| /* |
| * Copyright (c) 2018, STMicroelectronics - All Rights Reserved |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <string.h> |
| |
| #include <libfdt.h> |
| |
| #include <platform_def.h> |
| |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/mmc.h> |
| #include <drivers/st/stm32_sdmmc2.h> |
| #include <drivers/st/stm32mp1_clk.h> |
| #include <drivers/st/stm32mp1_rcc.h> |
| #include <drivers/st/stm32mp1_reset.h> |
| #include <dt-bindings/clock/stm32mp1-clks.h> |
| #include <dt-bindings/reset/stm32mp1-resets.h> |
| #include <lib/mmio.h> |
| #include <lib/utils.h> |
| #include <plat/common/platform.h> |
| |
| /* Registers offsets */ |
| #define SDMMC_POWER 0x00U |
| #define SDMMC_CLKCR 0x04U |
| #define SDMMC_ARGR 0x08U |
| #define SDMMC_CMDR 0x0CU |
| #define SDMMC_RESPCMDR 0x10U |
| #define SDMMC_RESP1R 0x14U |
| #define SDMMC_RESP2R 0x18U |
| #define SDMMC_RESP3R 0x1CU |
| #define SDMMC_RESP4R 0x20U |
| #define SDMMC_DTIMER 0x24U |
| #define SDMMC_DLENR 0x28U |
| #define SDMMC_DCTRLR 0x2CU |
| #define SDMMC_DCNTR 0x30U |
| #define SDMMC_STAR 0x34U |
| #define SDMMC_ICR 0x38U |
| #define SDMMC_MASKR 0x3CU |
| #define SDMMC_ACKTIMER 0x40U |
| #define SDMMC_IDMACTRLR 0x50U |
| #define SDMMC_IDMABSIZER 0x54U |
| #define SDMMC_IDMABASE0R 0x58U |
| #define SDMMC_IDMABASE1R 0x5CU |
| #define SDMMC_FIFOR 0x80U |
| |
| /* SDMMC power control register */ |
| #define SDMMC_POWER_PWRCTRL GENMASK(1, 0) |
| #define SDMMC_POWER_DIRPOL BIT(4) |
| |
| /* SDMMC clock control register */ |
| #define SDMMC_CLKCR_WIDBUS_4 BIT(14) |
| #define SDMMC_CLKCR_WIDBUS_8 BIT(15) |
| #define SDMMC_CLKCR_NEGEDGE BIT(16) |
| #define SDMMC_CLKCR_HWFC_EN BIT(17) |
| #define SDMMC_CLKCR_SELCLKRX_0 BIT(20) |
| |
| /* SDMMC command register */ |
| #define SDMMC_CMDR_CMDTRANS BIT(6) |
| #define SDMMC_CMDR_CMDSTOP BIT(7) |
| #define SDMMC_CMDR_WAITRESP GENMASK(9, 8) |
| #define SDMMC_CMDR_WAITRESP_SHORT BIT(8) |
| #define SDMMC_CMDR_WAITRESP_SHORT_NOCRC BIT(9) |
| #define SDMMC_CMDR_CPSMEN BIT(12) |
| |
| /* SDMMC data control register */ |
| #define SDMMC_DCTRLR_DTEN BIT(0) |
| #define SDMMC_DCTRLR_DTDIR BIT(1) |
| #define SDMMC_DCTRLR_DTMODE GENMASK(3, 2) |
| #define SDMMC_DCTRLR_DBLOCKSIZE_0 BIT(4) |
| #define SDMMC_DCTRLR_DBLOCKSIZE_1 BIT(5) |
| #define SDMMC_DCTRLR_DBLOCKSIZE_3 BIT(7) |
| #define SDMMC_DCTRLR_DBLOCKSIZE GENMASK(7, 4) |
| #define SDMMC_DCTRLR_FIFORST BIT(13) |
| |
| #define SDMMC_DCTRLR_CLEAR_MASK (SDMMC_DCTRLR_DTEN | \ |
| SDMMC_DCTRLR_DTDIR | \ |
| SDMMC_DCTRLR_DTMODE | \ |
