make_helpers/defaults.mk - filogic/atf - Gitiles

 #
 # Copyright (c) 2016-2021, Arm Limited. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #

 # Default, static values for build variables, listed in alphabetic order.
 # Dependencies between build options, if any, are handled in the top-level
 # Makefile, after this file is included. This ensures that the former is better
 # poised to handle dependencies, as all build variables would have a default
 # value by then.

 # Use T32 by default
 AARCH32_INSTRUCTION_SET		:= T32

 # The AArch32 Secure Payload to be built as BL32 image
 AARCH32_SP			:= none

 # The Target build architecture. Supported values are: aarch64, aarch32.
 ARCH				:= aarch64

 # ARM Architecture feature modifiers: none by default
 ARM_ARCH_FEATURE		:= none

 # ARM Architecture major and minor versions: 8.0 by default.
 ARM_ARCH_MAJOR			:= 8
 ARM_ARCH_MINOR			:= 0

 # Base commit to perform code check on
 BASE_COMMIT			:= origin/master

 # Execute BL2 at EL3
 BL2_AT_EL3			:= 0

 # Only use SP packages if SP layout JSON is defined
 BL2_ENABLE_SP_LOAD		:= 0

 # BL2 image is stored in XIP memory, for now, this option is only supported
 # when BL2_AT_EL3 is 1.
 BL2_IN_XIP_MEM			:= 0

 # Do dcache invalidate upon BL2 entry at EL3
 BL2_INV_DCACHE			:= 1

 # Select the branch protection features to use.
 BRANCH_PROTECTION		:= 0

 # By default, consider that the platform may release several CPUs out of reset.
 # The platform Makefile is free to override this value.
 COLD_BOOT_SINGLE_CPU		:= 0

 # Flag to compile in coreboot support code. Exclude by default. The coreboot
 # Makefile system will set this when compiling TF as part of a coreboot image.
 COREBOOT			:= 0

 # For Chain of Trust
 CREATE_KEYS			:= 1

 # Build flag to include AArch32 registers in cpu context save and restore during
 # world switch. This flag must be set to 0 for AArch64-only platforms.
 CTX_INCLUDE_AARCH32_REGS	:= 1

 # Include FP registers in cpu context
 CTX_INCLUDE_FPREGS		:= 0

 # Include pointer authentication (ARMv8.3-PAuth) registers in cpu context. This
 # must be set to 1 if the platform wants to use this feature in the Secure
 # world. It is not needed to use it in the Non-secure world.
 CTX_INCLUDE_PAUTH_REGS		:= 0

 # Include Nested virtualization control (Armv8.4-NV) registers in cpu context.
 # This must be set to 1 if architecture implements Nested Virtualization
 # Extension and platform wants to use this feature in the Secure world
 CTX_INCLUDE_NEVE_REGS		:= 0

 # Debug build
 DEBUG				:= 0

 # By default disable authenticated decryption support.
 DECRYPTION_SUPPORT		:= none

 # Build platform
 DEFAULT_PLAT			:= fvp

 # Disable the generation of the binary image (ELF only).
 DISABLE_BIN_GENERATION		:= 0

 # Disable MTPMU if FEAT_MTPMU is supported. Default is 0 to keep backwards
 # compatibility.
 DISABLE_MTPMU			:= 0

 # Enable capability to disable authentication dynamically. Only meant for
 # development platforms.
 DYN_DISABLE_AUTH		:= 0

