include/drivers/arm/tzc400.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __TZC400_H__
 #define __TZC400_H__


 #define BUILD_CONFIG_OFF	0x000
 #define ACTION_OFF		0x004
 #define GATE_KEEPER_OFF		0x008
 #define SPECULATION_CTRL_OFF	0x00c
 #define INT_STATUS		0x010
 #define INT_CLEAR		0x014

 #define FAIL_ADDRESS_LOW_OFF	0x020
 #define FAIL_ADDRESS_HIGH_OFF	0x024
 #define FAIL_CONTROL_OFF	0x028
 #define FAIL_ID			0x02c

 #define REGION_BASE_LOW_OFF	0x100
 #define REGION_BASE_HIGH_OFF	0x104
 #define REGION_TOP_LOW_OFF	0x108
 #define REGION_TOP_HIGH_OFF	0x10c
 #define REGION_ATTRIBUTES_OFF	0x110
 #define REGION_ID_ACCESS_OFF	0x114
 #define REGION_NUM_OFF(region)  (0x20 * region)

 /* ID Registers */
 #define PID0_OFF		0xfe0
 #define PID1_OFF		0xfe4
 #define PID2_OFF		0xfe8
 #define PID3_OFF		0xfec
 #define PID4_OFF		0xfd0
 #define PID5_OFF		0xfd4
 #define PID6_OFF		0xfd8
 #define PID7_OFF		0xfdc
 #define CID0_OFF		0xff0
 #define CID1_OFF		0xff4
 #define CID2_OFF		0xff8
 #define CID3_OFF		0xffc

 #define BUILD_CONFIG_NF_SHIFT	24
 #define BUILD_CONFIG_NF_MASK	0x3
 #define BUILD_CONFIG_AW_SHIFT	8
 #define BUILD_CONFIG_AW_MASK	0x3f
 #define BUILD_CONFIG_NR_SHIFT	0
 #define BUILD_CONFIG_NR_MASK	0x1f

 /* Not describing the case where regions 1 to 8 overlap */
 #define ACTION_RV_SHIFT		0
 #define ACTION_RV_MASK		0x3
 #define  ACTION_RV_LOWOK	0x0
 #define  ACTION_RV_LOWERR	0x1
 #define  ACTION_RV_HIGHOK	0x2
 #define  ACTION_RV_HIGHERR	0x3

 /*
  * Number of gate keepers is implementation defined. But we know the max for
  * this device is 4. Get implementation details from BUILD_CONFIG.
  */
 #define GATE_KEEPER_OS_SHIFT	16
 #define GATE_KEEPER_OS_MASK	0xf
 #define GATE_KEEPER_OR_SHIFT	0
 #define GATE_KEEPER_OR_MASK	0xf
 #define GATE_KEEPER_FILTER_MASK	0x1

 /* Speculation is enabled by default. */
 #define SPECULATION_CTRL_WRITE_DISABLE	(1 << 1)
 #define SPECULATION_CTRL_READ_DISABLE	(1 << 0)

 /* Max number of filters allowed is 4. */
 #define INT_STATUS_OVERLAP_SHIFT	16
 #define INT_STATUS_OVERLAP_MASK		0xf
 #define INT_STATUS_OVERRUN_SHIFT	8
 #define INT_STATUS_OVERRUN_MASK		0xf
 #define INT_STATUS_STATUS_SHIFT		0
 #define INT_STATUS_STATUS_MASK		0xf

 #define INT_CLEAR_CLEAR_SHIFT		0
 #define INT_CLEAR_CLEAR_MASK		0xf

 #define FAIL_CONTROL_DIR_SHIFT		(1 << 24)
 #define  FAIL_CONTROL_DIR_READ		0x0
 #define  FAIL_CONTROL_DIR_WRITE		0x1
 #define FAIL_CONTROL_NS_SHIFT		(1 << 21)
 #define  FAIL_CONTROL_NS_SECURE		0x0
 #define  FAIL_CONTROL_NS_NONSECURE	0x1
 #define FAIL_CONTROL_PRIV_SHIFT		(1 << 20)
 #define  FAIL_CONTROL_PRIV_PRIV		0x0
 #define  FAIL_CONTROL_PRIV_UNPRIV	0x1

