| /* |
| * Copyright 2021-2022 NXP |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| * |
| */ |
| |
| #include <stdbool.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include <getopt.h> |
| #include <unistd.h> |
| |
| #define NUM_MEM_BLOCK 1 |
| #define FOUR_BYTE_ALIGN 4 |
| #define EIGHT_BYTE_ALIGN 8 |
| #define SIZE_TWO_PBL_CMD 24 |
| |
| /* Define for add_boot_ptr_cmd() */ |
| #define BOOTPTR_ADDR 0x09570604 |
| #define CSF_ADDR_SB 0x09ee0200 |
| /* CCSR write command to address 0x1e00400 i.e BOOTLOCPTR */ |
| #define BOOTPTR_ADDR_CH3 0x31e00400 |
| /* Load CSF header command */ |
| #define CSF_ADDR_SB_CH3 0x80220000 |
| |
| #define MAND_ARG_MASK 0xFFF3 |
| #define ARG_INIT_MASK 0xFF00 |
| #define RCW_FILE_NAME_ARG_MASK 0x0080 |
| #define IN_FILE_NAME_ARG_MASK 0x0040 |
| #define CHASSIS_ARG_MASK 0x0020 |
| #define BOOT_SRC_ARG_MASK 0x0010 |
| #define ENTRY_POINT_ADDR_ARG_MASK 0x0008 |
| #define BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK 0x0004 |
| #define BL2_BIN_CPY_DEST_ADDR_ARG_MASK 0x0002 |
| #define OP_FILE_NAME_ARG_MASK 0x0001 |
| |
| /* Define for add_cpy_cmd() */ |
| #define OFFSET_MASK 0x00ffffff |
| #define WRITE_CMD_BASE 0x81000000 |
| #define MAX_PBI_DATA_LEN_BYTE 64 |
| |
| /* 140 Bytes = Preamble + LOAD RCW command + RCW (128 bytes) + Checksum */ |
| #define CHS3_CRC_PAYLOAD_START_OFFSET 140 |
| |
| #define PBI_CRC_POLYNOMIAL 0x04c11db7 |
| |
| typedef enum { |
| CHASSIS_UNKNOWN, |
| CHASSIS_2, |
| CHASSIS_3, |
| CHASSIS_3_2, |
| CHASSIS_MAX /* must be last item in list */ |
| } chassis_t; |
| |
| typedef enum { |
| UNKNOWN_BOOT = 0, |
| IFC_NOR_BOOT, |
| IFC_NAND_BOOT, |
| QSPI_BOOT, |
| SD_BOOT, |
| EMMC_BOOT, |
| FLXSPI_NOR_BOOT, |
| FLXSPI_NAND_BOOT, |
| FLXSPI_NAND4K_BOOT, |
| MAX_BOOT /* must be last item in list */ |
| } boot_src_t; |
| |
| /* Base Addresses where PBL image is copied depending on the boot source. |
| * Boot address map varies as per Chassis architecture. |
| */ |
| #define BASE_ADDR_UNDEFINED 0xFFFFFFFF |
| #define BASE_ADDR_QSPI 0x20000000 |
| #define BASE_ADDR_SD 0x00001000 |
| #define BASE_ADDR_IFC_NOR 0x30000000 |
| #define BASE_ADDR_EMMC 0x00001000 |
| #define BASE_ADDR_FLX_NOR 0x20000000 |
| #define BASE_ADDR_NAND 0x20000000 |
| |
| uint32_t base_addr_ch3[MAX_BOOT] = { |
| BASE_ADDR_UNDEFINED, |
| BASE_ADDR_IFC_NOR, |
| BASE_ADDR_UNDEFINED, /*IFC NAND */ |
| BASE_ADDR_QSPI, |
| BASE_ADDR_SD, |
| BASE_ADDR_EMMC, |
| BASE_ADDR_UNDEFINED, /*FLXSPI NOR */ |
| BASE_ADDR_UNDEFINED, /*FLXSPI NAND 2K */ |
| BASE_ADDR_UNDEFINED /*FLXSPI NAND 4K */ |
| }; |
| |
| uint32_t base_addr_ch32[MAX_BOOT] = { |
| BASE_ADDR_UNDEFINED, |
| BASE_ADDR_UNDEFINED, /* IFC NOR */ |
| BASE_ADDR_UNDEFINED, /* IFC NAND */ |
| BASE_ADDR_UNDEFINED, /* QSPI */ |
| BASE_ADDR_SD, |
| BASE_ADDR_EMMC, |
| BASE_ADDR_FLX_NOR, |
| BASE_ADDR_UNDEFINED, /*FLXSPI NAND 2K */ |
| BASE_ADDR_UNDEFINED /*FLXSPI NAND 4K */ |
| }; |
| |
| /* for Chassis 3 */ |
| uint32_t blk_cpy_hdr_map_ch3[] = { |
| |
| 0, /* Unknown Boot Source */ |
| 0x80000020, /* NOR_BOOT */ |
| 0x0, /* NAND_BOOT */ |
| 0x80000062, /* QSPI_BOOT */ |
| 0x80000040, /* SD_BOOT */ |
| 0x80000041, /* EMMC_BOOT */ |
| 0x0, /* FLEXSPI NOR_BOOT */ |
| 0x0, /* FLEX SPI NAND2K BOOT */ |
| 0x0, /* CHASIS3_2_NAND4K_BOOT */ |
| }; |
| |
| uint32_t blk_cpy_hdr_map_ch32[] = { |
| 0, /* Unknown Boot Source */ |
| 0x0, /* NOR_BOOT */ |
| 0x0, /* NAND_BOOT */ |
| 0x0, /* QSPI_BOOT */ |
| 0x80000008, /* SD_BOOT */ |
| 0x80000009, /* EMMC_BOOT */ |
| 0x8000000F, /* FLEXSPI NOR_BOOT */ |
| 0x8000000C, /* FLEX SPI NAND2K BOOT */ |
| 0x8000000D, /* CHASIS3_2_NAND4K_BOOT */ |
| }; |
| |
| char *boot_src_string[] = { |
| "UNKNOWN_BOOT", |
| "IFC_NOR_BOOT", |
| "IFC_NAND_BOOT", |
| "QSPI_BOOT", |
| "SD_BOOT", |