 # Build option to enable MPAM for lower ELs
 ENABLE_MPAM_FOR_LOWER_ELS	:= 0

 # Enable the Maximum Power Mitigation Mechanism on supporting cores.
 ENABLE_MPMM			:= 0

 # Enable MPMM configuration via FCONF.
 ENABLE_MPMM_FCONF		:= 0

 # Flag to Enable Position Independant support (PIE)
 ENABLE_PIE			:= 0

 # Flag to enable Performance Measurement Framework
 ENABLE_PMF			:= 0

 # Flag to enable PSCI STATs functionality
 ENABLE_PSCI_STAT		:= 0

 # Flag to enable Realm Management Extension (FEAT_RME)
 ENABLE_RME			:= 0

 # Flag to enable runtime instrumentation using PMF
 ENABLE_RUNTIME_INSTRUMENTATION	:= 0

 # Flag to enable stack corruption protection
 ENABLE_STACK_PROTECTOR		:= 0

 # Flag to enable exception handling in EL3
 EL3_EXCEPTION_HANDLING		:= 0

 # Flag to enable Branch Target Identification.
 # Internal flag not meant for direct setting.
 # Use BRANCH_PROTECTION to enable BTI.
 ENABLE_BTI			:= 0

 # Flag to enable Pointer Authentication.
 # Internal flag not meant for direct setting.
 # Use BRANCH_PROTECTION to enable PAUTH.
 ENABLE_PAUTH			:= 0

 # Flag to enable access to the HCRX_EL2 register by setting SCR_EL3.HXEn.
 ENABLE_FEAT_HCX			:= 0

 # Flag to enable access to the HAFGRTR_EL2 register
 ENABLE_FEAT_AMUv1		:= 0

 # By default BL31 encryption disabled
 ENCRYPT_BL31			:= 0

 # By default BL32 encryption disabled
 ENCRYPT_BL32			:= 0

 # Default dummy firmware encryption key
 ENC_KEY	:= 1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef

 # Default dummy nonce for firmware encryption
 ENC_NONCE			:= 1234567890abcdef12345678

 # Build flag to treat usage of deprecated platform and framework APIs as error.
 ERROR_DEPRECATED		:= 0

 # Fault injection support
 FAULT_INJECTION_SUPPORT		:= 0

 # Byte alignment that each component in FIP is aligned to
 FIP_ALIGN			:= 0

 # Default FIP file name
 FIP_NAME			:= fip.bin

 # Default FWU_FIP file name
 FWU_FIP_NAME			:= fwu_fip.bin

 # By default firmware encryption with SSK
 FW_ENC_STATUS			:= 0

 # For Chain of Trust
 GENERATE_COT			:= 0

 # Hint platform interrupt control layer that Group 0 interrupts are for EL3. By
 # default, they are for Secure EL1.
 GICV2_G0_FOR_EL3		:= 0

 # Route External Aborts to EL3. Disabled by default; External Aborts are handled
 # by lower ELs.
 HANDLE_EA_EL3_FIRST		:= 0

 # Secure hash algorithm flag, accepts 3 values: sha256, sha384 and sha512.
 # The default value is sha256.
 HASH_ALG			:= sha256

 # Whether system coherency is managed in hardware, without explicit software
 # operations.
 HW_ASSISTED_COHERENCY		:= 0

 # Set the default algorithm for the generation of Trusted Board Boot keys
 KEY_ALG				:= rsa

 # Set the default key size in case KEY_ALG is rsa
 ifeq ($(KEY_ALG),rsa)
 KEY_SIZE			:= 2048
 endif

 # Option to build TF with Measured Boot support
 MEASURED_BOOT			:= 0

 # NS timer register save and restore
 NS_TIMER_SWITCH			:= 0

 # Include lib/libc in the final image
 OVERRIDE_LIBC			:= 0

 # Build PL011 UART driver in minimal generic UART mode
 PL011_GENERIC_UART		:= 0

 # By default, consider that the platform's reset address is not programmable.
 # The platform Makefile is free to override this value.
 PROGRAMMABLE_RESET_ADDRESS	:= 0

 # Flag used to choose the power state format: Extended State-ID or Original
 PSCI_EXTENDED_STATE_ID		:= 0

 # Enable RAS support
 RAS_EXTENSION			:= 0

 # By default, BL1 acts as the reset handler, not BL31
 RESET_TO_BL31			:= 0

 # For Chain of Trust
 SAVE_KEYS			:= 0

 # Software Delegated Exception support
 SDEI_SUPPORT			:= 0

 # True Random Number firmware Interface
 TRNG_SUPPORT			:= 0

 # SMCCC PCI support
 SMC_PCI_SUPPORT			:= 0

 # Whether code and read-only data should be put on separate memory pages. The
 # platform Makefile is free to override this value.
 SEPARATE_CODE_AND_RODATA	:= 0