 /*
  * FAIL_ID_ID_MASK depends on AID_WIDTH which is platform specific.
  * Platform should provide the value on initialisation.
  */
 #define FAIL_ID_VNET_SHIFT		24
 #define FAIL_ID_VNET_MASK		0xf
 #define FAIL_ID_ID_SHIFT		0

 /* Used along with 'tzc_region_attributes_t' below */
 #define REG_ATTR_SEC_SHIFT		30
 #define REG_ATTR_F_EN_SHIFT		0
 #define REG_ATTR_F_EN_MASK		0xf
 #define REG_ATTR_FILTER_BIT(x)		((1 << x) << REG_ATTR_F_EN_SHIFT)
 #define REG_ATTR_FILTER_BIT_ALL		(REG_ATTR_F_EN_MASK << \
 					REG_ATTR_F_EN_SHIFT)

 #define REGION_ID_ACCESS_NSAID_WR_EN_SHIFT	16
 #define REGION_ID_ACCESS_NSAID_RD_EN_SHIFT	0
 #define REGION_ID_ACCESS_NSAID_ID_MASK		0xf


 /* Macros for setting Region ID access permissions based on NSAID */
 #define TZC_REGION_ACCESS_RD(id)					\
 		((1 << (id & REGION_ID_ACCESS_NSAID_ID_MASK)) <<	\
 		 REGION_ID_ACCESS_NSAID_RD_EN_SHIFT)
 #define TZC_REGION_ACCESS_WR(id)					\
 		((1 << (id & REGION_ID_ACCESS_NSAID_ID_MASK)) <<	\
 		 REGION_ID_ACCESS_NSAID_WR_EN_SHIFT)
 #define TZC_REGION_ACCESS_RDWR(id)					\
 		(TZC_REGION_ACCESS_RD(id) | TZC_REGION_ACCESS_WR(id))

 #define TZC400_COMPONENT_ID	0xb105f00d


 #ifndef __ASSEMBLY__

 #include <stdint.h>

 /*******************************************************************************
  * Function & variable prototypes
  ******************************************************************************/

 /*
  * What type of action is expected when an access violation occurs.
  * The memory requested is zeroed. But we can also raise and event to
  * let the system know it happened.
  * We can raise an interrupt(INT) and/or cause an exception(ERR).
  *  TZC_ACTION_NONE    - No interrupt, no Exception
  *  TZC_ACTION_ERR     - No interrupt, raise exception -> sync external
  *                       data abort
  *  TZC_ACTION_INT     - Raise interrupt, no exception
  *  TZC_ACTION_ERR_INT - Raise interrupt, raise exception -> sync
  *                       external data abort
  */
 typedef enum {
 	TZC_ACTION_NONE = 0,
 	TZC_ACTION_ERR = 1,
 	TZC_ACTION_INT = 2,
 	TZC_ACTION_ERR_INT = (TZC_ACTION_ERR | TZC_ACTION_INT)
 } tzc_action_t;

 /*
  * Controls secure access to a region. If not enabled secure access is not
  * allowed to region.
  */
 typedef enum {
 	TZC_REGION_S_NONE = 0,
 	TZC_REGION_S_RD = 1,
 	TZC_REGION_S_WR = 2,
 	TZC_REGION_S_RDWR = (TZC_REGION_S_RD | TZC_REGION_S_WR)
 } tzc_region_attributes_t;


 void tzc_init(uintptr_t base);
 void tzc_configure_region0(tzc_region_attributes_t sec_attr,
 			uint32_t ns_device_access);
 void tzc_configure_region(uint32_t filters,
 			uint8_t region,
 			uint64_t region_base,
 			uint64_t region_top,
 			tzc_region_attributes_t sec_attr,
 			uint32_t ns_device_access);
 void tzc_enable_filters(void);
 void tzc_disable_filters(void);
 void tzc_set_action(tzc_action_t action);

