \
for (unsigned long long region_id_limit = count_set_bits(bit_map) \
+ region_id; \
region_id < region_id_limit; \
region_id++)
/*
* Same macro as FOR_EACH_PRESENT_NODE, but renamed to indicate it traverses
* through a bit map of master interfaces.
*/
#define FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, bit_map) \
FOR_EACH_BIT(iface_id, bit_map)
/*
* Macro that returns the node id bit map for the Miscellaneous Node
*/
#define CCN_GET_MN_NODEID_MAP(periphbase) \
(1 << get_node_id(ccn_reg_read(periphbase, MN_REGION_ID, \
REGION_ID_OFFSET)))
/*
* This macro returns the bitmap of Home nodes on the basis of the
* 'mn_hn_id_reg_offset' parameter from the Miscellaneous node's (MN)
* programmer's view. The MN has a register which carries the bitmap of present
* Home nodes of each type i.e. HN-Fs, HN-Is & HN-Ds.
*/
#define CCN_GET_HN_NODEID_MAP(periphbase, mn_hn_id_reg_offset) \
ccn_reg_read(periphbase, MN_REGION_ID, mn_hn_id_reg_offset)
#endif /* __CCN_PRIVATE_H__ */