 # Put NOBITS sections (.bss, stacks, page tables, and coherent memory) in a
 # separate memory region, which may be discontiguous from the rest of BL31.
 SEPARATE_NOBITS_REGION		:= 0

 # If the BL31 image initialisation code is recalimed after use for the secondary
 # cores stack
 RECLAIM_INIT_CODE		:= 0

 # SPD choice
 SPD				:= none

 # Enable the Management Mode (MM)-based Secure Partition Manager implementation
 SPM_MM				:= 0

 # Use SPM at S-EL2 as a default config for SPMD
 SPMD_SPM_AT_SEL2		:= 1

 # Flag to introduce an infinite loop in BL1 just before it exits into the next
 # image. This is meant to help debugging the post-BL2 phase.
 SPIN_ON_BL1_EXIT		:= 0

 # Flags to build TF with Trusted Boot support
 TRUSTED_BOARD_BOOT		:= 0

 # Build option to choose whether Trusted Firmware uses Coherent memory or not.
 USE_COHERENT_MEM		:= 1

 # Build option to add debugfs support
 USE_DEBUGFS			:= 0

 # Build option to fconf based io
 ARM_IO_IN_DTB			:= 0

 # Build option to support SDEI through fconf
 SDEI_IN_FCONF			:= 0

 # Build option to support Secure Interrupt descriptors through fconf
 SEC_INT_DESC_IN_FCONF		:= 0

 # Build option to choose whether Trusted Firmware uses library at ROM
 USE_ROMLIB			:= 0

 # Build option to choose whether the xlat tables of BL images can be read-only.
 # Note that this only serves as a higher level option to PLAT_RO_XLAT_TABLES,
 # which is the per BL-image option that actually enables the read-only tables
 # API. The reason for having this additional option is to have a common high
 # level makefile where we can check for incompatible features/build options.
 ALLOW_RO_XLAT_TABLES		:= 0

 # Chain of trust.
 COT				:= tbbr

 # Use tbbr_oid.h instead of platform_oid.h
 USE_TBBR_DEFS			:= 1

 # Build verbosity
 V				:= 0

 # Whether to enable D-Cache early during warm boot. This is usually
 # applicable for platforms wherein interconnect programming is not
 # required to enable cache coherency after warm reset (eg: single cluster
 # platforms).
 WARMBOOT_ENABLE_DCACHE_EARLY	:= 0

 # Build option to enable/disable the Statistical Profiling Extensions
 ENABLE_SPE_FOR_LOWER_ELS	:= 1

 # SPE is only supported on AArch64 so disable it on AArch32.
 ifeq (${ARCH},aarch32)
 	override ENABLE_SPE_FOR_LOWER_ELS := 0
 endif

 # Include Memory Tagging Extension registers in cpu context. This must be set
 # to 1 if the platform wants to use this feature in the Secure world and MTE is
 # enabled at ELX.
 CTX_INCLUDE_MTE_REGS		:= 0

 ENABLE_AMU			:= 0
 ENABLE_AMU_AUXILIARY_COUNTERS	:= 0
 ENABLE_AMU_FCONF		:= 0
 AMU_RESTRICT_COUNTERS		:= 0

 # Enable SVE for non-secure world by default
 ENABLE_SVE_FOR_NS		:= 1
 ENABLE_SVE_FOR_SWD		:= 0

 # SME defaults to disabled
 ENABLE_SME_FOR_NS		:= 0
 ENABLE_SME_FOR_SWD		:= 0

 # If SME is enabled then force SVE off
 ifeq (${ENABLE_SME_FOR_NS},1)
 	override ENABLE_SVE_FOR_NS	:= 0
 	override ENABLE_SVE_FOR_SWD	:= 0
 endif

