include/drivers/arm/gicv2.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #ifndef __GICV2_H__
 #define __GICV2_H__

 /*******************************************************************************
  * GICv2 miscellaneous definitions
  ******************************************************************************/

 /* Interrupt group definitions */
 #define GICV2_INTR_GROUP0	0
 #define GICV2_INTR_GROUP1	1

 /* Interrupt IDs reported by the HPPIR and IAR registers */
 #define PENDING_G1_INTID	1022

 /* GICv2 can only target up to 8 PEs */
 #define GICV2_MAX_TARGET_PE	8

 /*******************************************************************************
  * GICv2 specific Distributor interface register offsets and constants.
  ******************************************************************************/
 #define GICD_ITARGETSR		0x800
 #define GICD_SGIR		0xF00
 #define GICD_CPENDSGIR		0xF10
 #define GICD_SPENDSGIR		0xF20
 #define GICD_PIDR2_GICV2	0xFE8

 #define ITARGETSR_SHIFT		2
 #define GIC_TARGET_CPU_MASK	0xff

 #define CPENDSGIR_SHIFT		2
 #define SPENDSGIR_SHIFT		CPENDSGIR_SHIFT

 #define SGIR_TGTLSTFLT_SHIFT	24
 #define SGIR_TGTLSTFLT_MASK	0x3
 #define SGIR_TGTLST_SHIFT	16
 #define SGIR_TGTLST_MASK	0xff
 #define SGIR_INTID_MASK		0xf

 #define SGIR_TGT_SPECIFIC	0

 #define GICV2_SGIR_VALUE(tgt_lst_flt, tgt, intid) \
 	((((tgt_lst_flt) & SGIR_TGTLSTFLT_MASK) << SGIR_TGTLSTFLT_SHIFT) | \
 	 (((tgt) & SGIR_TGTLST_MASK) << SGIR_TGTLST_SHIFT) | \
 	 ((intid) & SGIR_INTID_MASK))

 /*******************************************************************************
  * GICv2 specific CPU interface register offsets and constants.
  ******************************************************************************/
 /* Physical CPU Interface registers */
 #define GICC_CTLR		0x0
 #define GICC_PMR		0x4
 #define GICC_BPR		0x8
 #define GICC_IAR		0xC
 #define GICC_EOIR		0x10
 #define GICC_RPR		0x14
 #define GICC_HPPIR		0x18
 #define GICC_AHPPIR		0x28
 #define GICC_IIDR		0xFC
 #define GICC_DIR		0x1000
 #define GICC_PRIODROP		GICC_EOIR

 /* GICC_CTLR bit definitions */
 #define EOI_MODE_NS		(1 << 10)
 #define EOI_MODE_S		(1 << 9)
 #define IRQ_BYP_DIS_GRP1	(1 << 8)
 #define FIQ_BYP_DIS_GRP1	(1 << 7)
 #define IRQ_BYP_DIS_GRP0	(1 << 6)
 #define FIQ_BYP_DIS_GRP0	(1 << 5)
 #define CBPR			(1 << 4)
 #define FIQ_EN_SHIFT		3
 #define FIQ_EN_BIT		(1 << FIQ_EN_SHIFT)
 #define ACK_CTL			(1 << 2)

 /* GICC_IIDR bit masks and shifts */
 #define GICC_IIDR_PID_SHIFT	20
 #define GICC_IIDR_ARCH_SHIFT	16
 #define GICC_IIDR_REV_SHIFT	12
 #define GICC_IIDR_IMP_SHIFT	0

 #define GICC_IIDR_PID_MASK	0xfff
 #define GICC_IIDR_ARCH_MASK	0xf
 #define GICC_IIDR_REV_MASK	0xf
 #define GICC_IIDR_IMP_MASK	0xfff

 /* HYP view virtual CPU Interface registers */
 #define GICH_CTL		0x0
 #define GICH_VTR		0x4
 #define GICH_ELRSR0		0x30
 #define GICH_ELRSR1		0x34
 #define GICH_APR0		0xF0
 #define GICH_LR_BASE		0x100