| "EMMC_BOOT", |
| "FLXSPI_NOR_BOOT", |
| "FLXSPI_NAND_BOOT", |
| "FLXSPI_NAND4K_BOOT", |
| }; |
| |
| enum stop_command { |
| STOP_COMMAND = 0, |
| CRC_STOP_COMMAND |
| }; |
| |
| /* Structure will get populated in the main function |
| * as part of parsing the command line arguments. |
| * All member parameters are mandatory except: |
| * -ep |
| * -src_addr |
| */ |
| struct pbl_image { |
| char *rcw_nm; /* Input RCW File */ |
| char *sec_imgnm; /* Input BL2 binary */ |
| char *imagefile; /* Generated output file */ |
| boot_src_t boot_src; /* Boot Source - QSPI, SD, NOR, NAND etc */ |
| uint32_t src_addr; /* Source Address */ |
| uint32_t addr; /* Load address */ |
| uint32_t ep; /* Entry point <opt> default is load address */ |
| chassis_t chassis; /* Chassis type */ |
| } pblimg; |
| |
| #define SUCCESS 0 |
| #define FAILURE -1 |
| #define CRC_STOP_CMD_ARM 0x08610040 |
| #define CRC_STOP_CMD_ARM_CH3 0x808f0000 |
| #define STOP_CMD_ARM_CH3 0x80ff0000 |
| #define BYTE_SWAP_32(word) ((((word) & 0xff000000) >> 24)| \ |
| (((word) & 0x00ff0000) >> 8) | \ |
| (((word) & 0x0000ff00) << 8) | \ |
| (((word) & 0x000000ff) << 24)) |
| |
| #define PBI_LEN_MASK 0xFFF00000 |
| #define PBI_LEN_SHIFT 20 |
| #define NUM_RCW_WORD 35 |
| #define PBI_LEN_ADD 6 |
| |
| #define MAX_CRC_ENTRIES 256 |
| |
| /* SoC numeric identifier */ |
| #define SOC_LS1012 1012 |
| #define SOC_LS1023 1023 |
| #define SOC_LS1026 1026 |
| #define SOC_LS1028 1028 |
| #define SOC_LS1043 1043 |
| #define SOC_LS1046 1046 |
| #define SOC_LS1088 1088 |
| #define SOC_LS2080 2080 |
| #define SOC_LS2088 2088 |
| #define SOC_LX2160 2160 |
| |
| static uint32_t pbl_size; |
| bool sb_flag; |
| |
| /*************************************************************************** |
| * Description : CRC32 Lookup Table |
| ***************************************************************************/ |
| static uint32_t crc32_lookup[] = { |
| 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, |
| 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, |
| 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, |
| 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, |
| 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, |
| 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, |
| 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, |
| 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, |
| 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, |
| 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, |
| 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, |
| 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, |
| 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, |
| 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, |
| 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, |
| 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, |
| 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, |
| 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, |
| 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, |
| 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, |
| 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, |
| 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, |
| 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, |
| 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, |
| 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, |
| 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, |
| 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, |
| 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, |
| 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, |
| 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, |
| 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, |