 #endif /* __ASSEMBLY__ */

 #endif /* __TZC400__ */
	/*
	* Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __TZC400_H__
	#define __TZC400_H__


	#define BUILD_CONFIG_OFF 0x000
	#define ACTION_OFF 0x004
	#define GATE_KEEPER_OFF 0x008
	#define SPECULATION_CTRL_OFF 0x00c
	#define INT_STATUS 0x010
	#define INT_CLEAR 0x014

	#define FAIL_ADDRESS_LOW_OFF 0x020
	#define FAIL_ADDRESS_HIGH_OFF 0x024
	#define FAIL_CONTROL_OFF 0x028
	#define FAIL_ID 0x02c

	#define REGION_BASE_LOW_OFF 0x100
	#define REGION_BASE_HIGH_OFF 0x104
	#define REGION_TOP_LOW_OFF 0x108
	#define REGION_TOP_HIGH_OFF 0x10c
	#define REGION_ATTRIBUTES_OFF 0x110
	#define REGION_ID_ACCESS_OFF 0x114
	#define REGION_NUM_OFF(region) (0x20 * region)

	/* ID Registers */
	#define PID0_OFF 0xfe0
	#define PID1_OFF 0xfe4
	#define PID2_OFF 0xfe8
	#define PID3_OFF 0xfec
	#define PID4_OFF 0xfd0
	#define PID5_OFF 0xfd4
	#define PID6_OFF 0xfd8
	#define PID7_OFF 0xfdc
	#define CID0_OFF 0xff0
	#define CID1_OFF 0xff4
	#define CID2_OFF 0xff8
	#define CID3_OFF 0xffc

	#define BUILD_CONFIG_NF_SHIFT 24
	#define BUILD_CONFIG_NF_MASK 0x3
	#define BUILD_CONFIG_AW_SHIFT 8
	#define BUILD_CONFIG_AW_MASK 0x3f
	#define BUILD_CONFIG_NR_SHIFT 0
	#define BUILD_CONFIG_NR_MASK 0x1f

	/* Not describing the case where regions 1 to 8 overlap */
	#define ACTION_RV_SHIFT 0
	#define ACTION_RV_MASK 0x3
	#define ACTION_RV_LOWOK 0x0
	#define ACTION_RV_LOWERR 0x1
	#define ACTION_RV_HIGHOK 0x2
	#define ACTION_RV_HIGHERR 0x3

	/*
	* Number of gate keepers is implementation defined. But we know the max for
	* this device is 4. Get implementation details from BUILD_CONFIG.
	*/
	#define GATE_KEEPER_OS_SHIFT 16
	#define GATE_KEEPER_OS_MASK 0xf
	#define GATE_KEEPER_OR_SHIFT 0
	#define GATE_KEEPER_OR_MASK 0xf
	#define GATE_KEEPER_FILTER_MASK 0x1

	/* Speculation is enabled by default. */
	#define SPECULATION_CTRL_WRITE_DISABLE (1 << 1)
	#define SPECULATION_CTRL_READ_DISABLE (1 << 0)

	/* Max number of filters allowed is 4. */
	#define INT_STATUS_OVERLAP_SHIFT 16
	#define INT_STATUS_OVERLAP_MASK 0xf
	#define INT_STATUS_OVERRUN_SHIFT 8
	#define INT_STATUS_OVERRUN_MASK 0xf
	#define INT_STATUS_STATUS_SHIFT 0
	#define INT_STATUS_STATUS_MASK 0xf

	#define INT_CLEAR_CLEAR_SHIFT 0
	#define INT_CLEAR_CLEAR_MASK 0xf

	#define FAIL_CONTROL_DIR_SHIFT (1 << 24)
	#define FAIL_CONTROL_DIR_READ 0x0
	#define FAIL_CONTROL_DIR_WRITE 0x1
	#define FAIL_CONTROL_NS_SHIFT (1 << 21)
	#define FAIL_CONTROL_NS_SECURE 0x0
	#define FAIL_CONTROL_NS_NONSECURE 0x1
	#define FAIL_CONTROL_PRIV_SHIFT (1 << 20)
	#define FAIL_CONTROL_PRIV_PRIV 0x0
	#define FAIL_CONTROL_PRIV_UNPRIV 0x1