| SDMMC_DCTRLR_DBLOCKSIZE) |
| #define SDMMC_DBLOCKSIZE_8 (SDMMC_DCTRLR_DBLOCKSIZE_0 | \ |
| SDMMC_DCTRLR_DBLOCKSIZE_1) |
| #define SDMMC_DBLOCKSIZE_512 (SDMMC_DCTRLR_DBLOCKSIZE_0 | \ |
| SDMMC_DCTRLR_DBLOCKSIZE_3) |
| |
| /* SDMMC status register */ |
| #define SDMMC_STAR_CCRCFAIL BIT(0) |
| #define SDMMC_STAR_DCRCFAIL BIT(1) |
| #define SDMMC_STAR_CTIMEOUT BIT(2) |
| #define SDMMC_STAR_DTIMEOUT BIT(3) |
| #define SDMMC_STAR_TXUNDERR BIT(4) |
| #define SDMMC_STAR_RXOVERR BIT(5) |
| #define SDMMC_STAR_CMDREND BIT(6) |
| #define SDMMC_STAR_CMDSENT BIT(7) |
| #define SDMMC_STAR_DATAEND BIT(8) |
| #define SDMMC_STAR_DBCKEND BIT(10) |
| #define SDMMC_STAR_DPSMACT BIT(12) |
| #define SDMMC_STAR_RXFIFOHF BIT(15) |
| #define SDMMC_STAR_RXFIFOE BIT(19) |
| #define SDMMC_STAR_IDMATE BIT(27) |
| #define SDMMC_STAR_IDMABTC BIT(28) |
| |
| /* SDMMC DMA control register */ |
| #define SDMMC_IDMACTRLR_IDMAEN BIT(0) |
| |
| #define SDMMC_STATIC_FLAGS (SDMMC_STAR_CCRCFAIL | \ |
| SDMMC_STAR_DCRCFAIL | \ |
| SDMMC_STAR_CTIMEOUT | \ |
| SDMMC_STAR_DTIMEOUT | \ |
| SDMMC_STAR_TXUNDERR | \ |
| SDMMC_STAR_RXOVERR | \ |
| SDMMC_STAR_CMDREND | \ |
| SDMMC_STAR_CMDSENT | \ |
| SDMMC_STAR_DATAEND | \ |
| SDMMC_STAR_DBCKEND | \ |
| SDMMC_STAR_IDMATE | \ |
| SDMMC_STAR_IDMABTC) |
| |
| #define TIMEOUT_10_MS (plat_get_syscnt_freq2() / 100U) |
| #define TIMEOUT_1_S plat_get_syscnt_freq2() |
| |
| #define DT_SDMMC2_COMPAT "st,stm32-sdmmc2" |
| |
| static void stm32_sdmmc2_init(void); |
| static int stm32_sdmmc2_send_cmd_req(struct mmc_cmd *cmd); |
| static int stm32_sdmmc2_send_cmd(struct mmc_cmd *cmd); |
| static int stm32_sdmmc2_set_ios(unsigned int clk, unsigned int width); |
| static int stm32_sdmmc2_prepare(int lba, uintptr_t buf, size_t size); |
| static int stm32_sdmmc2_read(int lba, uintptr_t buf, size_t size); |
| static int stm32_sdmmc2_write(int lba, uintptr_t buf, size_t size); |
| |
| static const struct mmc_ops stm32_sdmmc2_ops = { |
| .init = stm32_sdmmc2_init, |
| .send_cmd = stm32_sdmmc2_send_cmd, |
| .set_ios = stm32_sdmmc2_set_ios, |
| .prepare = stm32_sdmmc2_prepare, |
| .read = stm32_sdmmc2_read, |
| .write = stm32_sdmmc2_write, |
| }; |
| |
| static struct stm32_sdmmc2_params sdmmc2_params; |
| |
| #pragma weak plat_sdmmc2_use_dma |
| bool plat_sdmmc2_use_dma(unsigned int instance, unsigned int memory) |
| { |
| return false; |
| } |
| |
| static void stm32_sdmmc2_init(void) |
| { |
| uint32_t clock_div; |
| uintptr_t base = sdmmc2_params.reg_base; |
| |
| clock_div = div_round_up(sdmmc2_params.clk_rate, |