 SANITIZE_UB := off

 # For ARMv8.1 (AArch64) platforms, enabling this option selects the spinlock
 # implementation variant using the ARMv8.1-LSE compare-and-swap instruction.
 # Default: disabled
 USE_SPINLOCK_CAS := 0

 # Enable Link Time Optimization
 ENABLE_LTO			:= 0

 # Build flag to include EL2 registers in cpu context save and restore during
 # S-EL2 firmware entry/exit. This flag is to be used with SPD=spmd option.
 # Default is 0.
 CTX_INCLUDE_EL2_REGS		:= 0

 # Enable Memory tag extension which is supported for architecture greater
 # than Armv8.5-A
 # By default it is set to "no"
 SUPPORT_STACK_MEMTAG		:= no

 # Select workaround for AT speculative behaviour.
 ERRATA_SPECULATIVE_AT		:= 0

 # Trap RAS error record access from lower EL
 RAS_TRAP_LOWER_EL_ERR_ACCESS	:= 0

 # Build option to create cot descriptors using fconf
 COT_DESC_IN_DTB			:= 0

 # Build option to provide openssl directory path
 OPENSSL_DIR			:= /usr

 # Build option to use the SP804 timer instead of the generic one
 USE_SP804_TIMER			:= 0

 # Build option to define number of firmware banks, used in firmware update
 # metadata structure.
 NR_OF_FW_BANKS			:= 2

 # Build option to define number of images in firmware bank, used in firmware
 # update metadata structure.
 NR_OF_IMAGES_IN_FW_BANK		:= 1

 # Disable Firmware update support by default
 PSA_FWU_SUPPORT			:= 0

 # By default, disable access of trace buffer control registers from NS
 # lower ELs  i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused
 # if FEAT_TRBE is implemented.
 # Note FEAT_TRBE is only supported on AArch64 - therefore do not enable in
 # AArch32.
 ifneq (${ARCH},aarch32)
 	ENABLE_TRBE_FOR_NS		:= 0
 else
 	override ENABLE_TRBE_FOR_NS	:= 0
 endif

 # By default, disable access of trace system registers from NS lower
 # ELs  i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused if
 # system register trace is implemented.
 ENABLE_SYS_REG_TRACE_FOR_NS	:= 0

 # By default, disable trace filter control registers access to NS
 # lower ELs, i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused
 # if FEAT_TRF is implemented.
 ENABLE_TRF_FOR_NS		:= 0
	#
	# Copyright (c) 2016-2021, Arm Limited. All rights reserved.
	#
	# SPDX-License-Identifier: BSD-3-Clause
	#

	# Default, static values for build variables, listed in alphabetic order.
	# Dependencies between build options, if any, are handled in the top-level
	# Makefile, after this file is included. This ensures that the former is better
	# poised to handle dependencies, as all build variables would have a default
	# value by then.

	# Use T32 by default
	AARCH32_INSTRUCTION_SET := T32

	# The AArch32 Secure Payload to be built as BL32 image
	AARCH32_SP := none

	# The Target build architecture. Supported values are: aarch64, aarch32.
	ARCH := aarch64

	# ARM Architecture feature modifiers: none by default
	ARM_ARCH_FEATURE := none

	# ARM Architecture major and minor versions: 8.0 by default.
	ARM_ARCH_MAJOR := 8
	ARM_ARCH_MINOR := 0

	# Base commit to perform code check on
	BASE_COMMIT := origin/master

	# Execute BL2 at EL3
	BL2_AT_EL3 := 0

	# Only use SP packages if SP layout JSON is defined
	BL2_ENABLE_SP_LOAD := 0

	# BL2 image is stored in XIP memory, for now, this option is only supported
	# when BL2_AT_EL3 is 1.
	BL2_IN_XIP_MEM := 0

	# Do dcache invalidate upon BL2 entry at EL3
	BL2_INV_DCACHE := 1

	# Select the branch protection features to use.
	BRANCH_PROTECTION := 0

	# By default, consider that the platform may release several CPUs out of reset.
	# The platform Makefile is free to override this value.
	COLD_BOOT_SINGLE_CPU := 0