| 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, |
| 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, |
| 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, |
| 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, |
| 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, |
| 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, |
| 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, |
| 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, |
| 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, |
| 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, |
| 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, |
| 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, |
| 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, |
| 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, |
| 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, |
| 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, |
| 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, |
| 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, |
| 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, |
| 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, |
| 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, |
| 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, |
| 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, |
| 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, |
| 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, |
| 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, |
| 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, |
| 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, |
| 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, |
| 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, |
| 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, |
| 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, |
| 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D |
| }; |
| |
| |
| static void print_usage(void) |
| { |
| printf("\nCorrect Usage of Tool is:\n"); |
| printf("\n ./create_pbl [options] (mentioned below):\n\n"); |
| printf("\t-r <RCW file-name> - name of RCW binary file.\n"); |
| printf("\t-i <BL2 Bin file-name> - file to be added to rcw file.\n"); |
| printf("\t-c <Number> - Chassis Architecture (=2 or =3\n"); |
| printf("\t or =4 for 3.2).\n"); |
| printf("\t-b <qspi/nor/nand/sd> - Boot source.\n"); |
| printf("\t-d <Address> - Destination address where BL2\n"); |
| printf("\t image is to be copied\n"); |
| printf("\t-o <output filename> - Name of PBL image generated\n"); |
| printf("\t as an output of the tool.\n"); |
| printf("\t-f <Address> - BL2 image Src Offset\n"); |
| printf("\t on Boot Source for block copy.\n"); |
| printf("\t command for chassis >=3.)\n"); |
| printf("\t-e <Address> - [Optional] Entry Point Address\n"); |
| printf("\t of the BL2.bin\n"); |
| printf("\t-s Secure Boot.\n"); |
| printf("\t-h Help.\n"); |
| printf("\n\n"); |
| exit(0); |
| |
| } |
| |
| /*************************************************************************** |
| * Function : crypto_calculate_checksum() |
| * Arguments : data - Pointer to FILE |
| * num - Number of 32 bit words for checksum |
| * Return : Checksum Value |
| * Description : Calculate Checksum over the data |
| ***************************************************************************/ |
| uint32_t crypto_calculate_checksum(FILE *fp_rcw_pbi_op, uint32_t num) |
| { |
| uint32_t i; |
| uint64_t sum = 0; |
| uint32_t word; |
| |
| fseek(fp_rcw_pbi_op, 0L, SEEK_SET); |
| for (i = 0; i < num ; i++) { |
| if ((fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_op)) |
| < NUM_MEM_BLOCK) { |
| printf("%s: Error reading word.\n", __func__); |
| return FAILURE; |
| } |
| sum = sum + word; |