| STM32MP1_MMC_INIT_FREQ * 2); |
| |
| mmio_write_32(base + SDMMC_CLKCR, SDMMC_CLKCR_HWFC_EN | clock_div | |
| sdmmc2_params.negedge | |
| sdmmc2_params.pin_ckin); |
| |
| mmio_write_32(base + SDMMC_POWER, |
| SDMMC_POWER_PWRCTRL | sdmmc2_params.dirpol); |
| |
| mdelay(1); |
| } |
| |
| static int stm32_sdmmc2_stop_transfer(void) |
| { |
| struct mmc_cmd cmd_stop; |
| |
| zeromem(&cmd_stop, sizeof(struct mmc_cmd)); |
| |
| cmd_stop.cmd_idx = MMC_CMD(12); |
| cmd_stop.resp_type = MMC_RESPONSE_R1B; |
| |
| return stm32_sdmmc2_send_cmd(&cmd_stop); |
| } |
| |
| static int stm32_sdmmc2_send_cmd_req(struct mmc_cmd *cmd) |
| { |
| uint32_t flags_cmd, status; |
| uint32_t flags_data = 0; |
| int err = 0; |
| uintptr_t base = sdmmc2_params.reg_base; |
| unsigned int cmd_reg, arg_reg, start; |
| |
| if (cmd == NULL) { |
| return -EINVAL; |
| } |
| |
| flags_cmd = SDMMC_STAR_CTIMEOUT; |
| arg_reg = cmd->cmd_arg; |
| |
| if ((mmio_read_32(base + SDMMC_CMDR) & SDMMC_CMDR_CPSMEN) != 0U) { |
| mmio_write_32(base + SDMMC_CMDR, 0); |
| } |
| |
| cmd_reg = cmd->cmd_idx | SDMMC_CMDR_CPSMEN; |
| |
| if (cmd->resp_type == 0U) { |
| flags_cmd |= SDMMC_STAR_CMDSENT; |
| } |
| |
| if ((cmd->resp_type & MMC_RSP_48) != 0U) { |
| if ((cmd->resp_type & MMC_RSP_136) != 0U) { |
| flags_cmd |= SDMMC_STAR_CMDREND; |
| cmd_reg |= SDMMC_CMDR_WAITRESP; |
| } else if ((cmd->resp_type & MMC_RSP_CRC) != 0U) { |
| flags_cmd |= SDMMC_STAR_CMDREND | SDMMC_STAR_CCRCFAIL; |
| cmd_reg |= SDMMC_CMDR_WAITRESP_SHORT; |
| } else { |
| flags_cmd |= SDMMC_STAR_CMDREND; |
| cmd_reg |= SDMMC_CMDR_WAITRESP_SHORT_NOCRC; |
| } |
| } |
| |
| switch (cmd->cmd_idx) { |
| case MMC_CMD(1): |
| arg_reg |= OCR_POWERUP; |
| break; |
| case MMC_CMD(8): |
| if (sdmmc2_params.device_info->mmc_dev_type == MMC_IS_EMMC) { |
| cmd_reg |= SDMMC_CMDR_CMDTRANS; |
| } |
| break; |
| case MMC_CMD(12): |
| cmd_reg |= SDMMC_CMDR_CMDSTOP; |
| break; |
| case MMC_CMD(17): |
| case MMC_CMD(18): |
| cmd_reg |= SDMMC_CMDR_CMDTRANS; |
| if (sdmmc2_params.use_dma) { |
| flags_data |= SDMMC_STAR_DCRCFAIL | |
| SDMMC_STAR_DTIMEOUT | |
| SDMMC_STAR_DATAEND | |
| SDMMC_STAR_RXOVERR | |
| SDMMC_STAR_IDMATE; |
| } |
| break; |
| case MMC_ACMD(41): |
| arg_reg |= OCR_3_2_3_3 | OCR_3_3_3_4; |
| break; |
| case MMC_ACMD(51): |
| cmd_reg |= SDMMC_CMDR_CMDTRANS; |
| if (sdmmc2_params.use_dma) { |
| flags_data |= SDMMC_STAR_DCRCFAIL | |
| SDMMC_STAR_DTIMEOUT | |
| SDMMC_STAR_DATAEND | |
| SDMMC_STAR_RXOVERR | |
| SDMMC_STAR_IDMATE | |