	# Flag to compile in coreboot support code. Exclude by default. The coreboot
	# Makefile system will set this when compiling TF as part of a coreboot image.
	COREBOOT := 0

	# For Chain of Trust
	CREATE_KEYS := 1

	# Build flag to include AArch32 registers in cpu context save and restore during
	# world switch. This flag must be set to 0 for AArch64-only platforms.
	CTX_INCLUDE_AARCH32_REGS := 1

	# Include FP registers in cpu context
	CTX_INCLUDE_FPREGS := 0

	# Include pointer authentication (ARMv8.3-PAuth) registers in cpu context. This
	# must be set to 1 if the platform wants to use this feature in the Secure
	# world. It is not needed to use it in the Non-secure world.
	CTX_INCLUDE_PAUTH_REGS := 0

	# Include Nested virtualization control (Armv8.4-NV) registers in cpu context.
	# This must be set to 1 if architecture implements Nested Virtualization
	# Extension and platform wants to use this feature in the Secure world
	CTX_INCLUDE_NEVE_REGS := 0

	# Debug build
	DEBUG := 0

	# By default disable authenticated decryption support.
	DECRYPTION_SUPPORT := none

	# Build platform
	DEFAULT_PLAT := fvp

	# Disable the generation of the binary image (ELF only).
	DISABLE_BIN_GENERATION := 0

	# Disable MTPMU if FEAT_MTPMU is supported. Default is 0 to keep backwards
	# compatibility.
	DISABLE_MTPMU := 0

	# Enable capability to disable authentication dynamically. Only meant for
	# development platforms.
	DYN_DISABLE_AUTH := 0

	# Build option to enable MPAM for lower ELs
	ENABLE_MPAM_FOR_LOWER_ELS := 0

	# Enable the Maximum Power Mitigation Mechanism on supporting cores.
	ENABLE_MPMM := 0

	# Enable MPMM configuration via FCONF.
	ENABLE_MPMM_FCONF := 0

	# Flag to Enable Position Independant support (PIE)
	ENABLE_PIE := 0

	# Flag to enable Performance Measurement Framework
	ENABLE_PMF := 0

	# Flag to enable PSCI STATs functionality
	ENABLE_PSCI_STAT := 0

	# Flag to enable Realm Management Extension (FEAT_RME)
	ENABLE_RME := 0

	# Flag to enable runtime instrumentation using PMF
	ENABLE_RUNTIME_INSTRUMENTATION := 0

	# Flag to enable stack corruption protection
	ENABLE_STACK_PROTECTOR := 0

	# Flag to enable exception handling in EL3
	EL3_EXCEPTION_HANDLING := 0

	# Flag to enable Branch Target Identification.
	# Internal flag not meant for direct setting.
	# Use BRANCH_PROTECTION to enable BTI.
	ENABLE_BTI := 0

	# Flag to enable Pointer Authentication.
	# Internal flag not meant for direct setting.
	# Use BRANCH_PROTECTION to enable PAUTH.
	ENABLE_PAUTH := 0

	# Flag to enable access to the HCRX_EL2 register by setting SCR_EL3.HXEn.
	ENABLE_FEAT_HCX := 0

	# Flag to enable access to the HAFGRTR_EL2 register
	ENABLE_FEAT_AMUv1 := 0

	# By default BL31 encryption disabled
	ENCRYPT_BL31 := 0

	# By default BL32 encryption disabled
	ENCRYPT_BL32 := 0

	# Default dummy firmware encryption key
	ENC_KEY := 1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef

	# Default dummy nonce for firmware encryption
	ENC_NONCE := 1234567890abcdef12345678

	# Build flag to treat usage of deprecated platform and framework APIs as error.
	ERROR_DEPRECATED := 0

	# Fault injection support
	FAULT_INJECTION_SUPPORT := 0

	# Byte alignment that each component in FIP is aligned to
	FIP_ALIGN := 0

	# Default FIP file name
	FIP_NAME := fip.bin

	# Default FWU_FIP file name
	FWU_FIP_NAME := fwu_fip.bin

	# By default firmware encryption with SSK
	FW_ENC_STATUS := 0

	# For Chain of Trust
	GENERATE_COT := 0

	# Hint platform interrupt control layer that Group 0 interrupts are for EL3. By
	# default, they are for Secure EL1.
	GICV2_G0_FOR_EL3 := 0

