feat(ls1088a): add new SoC platform ls1088a
LS1088A is a cost-effective, powerefficient, and highly integrated
SoC device featuring eight extremely power-efficient 64-bit ARM
Cortex-A53 cores with ECC-protected L1 and L2 cache memories for
high reliability, running up to 1.6 GHz.
This patch is to add ls1088a SoC support in TF-A.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id9ebcdad1beab07ea81a41955edd4f471d6cf090
diff --git a/plat/nxp/soc-ls1088a/soc.def b/plat/nxp/soc-ls1088a/soc.def
new file mode 100644
index 0000000..25d0847
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/soc.def
@@ -0,0 +1,87 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+#------------------------------------------------------------------------------
+#
+# This file contains the basic architecture definitions that drive the build
+#
+# -----------------------------------------------------------------------------
+
+CORE_TYPE := a53
+
+CACHE_LINE := 6
+
+# Set to GIC400 or GIC500
+GIC := GIC500
+
+# Set to CCI400 or CCN504 or CCN508
+INTERCONNECT := CCI400
+
+# Select the DDR PHY generation to be used
+PLAT_DDR_PHY := PHY_GEN1
+
+PHYS_SYS := 64
+
+# Indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
+CHASSIS := 3
+
+# TZC IP Details TZC used is TZC380 or TZC400
+TZC_ID := TZC400
+
+# CONSOLE Details available is NS16550 or PL011
+CONSOLE := NS16550
+
+NXP_SFP_VER := 3_4
+
+# In IMAGE_BL2, compile time flag for handling Cache coherency
+# with CAAM for BL2 running from OCRAM
+SEC_MEM_NON_COHERENT := yes
+
+
+# OCRAM MAP for BL2
+# Before BL2
+# 0x18000000 - 0x18009fff -> Used by ROM code, (TBD - can it be used for xlat tables)
+# 0x1800a000 - 0x1801Cfff -> Reserved for BL2 binary (76 KB)
+# 0x1801D000 - 0x1801ffff -> CSF header for BL2 (12 KB)
+OCRAM_START_ADDR := 0x18000000
+OCRAM_SIZE := 0x20000
+
+CSF_HDR_SZ := 0x3000
+
+# Area of OCRAM reserved by ROM code
+NXP_ROM_RSVD := 0xa000
+
+# Input to CST create_hdr_isbc tool
+BL2_HDR_LOC := 0x1801D000
+
+# Location of BL2 on OCRAM
+# BL2_BASE=OCRAM_START_ADDR+NXP_ROM_RSVD
+BL2_BASE := 0x1800a000
+
+# SoC ERRATUM to be enabled
+ERRATA_SOC_A008850 := 1
+
+# ARM Erratum
+ERRATA_A53_855873 := 1
+
+# DDR Erratum
+ERRATA_DDR_A008511 := 1
+ERRATA_DDR_A009803 := 1
+ERRATA_DDR_A009942 := 1
+ERRATA_DDR_A010165 := 1
+
+# Define Endianness of each module
+NXP_ESDHC_ENDIANNESS := LE
+NXP_SFP_ENDIANNESS := LE
+NXP_GPIO_ENDIANNESS := LE
+NXP_SNVS_ENDIANNESS := LE
+NXP_GUR_ENDIANNESS := LE
+NXP_SEC_ENDIANNESS := LE
+NXP_DDR_ENDIANNESS := LE
+NXP_QSPI_ENDIANNESS := LE
+
+# OCRAM ECC Enabled
+OCRAM_ECC_EN := yes