| SDMMC_STAR_DBCKEND; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if ((cmd->resp_type & MMC_RSP_BUSY) != 0U) { |
| mmio_write_32(base + SDMMC_DTIMER, UINT32_MAX); |
| } |
| |
| mmio_write_32(base + SDMMC_ARGR, arg_reg); |
| |
| mmio_write_32(base + SDMMC_CMDR, cmd_reg); |
| |
| status = mmio_read_32(base + SDMMC_STAR); |
| |
| start = get_timer(0); |
| |
| while ((status & flags_cmd) == 0U) { |
| if (get_timer(start) > TIMEOUT_10_MS) { |
| err = -ETIMEDOUT; |
| ERROR("%s: timeout 10ms (cmd = %d,status = %x)\n", |
| __func__, cmd->cmd_idx, status); |
| goto err_exit; |
| } |
| |
| status = mmio_read_32(base + SDMMC_STAR); |
| } |
| |
| if ((status & (SDMMC_STAR_CTIMEOUT | SDMMC_STAR_CCRCFAIL)) != 0U) { |
| if ((status & SDMMC_STAR_CTIMEOUT) != 0U) { |
| err = -ETIMEDOUT; |
| /* |
| * Those timeouts can occur, and framework will handle |
| * the retries. CMD8 is expected to return this timeout |
| * for eMMC |
| */ |
| if (!((cmd->cmd_idx == MMC_CMD(1)) || |
| (cmd->cmd_idx == MMC_CMD(13)) || |
| ((cmd->cmd_idx == MMC_CMD(8)) && |
| (cmd->resp_type == MMC_RESPONSE_R7)))) { |
| ERROR("%s: CTIMEOUT (cmd = %d,status = %x)\n", |
| __func__, cmd->cmd_idx, status); |
| } |
| } else { |
| err = -EIO; |
| ERROR("%s: CRCFAIL (cmd = %d,status = %x)\n", |
| __func__, cmd->cmd_idx, status); |
| } |
| |
| goto err_exit; |
| } |
| |
| if ((cmd_reg & SDMMC_CMDR_WAITRESP) != 0U) { |
| if ((cmd->cmd_idx == MMC_CMD(9)) && |
| ((cmd_reg & SDMMC_CMDR_WAITRESP) == SDMMC_CMDR_WAITRESP)) { |
| /* Need to invert response to match CSD structure */ |
| cmd->resp_data[0] = mmio_read_32(base + SDMMC_RESP4R); |
| cmd->resp_data[1] = mmio_read_32(base + SDMMC_RESP3R); |
| cmd->resp_data[2] = mmio_read_32(base + SDMMC_RESP2R); |
| cmd->resp_data[3] = mmio_read_32(base + SDMMC_RESP1R); |
| } else { |
| cmd->resp_data[0] = mmio_read_32(base + SDMMC_RESP1R); |
| if ((cmd_reg & SDMMC_CMDR_WAITRESP) == |
| SDMMC_CMDR_WAITRESP) { |
| cmd->resp_data[1] = mmio_read_32(base + |
| SDMMC_RESP2R); |
| cmd->resp_data[2] = mmio_read_32(base + |
| SDMMC_RESP3R); |
| cmd->resp_data[3] = mmio_read_32(base + |
| SDMMC_RESP4R); |
| } |
| } |
| } |
| |
| if (flags_data == 0U) { |
| mmio_write_32(base + SDMMC_ICR, SDMMC_STATIC_FLAGS); |
| |
| return 0; |
| } |
| |
| status = mmio_read_32(base + SDMMC_STAR); |
| |
| start = get_timer(0); |
| |
| while ((status & flags_data) == 0U) { |
| if (get_timer(start) > TIMEOUT_10_MS) { |
| ERROR("%s: timeout 10ms (cmd = %d,status = %x)\n", |
| __func__, cmd->cmd_idx, status); |
| err = -ETIMEDOUT; |
| goto err_exit; |
| } |
| |
