blob: c9acb49112a1a4f11845b5efea1f5a4d7c71afef [file] [log] [blame]
#
# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
N1SDP_BASE := plat/arm/board/n1sdp
INTERCONNECT_SOURCES := ${N1SDP_BASE}/n1sdp_interconnect.c
PLAT_INCLUDES := -I${N1SDP_BASE}/include
N1SDP_CPU_SOURCES := lib/cpus/aarch64/cortex_ares.S
N1SDP_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v3/gicv3_main.c \
drivers/arm/gic/v3/gicv3_helpers.c \
plat/common/plat_gicv3.c \
plat/arm/common/arm_gicv3.c \
drivers/arm/gic/v3/gic600.c
PLAT_BL_COMMON_SOURCES := ${N1SDP_BASE}/n1sdp_plat.c \
${N1SDP_BASE}/aarch64/n1sdp_helper.S
BL31_SOURCES := ${N1SDP_CPU_SOURCES} \
${INTERCONNECT_SOURCES} \
${N1SDP_GIC_SOURCES} \
${N1SDP_BASE}/n1sdp_bl31_setup.c \
${N1SDP_BASE}/n1sdp_topology.c \
${N1SDP_BASE}/n1sdp_security.c
# TF-A not required to load the SCP Images
override CSS_LOAD_SCP_IMAGES := 0
# BL1/BL2 Image not a part of the capsule Image for n1sdp
override NEED_BL1 := no
override NEED_BL2 := no
override NEED_BL2U := no
#TFA for n1sdp starts from BL31
override RESET_TO_BL31 := 1
# 32 bit mode not supported
override CTX_INCLUDE_AARCH32_REGS := 0
override ARM_PLAT_MT := 1
# Select SCMI/SDS drivers instead of SCPI/BOM driver for communicating with the
# SCP during power management operations and for SCP RAM Firmware transfer.
CSS_USE_SCMI_SDS_DRIVER := 1
# System coherency is managed in hardware
HW_ASSISTED_COHERENCY := 1
# When building for systems with hardware-assisted coherency, there's no need to
# use USE_COHERENT_MEM. Require that USE_COHERENT_MEM must be set to 0 too.
USE_COHERENT_MEM := 0
include plat/arm/common/arm_common.mk
include plat/arm/css/common/css_common.mk
include plat/arm/soc/common/soc_css.mk
include plat/arm/board/common/board_common.mk