	# Route External Aborts to EL3. Disabled by default; External Aborts are handled
	# by lower ELs.
	HANDLE_EA_EL3_FIRST := 0

	# Secure hash algorithm flag, accepts 3 values: sha256, sha384 and sha512.
	# The default value is sha256.
	HASH_ALG := sha256

	# Whether system coherency is managed in hardware, without explicit software
	# operations.
	HW_ASSISTED_COHERENCY := 0

	# Set the default algorithm for the generation of Trusted Board Boot keys
	KEY_ALG := rsa

	# Set the default key size in case KEY_ALG is rsa
	ifeq ($(KEY_ALG),rsa)
	KEY_SIZE := 2048
	endif

	# Option to build TF with Measured Boot support
	MEASURED_BOOT := 0

	# NS timer register save and restore
	NS_TIMER_SWITCH := 0

	# Include lib/libc in the final image
	OVERRIDE_LIBC := 0

	# Build PL011 UART driver in minimal generic UART mode
	PL011_GENERIC_UART := 0

	# By default, consider that the platform's reset address is not programmable.
	# The platform Makefile is free to override this value.
	PROGRAMMABLE_RESET_ADDRESS := 0

	# Flag used to choose the power state format: Extended State-ID or Original
	PSCI_EXTENDED_STATE_ID := 0

	# Enable RAS support
	RAS_EXTENSION := 0

	# By default, BL1 acts as the reset handler, not BL31
	RESET_TO_BL31 := 0

	# For Chain of Trust
	SAVE_KEYS := 0

	# Software Delegated Exception support
	SDEI_SUPPORT := 0

	# True Random Number firmware Interface
	TRNG_SUPPORT := 0

	# SMCCC PCI support
	SMC_PCI_SUPPORT := 0

	# Whether code and read-only data should be put on separate memory pages. The
	# platform Makefile is free to override this value.
	SEPARATE_CODE_AND_RODATA := 0

	# Put NOBITS sections (.bss, stacks, page tables, and coherent memory) in a
	# separate memory region, which may be discontiguous from the rest of BL31.
	SEPARATE_NOBITS_REGION := 0

	# If the BL31 image initialisation code is recalimed after use for the secondary
	# cores stack
	RECLAIM_INIT_CODE := 0

	# SPD choice
	SPD := none

	# Enable the Management Mode (MM)-based Secure Partition Manager implementation
	SPM_MM := 0

	# Use SPM at S-EL2 as a default config for SPMD
	SPMD_SPM_AT_SEL2 := 1

	# Flag to introduce an infinite loop in BL1 just before it exits into the next
	# image. This is meant to help debugging the post-BL2 phase.
	SPIN_ON_BL1_EXIT := 0

	# Flags to build TF with Trusted Boot support
	TRUSTED_BOARD_BOOT := 0

	# Build option to choose whether Trusted Firmware uses Coherent memory or not.
	USE_COHERENT_MEM := 1

	# Build option to add debugfs support
	USE_DEBUGFS := 0

	# Build option to fconf based io
	ARM_IO_IN_DTB := 0

	# Build option to support SDEI through fconf
	SDEI_IN_FCONF := 0

	# Build option to support Secure Interrupt descriptors through fconf
	SEC_INT_DESC_IN_FCONF := 0

	# Build option to choose whether Trusted Firmware uses library at ROM
	USE_ROMLIB := 0

	# Build option to choose whether the xlat tables of BL images can be read-only.
	# Note that this only serves as a higher level option to PLAT_RO_XLAT_TABLES,
	# which is the per BL-image option that actually enables the read-only tables
	# API. The reason for having this additional option is to have a common high
	# level makefile where we can check for incompatible features/build options.
	ALLOW_RO_XLAT_TABLES := 0