 /* Virtual CPU Interface registers */
 #define GICV_CTL		0x0
 #define GICV_PRIMASK		0x4
 #define GICV_BP			0x8
 #define GICV_INTACK		0xC
 #define GICV_EOI		0x10
 #define GICV_RUNNINGPRI		0x14
 #define GICV_HIGHESTPEND	0x18
 #define GICV_DEACTIVATE		0x1000

 /* GICD_CTLR bit definitions */
 #define CTLR_ENABLE_G1_SHIFT		1
 #define CTLR_ENABLE_G1_MASK		0x1
 #define CTLR_ENABLE_G1_BIT		(1 << CTLR_ENABLE_G1_SHIFT)

 /* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
 #define INT_ID_MASK		0x3ff

 #ifndef __ASSEMBLY__

 #include <interrupt_props.h>
 #include <stdint.h>

 /*******************************************************************************
  * This structure describes some of the implementation defined attributes of
  * the GICv2 IP. It is used by the platform port to specify these attributes
  * in order to initialize the GICv2 driver. The attributes are described
  * below.
  *
  * The 'gicd_base' field contains the base address of the Distributor interface
  * programmer's view.
  *
  * The 'gicc_base' field contains the base address of the CPU Interface
  * programmer's view.
  *
  * The 'g0_interrupt_array' field is a pointer to an array in which each entry
  * corresponds to an ID of a Group 0 interrupt. This field is ignored when
  * 'interrupt_props' field is used. This field is deprecated.
  *
  * The 'g0_interrupt_num' field contains the number of entries in the
  * 'g0_interrupt_array'. This field is ignored when 'interrupt_props' field is
  * used. This field is deprecated.
  *
  * The 'target_masks' is a pointer to an array containing 'target_masks_num'
  * elements. The GIC driver will populate the array with per-PE target mask to
  * use to when targeting interrupts.
  *
  * The 'interrupt_props' field is a pointer to an array that enumerates secure
  * interrupts and their properties. If this field is not NULL, both
  * 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
  *
  * The 'interrupt_props_num' field contains the number of entries in the
  * 'interrupt_props' array. If this field is non-zero, 'g0_interrupt_num' is
  * ignored.
  ******************************************************************************/
 typedef struct gicv2_driver_data {
 	uintptr_t gicd_base;
 	uintptr_t gicc_base;
 #if !ERROR_DEPRECATED
 	unsigned int g0_interrupt_num __deprecated;
 	const unsigned int *g0_interrupt_array __deprecated;
 #endif
 	unsigned int *target_masks;
 	unsigned int target_masks_num;
 	const interrupt_prop_t *interrupt_props;
 	unsigned int interrupt_props_num;
 } gicv2_driver_data_t;

 /*******************************************************************************
  * Function prototypes
  ******************************************************************************/
 void gicv2_driver_init(const gicv2_driver_data_t *plat_driver_data);
 void gicv2_distif_init(void);
 void gicv2_pcpu_distif_init(void);
 void gicv2_cpuif_enable(void);
 void gicv2_cpuif_disable(void);
 unsigned int gicv2_is_fiq_enabled(void);
 unsigned int gicv2_get_pending_interrupt_type(void);
 unsigned int gicv2_get_pending_interrupt_id(void);
 unsigned int gicv2_acknowledge_interrupt(void);
 void gicv2_end_of_interrupt(unsigned int id);
 unsigned int gicv2_get_interrupt_group(unsigned int id);
 unsigned int gicv2_get_running_priority(void);
 void gicv2_set_pe_target_mask(unsigned int proc_num);
 unsigned int gicv2_get_interrupt_active(unsigned int id);
 void gicv2_enable_interrupt(unsigned int id);
 void gicv2_disable_interrupt(unsigned int id);
 void gicv2_set_interrupt_priority(unsigned int id, unsigned int priority);
 void gicv2_set_interrupt_type(unsigned int id, unsigned int type);
 void gicv2_raise_sgi(int sgi_num, int proc_num);
 void gicv2_set_spi_routing(unsigned int id, int proc_num);
 void gicv2_set_interrupt_pending(unsigned int id);
 void gicv2_clear_interrupt_pending(unsigned int id);
 unsigned int gicv2_set_pmr(unsigned int mask);