| status = mmio_read_32(base + SDMMC_STAR); |
| }; |
| |
| if ((status & (SDMMC_STAR_DTIMEOUT | SDMMC_STAR_DCRCFAIL | |
| SDMMC_STAR_TXUNDERR | SDMMC_STAR_RXOVERR | |
| SDMMC_STAR_IDMATE)) != 0U) { |
| ERROR("%s: Error flag (cmd = %d,status = %x)\n", __func__, |
| cmd->cmd_idx, status); |
| err = -EIO; |
| } |
| |
| err_exit: |
| mmio_write_32(base + SDMMC_ICR, SDMMC_STATIC_FLAGS); |
| mmio_clrbits_32(base + SDMMC_CMDR, SDMMC_CMDR_CMDTRANS); |
| |
| if (err != 0) { |
| int ret_stop = stm32_sdmmc2_stop_transfer(); |
| |
| if (ret_stop != 0) { |
| return ret_stop; |
| } |
| } |
| |
| return err; |
| } |
| |
| static int stm32_sdmmc2_send_cmd(struct mmc_cmd *cmd) |
| { |
| int8_t retry; |
| int err = 0; |
| |
| assert(cmd != NULL); |
| |
| for (retry = 0; retry <= 3; retry++) { |
| err = stm32_sdmmc2_send_cmd_req(cmd); |
| if (err == 0) { |
| return err; |
| } |
| |
| if ((cmd->cmd_idx == MMC_CMD(1)) || |
| (cmd->cmd_idx == MMC_CMD(13))) { |
| return 0; /* Retry managed by framework */ |
| } |
| |
| /* Command 8 is expected to fail for eMMC */ |
| if (!(cmd->cmd_idx == MMC_CMD(8))) { |
| WARN(" CMD%d, Retry: %d, Error: %d\n", |
| cmd->cmd_idx, retry, err); |
| } |
| |
| udelay(10); |
| } |
| |
| return err; |
| } |
| |
| static int stm32_sdmmc2_set_ios(unsigned int clk, unsigned int width) |
| { |
| uintptr_t base = sdmmc2_params.reg_base; |
| uint32_t bus_cfg = 0; |
| uint32_t clock_div, max_freq; |
| uint32_t clk_rate = sdmmc2_params.clk_rate; |
| uint32_t max_bus_freq = sdmmc2_params.device_info->max_bus_freq; |
| |
| switch (width) { |
| case MMC_BUS_WIDTH_1: |
| break; |
| case MMC_BUS_WIDTH_4: |
| bus_cfg |= SDMMC_CLKCR_WIDBUS_4; |
| break; |
| case MMC_BUS_WIDTH_8: |
| bus_cfg |= SDMMC_CLKCR_WIDBUS_8; |
| break; |
| default: |
| panic(); |
| break; |
| } |
| |
| if (sdmmc2_params.device_info->mmc_dev_type == MMC_IS_EMMC) { |
| if (max_bus_freq >= 52000000U) { |
| max_freq = STM32MP1_EMMC_HIGH_SPEED_MAX_FREQ; |
| } else { |
| max_freq = STM32MP1_EMMC_NORMAL_SPEED_MAX_FREQ; |
| } |
| } else { |
| if (max_bus_freq >= 50000000U) { |
| max_freq = STM32MP1_SD_HIGH_SPEED_MAX_FREQ; |
| } else { |
| max_freq = STM32MP1_SD_NORMAL_SPEED_MAX_FREQ; |
| } |
| } |
| |
| clock_div = div_round_up(clk_rate, max_freq * 2); |
| |
| mmio_write_32(base + SDMMC_CLKCR, |
| SDMMC_CLKCR_HWFC_EN | clock_div | bus_cfg | |
| sdmmc2_params.negedge | |
| sdmmc2_params.pin_ckin); |
| |
| return 0; |
| } |
| |
| static int stm32_sdmmc2_prepare(int lba, uintptr_t buf, size_t size) |
| { |
| struct mmc_cmd cmd; |
| int ret; |