| sum = sum & 0xFFFFFFFF; |
| } |
| return (uint32_t)sum; |
| } |
| |
| /*************************************************************************** |
| * Function : add_pbi_stop_cmd |
| * Arguments : fp_rcw_pbi_op - output rcw_pbi file pointer |
| * Return : SUCCESS or FAILURE |
| * Description : This function insert pbi stop command. |
| ***************************************************************************/ |
| int add_pbi_stop_cmd(FILE *fp_rcw_pbi_op, enum stop_command flag) |
| { |
| int ret = FAILURE; |
| int32_t pbi_stop_cmd; |
| uint32_t pbi_crc = 0xffffffff, i, j, c; |
| uint32_t crc_table[MAX_CRC_ENTRIES]; |
| uint8_t data; |
| |
| switch (pblimg.chassis) { |
| case CHASSIS_2: |
| pbi_stop_cmd = BYTE_SWAP_32(CRC_STOP_CMD_ARM); |
| break; |
| case CHASSIS_3: |
| case CHASSIS_3_2: |
| /* Based on flag add the corresponsding cmd |
| * -- stop cmd or stop with CRC cmd |
| */ |
| if (flag == CRC_STOP_COMMAND) { |
| pbi_stop_cmd = CRC_STOP_CMD_ARM_CH3; |
| } else { |
| pbi_stop_cmd = STOP_CMD_ARM_CH3; |
| } |
| break; |
| case CHASSIS_UNKNOWN: |
| case CHASSIS_MAX: |
| default: |
| printf("Internal Error: Invalid Chassis val = %d.\n", |
| pblimg.chassis); |
| goto pbi_stop_err; |
| } |
| |
| if (fwrite(&pbi_stop_cmd, sizeof(pbi_stop_cmd), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error in Writing PBI STOP CMD\n", __func__); |
| goto pbi_stop_err; |
| } |
| |
| if (flag == CRC_STOP_COMMAND) { |
| for (i = 0; i < MAX_CRC_ENTRIES; i++) { |
| c = i << 24; |
| for (j = 0; j < 8; j++) { |
| c = (c & 0x80000000) ? |
| PBI_CRC_POLYNOMIAL ^ (c << 1) : c << 1; |
| } |
| |
| crc_table[i] = c; |
| } |
| } |
| |
| switch (pblimg.chassis) { |
| case CHASSIS_2: |
| /* Chassis 2: CRC is calculated on RCW + PBL cmd.*/ |
| fseek(fp_rcw_pbi_op, 0L, SEEK_SET); |
| break; |
| case CHASSIS_3: |
| case CHASSIS_3_2: |
| /* Chassis 3: CRC is calculated on PBL cmd only. */ |
| fseek(fp_rcw_pbi_op, CHS3_CRC_PAYLOAD_START_OFFSET, SEEK_SET); |
| break; |
| case CHASSIS_UNKNOWN: |
| case CHASSIS_MAX: |
| printf("%s: Unknown Chassis.\n", __func__); |
| goto pbi_stop_err; |
| } |
| |
| while ((fread(&data, sizeof(data), NUM_MEM_BLOCK, fp_rcw_pbi_op)) |
| == NUM_MEM_BLOCK) { |
| if (flag == CRC_STOP_COMMAND) { |
| if (pblimg.chassis == CHASSIS_2) { |
| pbi_crc = crc_table |
| [((pbi_crc >> 24) ^ (data)) & 0xff] ^ |
| (pbi_crc << 8); |
| } else { |
| pbi_crc = (pbi_crc >> 8) ^ |
| crc32_lookup[((pbi_crc) ^ |
| (data)) & 0xff]; |
| } |
| } |
| } |
| |
| switch (pblimg.chassis) { |
| case CHASSIS_2: |
| pbi_crc = BYTE_SWAP_32(pbi_crc); |
| break; |
| case CHASSIS_3: |
| case CHASSIS_3_2: |
| if (flag == CRC_STOP_COMMAND) { |
| pbi_crc = pbi_crc ^ 0xFFFFFFFF; |
| } else { |
| pbi_crc = 0x00000000; |
| } |
| break; |
| case CHASSIS_UNKNOWN: |
| case CHASSIS_MAX: |
| printf("%s: Unknown Chassis.\n", __func__); |
| goto pbi_stop_err; |
| } |
| |
| if (fwrite(&pbi_crc, sizeof(pbi_crc), NUM_MEM_BLOCK, fp_rcw_pbi_op) |
| != NUM_MEM_BLOCK) { |
| printf("%s: Error in Writing PBI PBI CRC\n", __func__); |
| goto pbi_stop_err; |
| } |
| ret = SUCCESS; |
| |
| pbi_stop_err: |
| return ret; |
| } |
| |
| /* |
| * Returns: |
| * File size in bytes, on Success. |
| * FAILURE, on failure. |
| */ |
| int get_filesize(const char *c) |
| { |
| FILE *fp; |
| int ret = FAILURE; |
| |
| fp = fopen(c, "rb"); |
| if (fp == NULL) { |
| fprintf(stderr, "%s: Error in opening the file: %s\n", |
| __func__, c); |
| goto filesize_err; |
| } |
| |
| fseek(fp, 0L, SEEK_END); |
| ret = ftell(fp); |
| fclose(fp); |
| |
| filesize_err: |
| return ret; |
| } |
| |
| /*************************************************************************** |
| * Function : get_bootptr |
| * Arguments : fp_rcw_pbi_op - Pointer to output file |