 #endif /* __ASSEMBLY__ */
 #endif /* __GICV2_H__ */
	/*
	* Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#ifndef __GICV2_H__
	#define __GICV2_H__

	/*******************************************************************************
	* GICv2 miscellaneous definitions
	******************************************************************************/

	/* Interrupt group definitions */
	#define GICV2_INTR_GROUP0 0
	#define GICV2_INTR_GROUP1 1

	/* Interrupt IDs reported by the HPPIR and IAR registers */
	#define PENDING_G1_INTID 1022

	/* GICv2 can only target up to 8 PEs */
	#define GICV2_MAX_TARGET_PE 8

	/*******************************************************************************
	* GICv2 specific Distributor interface register offsets and constants.
	******************************************************************************/
	#define GICD_ITARGETSR 0x800
	#define GICD_SGIR 0xF00
	#define GICD_CPENDSGIR 0xF10
	#define GICD_SPENDSGIR 0xF20
	#define GICD_PIDR2_GICV2 0xFE8

	#define ITARGETSR_SHIFT 2
	#define GIC_TARGET_CPU_MASK 0xff

	#define CPENDSGIR_SHIFT 2
	#define SPENDSGIR_SHIFT CPENDSGIR_SHIFT

	#define SGIR_TGTLSTFLT_SHIFT 24
	#define SGIR_TGTLSTFLT_MASK 0x3
	#define SGIR_TGTLST_SHIFT 16
	#define SGIR_TGTLST_MASK 0xff
	#define SGIR_INTID_MASK 0xf

	#define SGIR_TGT_SPECIFIC 0

	#define GICV2_SGIR_VALUE(tgt_lst_flt, tgt, intid) \
	((((tgt_lst_flt) & SGIR_TGTLSTFLT_MASK) << SGIR_TGTLSTFLT_SHIFT) \| \
	(((tgt) & SGIR_TGTLST_MASK) << SGIR_TGTLST_SHIFT) \| \
	((intid) & SGIR_INTID_MASK))

	/*******************************************************************************
	* GICv2 specific CPU interface register offsets and constants.
	******************************************************************************/
	/* Physical CPU Interface registers */
	#define GICC_CTLR 0x0
	#define GICC_PMR 0x4
	#define GICC_BPR 0x8
	#define GICC_IAR 0xC
	#define GICC_EOIR 0x10
	#define GICC_RPR 0x14
	#define GICC_HPPIR 0x18
	#define GICC_AHPPIR 0x28
	#define GICC_IIDR 0xFC
	#define GICC_DIR 0x1000
	#define GICC_PRIODROP GICC_EOIR

	/* GICC_CTLR bit definitions */
	#define EOI_MODE_NS (1 << 10)
	#define EOI_MODE_S (1 << 9)
	#define IRQ_BYP_DIS_GRP1 (1 << 8)
	#define FIQ_BYP_DIS_GRP1 (1 << 7)
	#define IRQ_BYP_DIS_GRP0 (1 << 6)
	#define FIQ_BYP_DIS_GRP0 (1 << 5)
	#define CBPR (1 << 4)
	#define FIQ_EN_SHIFT 3
	#define FIQ_EN_BIT (1 << FIQ_EN_SHIFT)
	#define ACK_CTL (1 << 2)

	/* GICC_IIDR bit masks and shifts */
	#define GICC_IIDR_PID_SHIFT 20
	#define GICC_IIDR_ARCH_SHIFT 16
	#define GICC_IIDR_REV_SHIFT 12
	#define GICC_IIDR_IMP_SHIFT 0

	#define GICC_IIDR_PID_MASK 0xfff
	#define GICC_IIDR_ARCH_MASK 0xf
	#define GICC_IIDR_REV_MASK 0xf
	#define GICC_IIDR_IMP_MASK 0xfff

	/* HYP view virtual CPU Interface registers */
	#define GICH_CTL 0x0
	#define GICH_VTR 0x4
	#define GICH_ELRSR0 0x30
	#define GICH_ELRSR1 0x34
	#define GICH_APR0 0xF0
	#define GICH_LR_BASE 0x100