| uintptr_t base = sdmmc2_params.reg_base; |
| uint32_t data_ctrl = SDMMC_DCTRLR_DTDIR; |
| |
| if (size == 8U) { |
| data_ctrl |= SDMMC_DBLOCKSIZE_8; |
| } else { |
| data_ctrl |= SDMMC_DBLOCKSIZE_512; |
| } |
| |
| sdmmc2_params.use_dma = plat_sdmmc2_use_dma(base, buf); |
| |
| if (sdmmc2_params.use_dma) { |
| inv_dcache_range(buf, size); |
| } |
| |
| /* Prepare CMD 16*/ |
| mmio_write_32(base + SDMMC_DTIMER, UINT32_MAX); |
| |
| mmio_write_32(base + SDMMC_DLENR, 0); |
| |
| mmio_clrsetbits_32(base + SDMMC_DCTRLR, |
| SDMMC_DCTRLR_CLEAR_MASK, SDMMC_DCTRLR_DTDIR); |
| |
| zeromem(&cmd, sizeof(struct mmc_cmd)); |
| |
| cmd.cmd_idx = MMC_CMD(16); |
| if (size > MMC_BLOCK_SIZE) { |
| cmd.cmd_arg = MMC_BLOCK_SIZE; |
| } else { |
| cmd.cmd_arg = size; |
| } |
| |
| cmd.resp_type = MMC_RESPONSE_R1; |
| |
| ret = stm32_sdmmc2_send_cmd(&cmd); |
| if (ret != 0) { |
| ERROR("CMD16 failed\n"); |
| return ret; |
| } |
| |
| /* Prepare data command */ |
| mmio_write_32(base + SDMMC_DTIMER, UINT32_MAX); |
| |
| mmio_write_32(base + SDMMC_DLENR, size); |
| |
| if (sdmmc2_params.use_dma) { |
| mmio_write_32(base + SDMMC_IDMACTRLR, |
| SDMMC_IDMACTRLR_IDMAEN); |
| mmio_write_32(base + SDMMC_IDMABASE0R, buf); |
| |
| flush_dcache_range(buf, size); |
| } |
| |
| mmio_clrsetbits_32(base + SDMMC_DCTRLR, |
| SDMMC_DCTRLR_CLEAR_MASK, |
| data_ctrl); |
| |
| return 0; |
| } |
| |
| static int stm32_sdmmc2_read(int lba, uintptr_t buf, size_t size) |
| { |
| uint32_t error_flags = SDMMC_STAR_RXOVERR | SDMMC_STAR_DCRCFAIL | |
| SDMMC_STAR_DTIMEOUT; |
| uint32_t flags = error_flags | SDMMC_STAR_DATAEND; |
| uint32_t status; |
| uint32_t *buffer; |
| uintptr_t base = sdmmc2_params.reg_base; |
| uintptr_t fifo_reg = base + SDMMC_FIFOR; |
| unsigned int start; |
| int ret; |
| |
| /* Assert buf is 4 bytes aligned */ |
| assert((buf & GENMASK(1, 0)) == 0U); |
| |
| buffer = (uint32_t *)buf; |
| |
| if (sdmmc2_params.use_dma) { |
| inv_dcache_range(buf, size); |
| |
| return 0; |
| } |
| |
| if (size <= MMC_BLOCK_SIZE) { |
| flags |= SDMMC_STAR_DBCKEND; |
| } |
| |
| start = get_timer(0); |
| |
| do { |
| status = mmio_read_32(base + SDMMC_STAR); |
| |
| if ((status & error_flags) != 0U) { |
| ERROR("%s: Read error (status = %x)\n", __func__, |
| status); |
| mmio_write_32(base + SDMMC_DCTRLR, |
| SDMMC_DCTRLR_FIFORST); |
| |
| mmio_write_32(base + SDMMC_ICR, |
| SDMMC_STATIC_FLAGS); |
| |
| ret = stm32_sdmmc2_stop_transfer(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| return -EIO; |
| } |
| |