| * Return : SUCCESS or FAILURE |
| * Description : Add bootptr pbi command to output file |
| ***************************************************************************/ |
| int add_boot_ptr_cmd(FILE *fp_rcw_pbi_op) |
| { |
| uint32_t bootptr_addr; |
| int ret = FAILURE; |
| |
| switch (pblimg.chassis) { |
| case CHASSIS_2: |
| if (sb_flag == true) |
| bootptr_addr = BYTE_SWAP_32(CSF_ADDR_SB); |
| else |
| bootptr_addr = BYTE_SWAP_32(BOOTPTR_ADDR); |
| pblimg.ep = BYTE_SWAP_32(pblimg.ep); |
| break; |
| case CHASSIS_3: |
| case CHASSIS_3_2: |
| if (sb_flag == true) |
| bootptr_addr = CSF_ADDR_SB_CH3; |
| else |
| bootptr_addr = BOOTPTR_ADDR_CH3; |
| break; |
| case CHASSIS_UNKNOWN: |
| case CHASSIS_MAX: |
| default: |
| printf("Internal Error: Invalid Chassis val = %d.\n", |
| pblimg.chassis); |
| goto bootptr_err; |
| } |
| |
| if (fwrite(&bootptr_addr, sizeof(bootptr_addr), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error in Writing PBI Words:[%d].\n", |
| __func__, ret); |
| goto bootptr_err; |
| } |
| |
| if (pblimg.ep != 0) { |
| if (fwrite(&pblimg.ep, sizeof(pblimg.ep), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error in Writing PBI Words\n", __func__); |
| goto bootptr_err; |
| } |
| } |
| |
| printf("\nBoot Location Pointer= 0x%x\n", |
| pblimg.chassis == CHASSIS_2 ? BYTE_SWAP_32(pblimg.ep) : |
| pblimg.ep); |
| ret = SUCCESS; |
| |
| bootptr_err: |
| return ret; |
| } |
| |
| /*************************************************************************** |
| * Function : add_blk_cpy_cmd |
| * Arguments : pbi_word - pointer to pbi commands |
| * args - Command line args flag. |
| * Return : SUCCESS or FAILURE |
| * Description : Add pbi commands for block copy cmd in pbi_words |
| ***************************************************************************/ |
| int add_blk_cpy_cmd(FILE *fp_rcw_pbi_op, uint16_t args) |
| { |
| uint32_t blk_cpy_hdr; |
| uint32_t file_size, new_file_size; |
| uint32_t align = 4; |
| int ret = FAILURE; |
| int num_pad_bytes = 0; |
| |
| if ((args & BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK) == 0) { |
| printf("ERROR: Offset not specified for Block Copy Cmd.\n"); |
| printf("\tSee Usage and use -f option\n"); |
| goto blk_copy_err; |
| } |
| |
| switch (pblimg.chassis) { |
| case CHASSIS_3: |
| /* Block copy command */ |
| blk_cpy_hdr = blk_cpy_hdr_map_ch3[pblimg.boot_src]; |
| pblimg.src_addr += base_addr_ch3[pblimg.boot_src]; |
| break; |
| case CHASSIS_3_2: |
| /* Block copy command */ |
| blk_cpy_hdr = blk_cpy_hdr_map_ch32[pblimg.boot_src]; |
| pblimg.src_addr += base_addr_ch32[pblimg.boot_src]; |
| break; |
| default: |
| printf("%s: Error invalid chassis type for this command.\n", |
| __func__); |
| goto blk_copy_err; |
| } |
| |
| file_size = get_filesize(pblimg.sec_imgnm); |
| if (file_size > 0) { |
| new_file_size = (file_size + (file_size % align)); |
| |
| /* Add Block copy command */ |
| if (fwrite(&blk_cpy_hdr, sizeof(blk_cpy_hdr), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error writing blk_cpy_hdr to the file.\n", |
| __func__); |
| goto blk_copy_err; |
| } |
| |
| if ((args & BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK) == 0) |
| num_pad_bytes = pblimg.src_addr % 4; |
| |
| /* Add Src address word */ |
| if (fwrite(&pblimg.src_addr + num_pad_bytes, |
| sizeof(pblimg.src_addr), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error writing BLK SRC Addr to the file.\n", |
| __func__); |
| goto blk_copy_err; |
| } |
| |
| /* Add Dest address word */ |
| if (fwrite(&pblimg.addr, sizeof(pblimg.addr), |
| NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error writing DST Addr to the file.\n", |
| __func__); |
| goto blk_copy_err; |
| } |
| |
| /* Add size */ |
