blob: 25d0847f44ff6f4416ef46612fb37ff95931c0e6 [file] [log] [blame]
#
# Copyright 2022 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
#
#------------------------------------------------------------------------------
#
# This file contains the basic architecture definitions that drive the build
#
# -----------------------------------------------------------------------------
CORE_TYPE := a53
CACHE_LINE := 6
# Set to GIC400 or GIC500
GIC := GIC500
# Set to CCI400 or CCN504 or CCN508
INTERCONNECT := CCI400
# Select the DDR PHY generation to be used
PLAT_DDR_PHY := PHY_GEN1
PHYS_SYS := 64
# Indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
CHASSIS := 3
# TZC IP Details TZC used is TZC380 or TZC400
TZC_ID := TZC400
# CONSOLE Details available is NS16550 or PL011
CONSOLE := NS16550
NXP_SFP_VER := 3_4
# In IMAGE_BL2, compile time flag for handling Cache coherency
# with CAAM for BL2 running from OCRAM
SEC_MEM_NON_COHERENT := yes
# OCRAM MAP for BL2
# Before BL2
# 0x18000000 - 0x18009fff -> Used by ROM code, (TBD - can it be used for xlat tables)
# 0x1800a000 - 0x1801Cfff -> Reserved for BL2 binary (76 KB)
# 0x1801D000 - 0x1801ffff -> CSF header for BL2 (12 KB)
OCRAM_START_ADDR := 0x18000000
OCRAM_SIZE := 0x20000
CSF_HDR_SZ := 0x3000
# Area of OCRAM reserved by ROM code
NXP_ROM_RSVD := 0xa000
# Input to CST create_hdr_isbc tool
BL2_HDR_LOC := 0x1801D000
# Location of BL2 on OCRAM
# BL2_BASE=OCRAM_START_ADDR+NXP_ROM_RSVD
BL2_BASE := 0x1800a000
# SoC ERRATUM to be enabled
ERRATA_SOC_A008850 := 1
# ARM Erratum
ERRATA_A53_855873 := 1
# DDR Erratum
ERRATA_DDR_A008511 := 1
ERRATA_DDR_A009803 := 1
ERRATA_DDR_A009942 := 1
ERRATA_DDR_A010165 := 1
# Define Endianness of each module
NXP_ESDHC_ENDIANNESS := LE
NXP_SFP_ENDIANNESS := LE
NXP_GPIO_ENDIANNESS := LE
NXP_SNVS_ENDIANNESS := LE
NXP_GUR_ENDIANNESS := LE
NXP_SEC_ENDIANNESS := LE
NXP_DDR_ENDIANNESS := LE
NXP_QSPI_ENDIANNESS := LE
# OCRAM ECC Enabled
OCRAM_ECC_EN := yes