	# Chain of trust.
	COT := tbbr

	# Use tbbr_oid.h instead of platform_oid.h
	USE_TBBR_DEFS := 1

	# Build verbosity
	V := 0

	# Whether to enable D-Cache early during warm boot. This is usually
	# applicable for platforms wherein interconnect programming is not
	# required to enable cache coherency after warm reset (eg: single cluster
	# platforms).
	WARMBOOT_ENABLE_DCACHE_EARLY := 0

	# Build option to enable/disable the Statistical Profiling Extensions
	ENABLE_SPE_FOR_LOWER_ELS := 1

	# SPE is only supported on AArch64 so disable it on AArch32.
	ifeq (${ARCH},aarch32)
	override ENABLE_SPE_FOR_LOWER_ELS := 0
	endif

	# Include Memory Tagging Extension registers in cpu context. This must be set
	# to 1 if the platform wants to use this feature in the Secure world and MTE is
	# enabled at ELX.
	CTX_INCLUDE_MTE_REGS := 0

	ENABLE_AMU := 0
	ENABLE_AMU_AUXILIARY_COUNTERS := 0
	ENABLE_AMU_FCONF := 0
	AMU_RESTRICT_COUNTERS := 0

	# Enable SVE for non-secure world by default
	ENABLE_SVE_FOR_NS := 1
	ENABLE_SVE_FOR_SWD := 0

	# SME defaults to disabled
	ENABLE_SME_FOR_NS := 0
	ENABLE_SME_FOR_SWD := 0

	# If SME is enabled then force SVE off
	ifeq (${ENABLE_SME_FOR_NS},1)
	override ENABLE_SVE_FOR_NS := 0
	override ENABLE_SVE_FOR_SWD := 0
	endif

	SANITIZE_UB := off

	# For ARMv8.1 (AArch64) platforms, enabling this option selects the spinlock
	# implementation variant using the ARMv8.1-LSE compare-and-swap instruction.
	# Default: disabled
	USE_SPINLOCK_CAS := 0

	# Enable Link Time Optimization
	ENABLE_LTO := 0

	# Build flag to include EL2 registers in cpu context save and restore during
	# S-EL2 firmware entry/exit. This flag is to be used with SPD=spmd option.
	# Default is 0.
	CTX_INCLUDE_EL2_REGS := 0

	# Enable Memory tag extension which is supported for architecture greater
	# than Armv8.5-A
	# By default it is set to "no"
	SUPPORT_STACK_MEMTAG := no

	# Select workaround for AT speculative behaviour.
	ERRATA_SPECULATIVE_AT := 0

	# Trap RAS error record access from lower EL
	RAS_TRAP_LOWER_EL_ERR_ACCESS := 0

	# Build option to create cot descriptors using fconf
	COT_DESC_IN_DTB := 0

	# Build option to provide openssl directory path
	OPENSSL_DIR := /usr

	# Build option to use the SP804 timer instead of the generic one
	USE_SP804_TIMER := 0

	# Build option to define number of firmware banks, used in firmware update
	# metadata structure.
	NR_OF_FW_BANKS := 2

	# Build option to define number of images in firmware bank, used in firmware
	# update metadata structure.
	NR_OF_IMAGES_IN_FW_BANK := 1

	# Disable Firmware update support by default
	PSA_FWU_SUPPORT := 0

	# By default, disable access of trace buffer control registers from NS
	# lower ELs i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused
	# if FEAT_TRBE is implemented.
	# Note FEAT_TRBE is only supported on AArch64 - therefore do not enable in
	# AArch32.
	ifneq (${ARCH},aarch32)
	ENABLE_TRBE_FOR_NS := 0
	else
	override ENABLE_TRBE_FOR_NS := 0
	endif

	# By default, disable access of trace system registers from NS lower
	# ELs i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused if
	# system register trace is implemented.
	ENABLE_SYS_REG_TRACE_FOR_NS := 0

	# By default, disable trace filter control registers access to NS
	# lower ELs, i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused
	# if FEAT_TRF is implemented.
	ENABLE_TRF_FOR_NS := 0