| /* |
| * Copyright (c) 2019-2020, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <stddef.h> |
| |
| #include <common/debug.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/spi_nor.h> |
| #include <lib/utils.h> |
| |
| #define SR_WIP BIT(0) /* Write in progress */ |
| #define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */ |
| #define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */ |
| #define FSR_READY BIT(7) /* Device status, 0 = Busy, 1 = Ready */ |
| |
| /* Defined IDs for supported memories */ |
| #define SPANSION_ID 0x01U |
| #define MACRONIX_ID 0xC2U |
| #define MICRON_ID 0x2CU |
| |
| #define BANK_SIZE 0x1000000U |
| |
| #define SPI_READY_TIMEOUT_US 40000U |
| |
| static struct nor_device nor_dev; |
| |
| #pragma weak plat_get_nor_data |
| int plat_get_nor_data(struct nor_device *device) |
| { |
| return 0; |
| } |
| |
| static int spi_nor_reg(uint8_t reg, uint8_t *buf, size_t len, |
| enum spi_mem_data_dir dir) |
| { |
| struct spi_mem_op op; |
| |
| zeromem(&op, sizeof(struct spi_mem_op)); |
| op.cmd.opcode = reg; |
| op.cmd.buswidth = SPI_MEM_BUSWIDTH_1_LINE; |
| op.data.buswidth = SPI_MEM_BUSWIDTH_1_LINE; |
| op.data.dir = dir; |
| op.data.nbytes = len; |
| op.data.buf = buf; |
| |
| return spi_mem_exec_op(&op); |
| } |
| |
| static inline int spi_nor_read_id(uint8_t *id) |
| { |
| return spi_nor_reg(SPI_NOR_OP_READ_ID, id, 1U, SPI_MEM_DATA_IN); |
| } |
| |
| static inline int spi_nor_read_cr(uint8_t *cr) |
| { |
| return spi_nor_reg(SPI_NOR_OP_READ_CR, cr, 1U, SPI_MEM_DATA_IN); |
| } |
| |
| static inline int spi_nor_read_sr(uint8_t *sr) |
| { |
| return spi_nor_reg(SPI_NOR_OP_READ_SR, sr, 1U, SPI_MEM_DATA_IN); |
| } |
| |
| static inline int spi_nor_read_fsr(uint8_t *fsr) |
| { |
| return spi_nor_reg(SPI_NOR_OP_READ_FSR, fsr, 1U, SPI_MEM_DATA_IN); |
| } |
| |
| static inline int spi_nor_write_en(void) |
| { |
| return spi_nor_reg(SPI_NOR_OP_WREN, NULL, 0U, SPI_MEM_DATA_OUT); |
| } |
| |
| /* |
| * Check if device is ready. |
| * |
| * Return 0 if ready, 1 if busy or a negative error code otherwise |
| */ |
| static int spi_nor_ready(void) |
| { |
| uint8_t sr; |
| int ret; |
| |
| ret = spi_nor_read_sr(&sr); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((nor_dev.flags & SPI_NOR_USE_FSR) != 0U) { |
| uint8_t fsr; |
| |
| ret = spi_nor_read_fsr(&fsr); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| return (((fsr & FSR_READY) != 0U) && ((sr & SR_WIP) == 0U)) ? |
| 0 : 1; |
| } |
| |
| return (((sr & SR_WIP) != 0U) ? 1 : 0); |
| } |
| |
| static int spi_nor_wait_ready(void) |
| { |
| int ret; |
| uint64_t timeout = timeout_init_us(SPI_READY_TIMEOUT_US); |
| |
| while (!timeout_elapsed(timeout)) { |
| ret = spi_nor_ready(); |
| if (ret <= 0) { |
| return ret; |
| } |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int spi_nor_macronix_quad_enable(void) |
| { |
| uint8_t sr; |
| int ret; |
| |
| ret = spi_nor_read_sr(&sr); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((sr & SR_QUAD_EN_MX) == 0U) { |
| return 0; |
| } |
| |
| ret = spi_nor_write_en(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| sr |= SR_QUAD_EN_MX; |
| ret = spi_nor_reg(SPI_NOR_OP_WRSR, &sr, 1, SPI_MEM_DATA_OUT); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = spi_nor_wait_ready(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = spi_nor_read_sr(&sr); |
| if ((ret != 0) || ((sr & SR_QUAD_EN_MX) == 0U)) { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int spi_nor_write_sr_cr(uint8_t *sr_cr) |
| { |
| int ret; |
| |
| ret = spi_nor_write_en(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = spi_nor_reg(SPI_NOR_OP_WRSR, sr_cr, 2, SPI_MEM_DATA_OUT); |
| if (ret != 0) { |
| return -EINVAL; |
| } |
| |
| ret = spi_nor_wait_ready(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int spi_nor_quad_enable(void) |
| { |
| uint8_t sr_cr[2]; |
| int ret; |
| |
| ret = spi_nor_read_cr(&sr_cr[1]); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((sr_cr[1] & CR_QUAD_EN_SPAN) != 0U) { |
| return 0; |
| } |
| |
| sr_cr[1] |= CR_QUAD_EN_SPAN; |