	/* Virtual CPU Interface registers */
	#define GICV_CTL 0x0
	#define GICV_PRIMASK 0x4
	#define GICV_BP 0x8
	#define GICV_INTACK 0xC
	#define GICV_EOI 0x10
	#define GICV_RUNNINGPRI 0x14
	#define GICV_HIGHESTPEND 0x18
	#define GICV_DEACTIVATE 0x1000

	/* GICD_CTLR bit definitions */
	#define CTLR_ENABLE_G1_SHIFT 1
	#define CTLR_ENABLE_G1_MASK 0x1
	#define CTLR_ENABLE_G1_BIT (1 << CTLR_ENABLE_G1_SHIFT)

	/* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
	#define INT_ID_MASK 0x3ff

	#ifndef __ASSEMBLY__

	#include <interrupt_props.h>
	#include <stdint.h>

	/*******************************************************************************
	* This structure describes some of the implementation defined attributes of
	* the GICv2 IP. It is used by the platform port to specify these attributes
	* in order to initialize the GICv2 driver. The attributes are described
	* below.
	*
	* The 'gicd_base' field contains the base address of the Distributor interface
	* programmer's view.
	*
	* The 'gicc_base' field contains the base address of the CPU Interface
	* programmer's view.
	*
	* The 'g0_interrupt_array' field is a pointer to an array in which each entry
	* corresponds to an ID of a Group 0 interrupt. This field is ignored when
	* 'interrupt_props' field is used. This field is deprecated.
	*
	* The 'g0_interrupt_num' field contains the number of entries in the
	* 'g0_interrupt_array'. This field is ignored when 'interrupt_props' field is
	* used. This field is deprecated.
	*
	* The 'target_masks' is a pointer to an array containing 'target_masks_num'
	* elements. The GIC driver will populate the array with per-PE target mask to
	* use to when targeting interrupts.
	*
	* The 'interrupt_props' field is a pointer to an array that enumerates secure
	* interrupts and their properties. If this field is not NULL, both
	* 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
	*
	* The 'interrupt_props_num' field contains the number of entries in the
	* 'interrupt_props' array. If this field is non-zero, 'g0_interrupt_num' is
	* ignored.
	******************************************************************************/
	typedef struct gicv2_driver_data {
	uintptr_t gicd_base;
	uintptr_t gicc_base;
	#if !ERROR_DEPRECATED
	unsigned int g0_interrupt_num __deprecated;
	const unsigned int *g0_interrupt_array __deprecated;
	#endif
	unsigned int *target_masks;
	unsigned int target_masks_num;
	const interrupt_prop_t *interrupt_props;
	unsigned int interrupt_props_num;
	} gicv2_driver_data_t;

	/*******************************************************************************
	* Function prototypes
	******************************************************************************/
	void gicv2_driver_init(const gicv2_driver_data_t *plat_driver_data);
	void gicv2_distif_init(void);
	void gicv2_pcpu_distif_init(void);
	void gicv2_cpuif_enable(void);
	void gicv2_cpuif_disable(void);
	unsigned int gicv2_is_fiq_enabled(void);
	unsigned int gicv2_get_pending_interrupt_type(void);
	unsigned int gicv2_get_pending_interrupt_id(void);
	unsigned int gicv2_acknowledge_interrupt(void);
	void gicv2_end_of_interrupt(unsigned int id);
	unsigned int gicv2_get_interrupt_group(unsigned int id);
	unsigned int gicv2_get_running_priority(void);
	void gicv2_set_pe_target_mask(unsigned int proc_num);
	unsigned int gicv2_get_interrupt_active(unsigned int id);
	void gicv2_enable_interrupt(unsigned int id);
	void gicv2_disable_interrupt(unsigned int id);
	void gicv2_set_interrupt_priority(unsigned int id, unsigned int priority);
	void gicv2_set_interrupt_type(unsigned int id, unsigned int type);
	void gicv2_raise_sgi(int sgi_num, int proc_num);
	void gicv2_set_spi_routing(unsigned int id, int proc_num);
	void gicv2_set_interrupt_pending(unsigned int id);
	void gicv2_clear_interrupt_pending(unsigned int id);
	unsigned int gicv2_set_pmr(unsigned int mask);

	#endif /* __ASSEMBLY__ */
	#endif /* __GICV2_H__ */