| if (fwrite(&new_file_size, sizeof(new_file_size), |
| NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error writing size to the file.\n", |
| __func__); |
| goto blk_copy_err; |
| } |
| } |
| |
| ret = SUCCESS; |
| |
| blk_copy_err: |
| return ret; |
| } |
| |
| /*************************************************************************** |
| * Function : add_cpy_cmd |
| * Arguments : pbi_word - pointer to pbi commands |
| * Return : SUCCESS or FAILURE |
| * Description : Append pbi commands for copying BL2 image to the |
| * load address stored in pbl_image.addr |
| ***************************************************************************/ |
| int add_cpy_cmd(FILE *fp_rcw_pbi_op) |
| { |
| uint32_t ALTCBAR_ADDRESS = BYTE_SWAP_32(0x09570158); |
| uint32_t WAIT_CMD_WRITE_ADDRESS = BYTE_SWAP_32(0x096100c0); |
| uint32_t WAIT_CMD = BYTE_SWAP_32(0x000FFFFF); |
| int file_size; |
| uint32_t pbi_cmd, altcbar; |
| uint8_t pbi_data[MAX_PBI_DATA_LEN_BYTE]; |
| uint32_t dst_offset; |
| FILE *fp_img = NULL; |
| int ret = FAILURE; |
| |
| altcbar = pblimg.addr; |
| dst_offset = pblimg.addr; |
| fp_img = fopen(pblimg.sec_imgnm, "rb"); |
| if (fp_img == NULL) { |
| printf("%s: Error in opening the file: %s\n", __func__, |
| pblimg.sec_imgnm); |
| goto add_cpy_err; |
| } |
| file_size = get_filesize(pblimg.sec_imgnm); |
| altcbar = 0xfff00000 & altcbar; |
| altcbar = BYTE_SWAP_32(altcbar >> 16); |
| if (fwrite(&ALTCBAR_ADDRESS, sizeof(ALTCBAR_ADDRESS), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error in writing address of ALTCFG CMD.\n", |
| __func__); |
| goto add_cpy_err; |
| } |
| if (fwrite(&altcbar, sizeof(altcbar), NUM_MEM_BLOCK, fp_rcw_pbi_op) |
| != NUM_MEM_BLOCK) { |
| printf("%s: Error in writing ALTCFG CMD.\n", __func__); |
| goto add_cpy_err; |
| } |
| if (fwrite(&WAIT_CMD_WRITE_ADDRESS, sizeof(WAIT_CMD_WRITE_ADDRESS), |
| NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error in writing address of WAIT_CMD.\n", |
| __func__); |
| goto add_cpy_err; |
| } |
| if (fwrite(&WAIT_CMD, sizeof(WAIT_CMD), NUM_MEM_BLOCK, fp_rcw_pbi_op) |
| != NUM_MEM_BLOCK) { |
| printf("%s: Error in writing WAIT_CMD.\n", __func__); |
| goto add_cpy_err; |
| } |
| do { |
| memset(pbi_data, 0, MAX_PBI_DATA_LEN_BYTE); |
| |
| ret = fread(&pbi_data, MAX_PBI_DATA_LEN_BYTE, |
| NUM_MEM_BLOCK, fp_img); |
| if ((ret != NUM_MEM_BLOCK) && (!feof(fp_img))) { |
| printf("%s: Error writing ALTCFG Word: [%d].\n", |
| __func__, ret); |
| goto add_cpy_err; |
| } |
| |
| dst_offset &= OFFSET_MASK; |
| pbi_cmd = WRITE_CMD_BASE | dst_offset; |
| pbi_cmd = BYTE_SWAP_32(pbi_cmd); |
| if (fwrite(&pbi_cmd, sizeof(pbi_cmd), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error writing ALTCFG Word write cmd.\n", |
| __func__); |
| goto add_cpy_err; |
| } |
| if (fwrite(&pbi_data, MAX_PBI_DATA_LEN_BYTE, NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: Error writing ALTCFG_Word.\n", __func__); |
| goto add_cpy_err; |
| } |
| dst_offset += MAX_PBI_DATA_LEN_BYTE; |
| file_size -= MAX_PBI_DATA_LEN_BYTE; |
| } while (!feof(fp_img)); |
| |
| ret = SUCCESS; |
| |
| add_cpy_err: |
| if (fp_img != NULL) { |
| fclose(fp_img); |
| } |
| return ret; |
| } |
| |
| int main(int argc, char **argv) |
| { |
| FILE *file = NULL; |
| char *ptr; |
| int opt; |
| int tmp; |
| uint16_t args = ARG_INIT_MASK; |
| FILE *fp_rcw_pbi_ip = NULL, *fp_rcw_pbi_op = NULL; |
| uint32_t word, word_1; |
| int ret = FAILURE; |
| bool bootptr_flag = false; |
| enum stop_command flag_stop_cmd = CRC_STOP_COMMAND; |
| |
| /* Initializing the global structure to zero. */ |
| memset(&pblimg, 0x0, sizeof(struct pbl_image)); |
| |
| while ((opt = getopt(argc, argv, |
| ":b:f:r:i:e:d:c:o:h:s")) != -1) { |
| switch (opt) { |
| case 'd': |
| pblimg.addr = strtoull(optarg, &ptr, 16); |