| ret = spi_nor_read_sr(&sr_cr[0]); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = spi_nor_write_sr_cr(sr_cr); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = spi_nor_read_cr(&sr_cr[1]); |
| if ((ret != 0) || ((sr_cr[1] & CR_QUAD_EN_SPAN) == 0U)) { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int spi_nor_clean_bar(void) |
| { |
| int ret; |
| |
| if (nor_dev.selected_bank == 0U) { |
| return 0; |
| } |
| |
| nor_dev.selected_bank = 0U; |
| |
| ret = spi_nor_write_en(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| return spi_nor_reg(nor_dev.bank_write_cmd, &nor_dev.selected_bank, |
| 1, SPI_MEM_DATA_OUT); |
| } |
| |
| static int spi_nor_write_bar(uint32_t offset) |
| { |
| uint8_t selected_bank = offset / BANK_SIZE; |
| int ret; |
| |
| if (selected_bank == nor_dev.selected_bank) { |
| return 0; |
| } |
| |
| ret = spi_nor_write_en(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = spi_nor_reg(nor_dev.bank_write_cmd, &selected_bank, |
| 1, SPI_MEM_DATA_OUT); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| nor_dev.selected_bank = selected_bank; |
| |
| return 0; |
| } |
| |
| static int spi_nor_read_bar(void) |
| { |
| uint8_t selected_bank = 0; |
| int ret; |
| |
| ret = spi_nor_reg(nor_dev.bank_read_cmd, &selected_bank, |
| 1, SPI_MEM_DATA_IN); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| nor_dev.selected_bank = selected_bank; |
| |
| return 0; |
| } |
| |
| int spi_nor_read(unsigned int offset, uintptr_t buffer, size_t length, |
| size_t *length_read) |
| { |
| size_t remain_len; |
| int ret; |
| |
| *length_read = 0; |
| nor_dev.read_op.addr.val = offset; |
| nor_dev.read_op.data.buf = (void *)buffer; |
| |
| VERBOSE("%s offset %i length %zu\n", __func__, offset, length); |
| |
| while (length != 0U) { |
| if ((nor_dev.flags & SPI_NOR_USE_BANK) != 0U) { |
| ret = spi_nor_write_bar(nor_dev.read_op.addr.val); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| remain_len = (BANK_SIZE * (nor_dev.selected_bank + 1)) - |
| nor_dev.read_op.addr.val; |
| nor_dev.read_op.data.nbytes = MIN(length, remain_len); |
| } else { |
| nor_dev.read_op.data.nbytes = length; |
| } |
| |
| ret = spi_mem_exec_op(&nor_dev.read_op); |
| if (ret != 0) { |
| spi_nor_clean_bar(); |
| return ret; |
| } |
| |
| length -= nor_dev.read_op.data.nbytes; |
| nor_dev.read_op.addr.val += nor_dev.read_op.data.nbytes; |
| nor_dev.read_op.data.buf += nor_dev.read_op.data.nbytes; |
| *length_read += nor_dev.read_op.data.nbytes; |
| } |
| |
| if ((nor_dev.flags & SPI_NOR_USE_BANK) != 0U) { |
| ret = spi_nor_clean_bar(); |
| if (ret != 0) { |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int spi_nor_init(unsigned long long *size, unsigned int *erase_size) |
| { |
| int ret = 0; |
| uint8_t id; |
| |
| /* Default read command used */ |
| nor_dev.read_op.cmd.opcode = SPI_NOR_OP_READ; |
| nor_dev.read_op.cmd.buswidth = SPI_MEM_BUSWIDTH_1_LINE; |
| nor_dev.read_op.addr.nbytes = 3U; |
| nor_dev.read_op.addr.buswidth = SPI_MEM_BUSWIDTH_1_LINE; |
| nor_dev.read_op.data.buswidth = SPI_MEM_BUSWIDTH_1_LINE; |
| nor_dev.read_op.data.dir = SPI_MEM_DATA_IN; |
| |
| if (plat_get_nor_data(&nor_dev) != 0) { |
| return -EINVAL; |
| } |
| |
| assert(nor_dev.size != 0); |
| |
| if (nor_dev.size > BANK_SIZE) { |
| nor_dev.flags |= SPI_NOR_USE_BANK; |
| } |
| |
| *size = nor_dev.size; |
| |
| ret = spi_nor_read_id(&id); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((nor_dev.flags & SPI_NOR_USE_BANK) != 0U) { |
| switch (id) { |
| case SPANSION_ID: |
| nor_dev.bank_read_cmd = SPINOR_OP_BRRD; |
| nor_dev.bank_write_cmd = SPINOR_OP_BRWR; |
| break; |
| default: |
| nor_dev.bank_read_cmd = SPINOR_OP_RDEAR; |
| nor_dev.bank_write_cmd = SPINOR_OP_WREAR; |
| break; |
| } |
| } |
| |
| if (nor_dev.read_op.data.buswidth == 4U) { |
| switch (id) { |
| case MACRONIX_ID: |
| INFO("Enable Macronix quad support\n"); |
| ret = spi_nor_macronix_quad_enable(); |
| break; |
| case MICRON_ID: |
| break; |
| default: |
| ret = spi_nor_quad_enable(); |
| break; |
| } |
| } |
| |
| if ((ret == 0) && ((nor_dev.flags & SPI_NOR_USE_BANK) != 0U)) { |
| ret = spi_nor_read_bar(); |
| } |
| |
| return ret; |
| } |