	/*
	* FAIL_ID_ID_MASK depends on AID_WIDTH which is platform specific.
	* Platform should provide the value on initialisation.
	*/
	#define FAIL_ID_VNET_SHIFT 24
	#define FAIL_ID_VNET_MASK 0xf
	#define FAIL_ID_ID_SHIFT 0

	/* Used along with 'tzc_region_attributes_t' below */
	#define REG_ATTR_SEC_SHIFT 30
	#define REG_ATTR_F_EN_SHIFT 0
	#define REG_ATTR_F_EN_MASK 0xf
	#define REG_ATTR_FILTER_BIT(x) ((1 << x) << REG_ATTR_F_EN_SHIFT)
	#define REG_ATTR_FILTER_BIT_ALL (REG_ATTR_F_EN_MASK << \
	REG_ATTR_F_EN_SHIFT)

	#define REGION_ID_ACCESS_NSAID_WR_EN_SHIFT 16
	#define REGION_ID_ACCESS_NSAID_RD_EN_SHIFT 0
	#define REGION_ID_ACCESS_NSAID_ID_MASK 0xf


	/* Macros for setting Region ID access permissions based on NSAID */
	#define TZC_REGION_ACCESS_RD(id) \
	((1 << (id & REGION_ID_ACCESS_NSAID_ID_MASK)) << \
	REGION_ID_ACCESS_NSAID_RD_EN_SHIFT)
	#define TZC_REGION_ACCESS_WR(id) \
	((1 << (id & REGION_ID_ACCESS_NSAID_ID_MASK)) << \
	REGION_ID_ACCESS_NSAID_WR_EN_SHIFT)
	#define TZC_REGION_ACCESS_RDWR(id) \
	(TZC_REGION_ACCESS_RD(id) \| TZC_REGION_ACCESS_WR(id))

	#define TZC400_COMPONENT_ID 0xb105f00d


	#ifndef __ASSEMBLY__

	#include <stdint.h>

	/*******************************************************************************
	* Function & variable prototypes
	******************************************************************************/

	/*
	* What type of action is expected when an access violation occurs.
	* The memory requested is zeroed. But we can also raise and event to
	* let the system know it happened.
	* We can raise an interrupt(INT) and/or cause an exception(ERR).
	* TZC_ACTION_NONE - No interrupt, no Exception
	* TZC_ACTION_ERR - No interrupt, raise exception -> sync external
	* data abort
	* TZC_ACTION_INT - Raise interrupt, no exception
	* TZC_ACTION_ERR_INT - Raise interrupt, raise exception -> sync
	* external data abort
	*/
	typedef enum {
	TZC_ACTION_NONE = 0,
	TZC_ACTION_ERR = 1,
	TZC_ACTION_INT = 2,
	TZC_ACTION_ERR_INT = (TZC_ACTION_ERR \| TZC_ACTION_INT)
	} tzc_action_t;

	/*
	* Controls secure access to a region. If not enabled secure access is not
	* allowed to region.
	*/
	typedef enum {
	TZC_REGION_S_NONE = 0,
	TZC_REGION_S_RD = 1,
	TZC_REGION_S_WR = 2,
	TZC_REGION_S_RDWR = (TZC_REGION_S_RD \| TZC_REGION_S_WR)
	} tzc_region_attributes_t;


	void tzc_init(uintptr_t base);
	void tzc_configure_region0(tzc_region_attributes_t sec_attr,
	uint32_t ns_device_access);
	void tzc_configure_region(uint32_t filters,
	uint8_t region,
	uint64_t region_base,
	uint64_t region_top,
	tzc_region_attributes_t sec_attr,
	uint32_t ns_device_access);
	void tzc_enable_filters(void);
	void tzc_disable_filters(void);
	void tzc_set_action(tzc_action_t action);

	#endif /* __ASSEMBLY__ */

	#endif /* __TZC400__ */