| if (*ptr != 0) { |
| fprintf(stderr, "CMD Error: invalid load or destination address %s\n", optarg); |
| goto exit_main; |
| } |
| args |= BL2_BIN_CPY_DEST_ADDR_ARG_MASK; |
| break; |
| case 'r': |
| pblimg.rcw_nm = optarg; |
| file = fopen(pblimg.rcw_nm, "r"); |
| if (file == NULL) { |
| printf("CMD Error: Opening the RCW File.\n"); |
| goto exit_main; |
| } else { |
| args |= RCW_FILE_NAME_ARG_MASK; |
| fclose(file); |
| } |
| break; |
| case 'e': |
| bootptr_flag = true; |
| pblimg.ep = strtoull(optarg, &ptr, 16); |
| if (*ptr != 0) { |
| fprintf(stderr, |
| "CMD Error: Invalid entry point %s\n", optarg); |
| goto exit_main; |
| } |
| break; |
| case 'h': |
| print_usage(); |
| break; |
| case 'i': |
| pblimg.sec_imgnm = optarg; |
| file = fopen(pblimg.sec_imgnm, "r"); |
| if (file == NULL) { |
| printf("CMD Error: Opening Input file.\n"); |
| goto exit_main; |
| } else { |
| args |= IN_FILE_NAME_ARG_MASK; |
| fclose(file); |
| } |
| break; |
| case 'c': |
| tmp = atoi(optarg); |
| switch (tmp) { |
| case SOC_LS1012: |
| case SOC_LS1023: |
| case SOC_LS1026: |
| case SOC_LS1043: |
| case SOC_LS1046: |
| pblimg.chassis = CHASSIS_2; |
| break; |
| case SOC_LS1088: |
| case SOC_LS2080: |
| case SOC_LS2088: |
| pblimg.chassis = CHASSIS_3; |
| break; |
| case SOC_LS1028: |
| case SOC_LX2160: |
| pblimg.chassis = CHASSIS_3_2; |
| break; |
| default: |
| printf("CMD Error: Invalid SoC Val = %d.\n", tmp); |
| goto exit_main; |
| } |
| |
| args |= CHASSIS_ARG_MASK; |
| break; |
| case 'o': |
| pblimg.imagefile = optarg; |
| args |= OP_FILE_NAME_ARG_MASK; |
| break; |
| case 's': |
| sb_flag = true; |
| break; |
| case 'b': |
| if (strcmp(optarg, "qspi") == 0) { |
| pblimg.boot_src = QSPI_BOOT; |
| } else if (strcmp(optarg, "nor") == 0) { |
| pblimg.boot_src = IFC_NOR_BOOT; |
| } else if (strcmp(optarg, "nand") == 0) { |
| pblimg.boot_src = IFC_NAND_BOOT; |
| } else if (strcmp(optarg, "sd") == 0) { |
| pblimg.boot_src = SD_BOOT; |
| } else if (strcmp(optarg, "emmc") == 0) { |
| pblimg.boot_src = EMMC_BOOT; |
| } else if (strcmp(optarg, "flexspi_nor") == 0) { |
| pblimg.boot_src = FLXSPI_NOR_BOOT; |
| } else if (strcmp(optarg, "flexspi_nand") == 0) { |
| pblimg.boot_src = FLXSPI_NAND_BOOT; |
| } else if (strcmp(optarg, "flexspi_nand2k") == 0) { |
| pblimg.boot_src = FLXSPI_NAND4K_BOOT; |
| } else { |
| printf("CMD Error: Invalid boot source.\n"); |
| goto exit_main; |
| } |
| args |= BOOT_SRC_ARG_MASK; |
| break; |
| case 'f': |
| pblimg.src_addr = strtoull(optarg, &ptr, 16); |
| if (*ptr != 0) { |
| fprintf(stderr, |
| "CMD Error: Invalid src offset %s\n", optarg); |
| goto exit_main; |
| } |
| args |= BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK; |
| break; |
| default: |
| /* issue a warning and skip the unknown arg */ |
| printf("Cmd Warning: Invalid Arg = %c.\n", opt); |
| } |
| } |
| |
| if ((args & MAND_ARG_MASK) != MAND_ARG_MASK) { |
| print_usage(); |
| } |
| |
| fp_rcw_pbi_ip = fopen(pblimg.rcw_nm, "rb"); |
| if (fp_rcw_pbi_ip == NULL) { |
| printf("%s: Error in opening the rcw file: %s\n", |
| __func__, pblimg.rcw_nm); |
| goto exit_main; |
| } |
| |
| fp_rcw_pbi_op = fopen(pblimg.imagefile, "wb+"); |
| if (fp_rcw_pbi_op == NULL) { |
| printf("%s: Error opening the input file: %s\n", |
| __func__, pblimg.imagefile); |
| goto exit_main; |
| } |
| |
| printf("\nInput Boot Source: %s\n", boot_src_string[pblimg.boot_src]); |
| printf("Input RCW File: %s\n", pblimg.rcw_nm); |
| printf("Input BL2 Binary File: %s\n", pblimg.sec_imgnm); |
| printf("Input load address for BL2 Binary File: 0x%x\n", pblimg.addr); |
| |
| printf("Chassis Type: %d\n", pblimg.chassis); |
| switch (pblimg.chassis) { |
| case CHASSIS_2: |
| if (fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_ip) |
| != NUM_MEM_BLOCK) { |
| printf("%s: Error in reading word from the rcw file.\n", |
| __func__); |
| goto exit_main; |
| } |
| while (BYTE_SWAP_32(word) != 0x08610040) { |
| if (BYTE_SWAP_32(word) == 0x09550000 |
| || BYTE_SWAP_32(word) == 0x000f400c) { |
| break; |
| } |
| if (fwrite(&word, sizeof(word), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: [CH2] Error in Writing PBI Words\n", |
| __func__); |
| goto exit_main; |
| } |
| if (fread(&word, sizeof(word), NUM_MEM_BLOCK, |
| fp_rcw_pbi_ip) != NUM_MEM_BLOCK) { |
| printf("%s: [CH2] Error in Reading PBI Words\n", |
| __func__); |
| goto exit_main; |
| } |
| } |
| |
| if (bootptr_flag == true) { |
| /* Add command to set boot_loc ptr */ |
| ret = add_boot_ptr_cmd(fp_rcw_pbi_op); |
| if (ret != SUCCESS) { |
| goto exit_main; |
| } |
| } |
| |
| /* Write acs write commands to output file */ |
| ret = add_cpy_cmd(fp_rcw_pbi_op); |
| if (ret != SUCCESS) { |
| goto exit_main; |
| } |
| |
| /* Add stop command after adding pbi commands |
| * For Chasis 2.0 platforms it is always CRC & |
| * Stop command |
| */ |
| flag_stop_cmd = CRC_STOP_COMMAND; |
| ret = add_pbi_stop_cmd(fp_rcw_pbi_op, flag_stop_cmd); |
| if (ret != SUCCESS) { |
| goto exit_main; |
| } |
| |
| break; |
| |
| case CHASSIS_3: |
| case CHASSIS_3_2: |
| if (fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_ip) |
| != NUM_MEM_BLOCK) { |
| printf("%s: Error reading PBI Cmd.\n", __func__); |
| goto exit_main; |
| } |
| while (word != 0x808f0000 && word != 0x80ff0000) { |
| pbl_size++; |
| /* 11th words in RCW has PBL length. Update it |
| * with new length. 2 comamnds get added |
| * Block copy + CCSR Write/CSF header write |
| */ |
| if (pbl_size == 11) { |
| word_1 = (word & PBI_LEN_MASK) |
| + (PBI_LEN_ADD << 20); |
| word = word & ~PBI_LEN_MASK; |
| word = word | word_1; |
| } |
| /* Update the CRC command */ |
| /* Check load command.. |
| * add a check if command is Stop with CRC |
| * or stop without checksum |
| */ |
| if (pbl_size == 35) { |
| word = crypto_calculate_checksum(fp_rcw_pbi_op, |
| NUM_RCW_WORD - 1); |
| if (word == FAILURE) { |
| goto exit_main; |
| } |
| } |
| if (fwrite(&word, sizeof(word), NUM_MEM_BLOCK, |
| fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| printf("%s: [CH3] Error in Writing PBI Words\n", |
| __func__); |
| goto exit_main; |
| } |
| if (fread(&word, sizeof(word), NUM_MEM_BLOCK, |
| fp_rcw_pbi_ip) != NUM_MEM_BLOCK) { |
| printf("%s: [CH3] Error in Reading PBI Words\n", |
| __func__); |
| goto exit_main; |
| } |
| |
| if (word == CRC_STOP_CMD_ARM_CH3) { |
| flag_stop_cmd = CRC_STOP_COMMAND; |
| } else if (word == STOP_CMD_ARM_CH3) { |
| flag_stop_cmd = STOP_COMMAND; |
| } |
| } |
| if (bootptr_flag == true) { |
| /* Add command to set boot_loc ptr */ |
| ret = add_boot_ptr_cmd(fp_rcw_pbi_op); |
| if (ret != SUCCESS) { |
| printf("%s: add_boot_ptr_cmd return failure.\n", |
| __func__); |
| goto exit_main; |
| } |
| } |
| |
| /* Write acs write commands to output file */ |
| ret = add_blk_cpy_cmd(fp_rcw_pbi_op, args); |
| if (ret != SUCCESS) { |
| printf("%s: Function add_blk_cpy_cmd return failure.\n", |
| __func__); |
| goto exit_main; |
| } |
| |
| /* Add stop command after adding pbi commands */ |
| ret = add_pbi_stop_cmd(fp_rcw_pbi_op, flag_stop_cmd); |
| if (ret != SUCCESS) { |
| goto exit_main; |
| } |
| |
| break; |
| |
| default: |
| printf("%s: Unknown chassis type.\n", |
| __func__); |
| } |
| |
| if (ret == SUCCESS) { |
| printf("Output file successfully created with name: %s\n\n", |
| pblimg.imagefile); |
| } |
| |
| exit_main: |
| if (fp_rcw_pbi_op != NULL) { |
| fclose(fp_rcw_pbi_op); |
| } |
| if (fp_rcw_pbi_ip != NULL) { |
| fclose(fp_rcw_pbi_ip); |
| } |
| |
| return ret; |
| } |