| if (get_timer(start) > TIMEOUT_1_S) { |
| ERROR("%s: timeout 1s (status = %x)\n", |
| __func__, status); |
| mmio_write_32(base + SDMMC_ICR, |
| SDMMC_STATIC_FLAGS); |
| |
| ret = stm32_sdmmc2_stop_transfer(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| if (size < (8U * sizeof(uint32_t))) { |
| if ((mmio_read_32(base + SDMMC_DCNTR) > 0U) && |
| ((status & SDMMC_STAR_RXFIFOE) == 0U)) { |
| *buffer = mmio_read_32(fifo_reg); |
| buffer++; |
| } |
| } else if ((status & SDMMC_STAR_RXFIFOHF) != 0U) { |
| uint32_t count; |
| |
| /* Read data from SDMMC Rx FIFO */ |
| for (count = 0; count < 8U; count++) { |
| *buffer = mmio_read_32(fifo_reg); |
| buffer++; |
| } |
| } |
| } while ((status & flags) == 0U); |
| |
| mmio_write_32(base + SDMMC_ICR, SDMMC_STATIC_FLAGS); |
| |
| if ((status & SDMMC_STAR_DPSMACT) != 0U) { |
| WARN("%s: DPSMACT=1, send stop\n", __func__); |
| return stm32_sdmmc2_stop_transfer(); |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_sdmmc2_write(int lba, uintptr_t buf, size_t size) |
| { |
| return 0; |
| } |
| |
| static int stm32_sdmmc2_dt_get_config(void) |
| { |
| int sdmmc_node; |
| void *fdt = NULL; |
| const fdt32_t *cuint; |
| |
| if (fdt_get_address(&fdt) == 0) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| if (fdt == NULL) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| sdmmc_node = fdt_node_offset_by_compatible(fdt, -1, DT_SDMMC2_COMPAT); |
| |
| while (sdmmc_node != -FDT_ERR_NOTFOUND) { |
| cuint = fdt_getprop(fdt, sdmmc_node, "reg", NULL); |
| if (cuint == NULL) { |
| continue; |
| } |
| |
| if (fdt32_to_cpu(*cuint) == sdmmc2_params.reg_base) { |
| break; |
| } |
| |
| sdmmc_node = fdt_node_offset_by_compatible(fdt, sdmmc_node, |
| DT_SDMMC2_COMPAT); |
| } |
| |
| if (sdmmc_node == -FDT_ERR_NOTFOUND) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| if (fdt_check_status(sdmmc_node) == 0) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| if (dt_set_pinctrl_config(sdmmc_node) != 0) { |
| return -FDT_ERR_BADVALUE; |
| } |
| |
| cuint = fdt_getprop(fdt, sdmmc_node, "clocks", NULL); |
| if (cuint == NULL) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| cuint++; |
| sdmmc2_params.clock_id = fdt32_to_cpu(*cuint); |
| |
| cuint = fdt_getprop(fdt, sdmmc_node, "resets", NULL); |
| if (cuint == NULL) { |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| cuint++; |
| sdmmc2_params.reset_id = fdt32_to_cpu(*cuint); |
| |
| if ((fdt_getprop(fdt, sdmmc_node, "st,pin-ckin", NULL)) != NULL) { |
| sdmmc2_params.pin_ckin = SDMMC_CLKCR_SELCLKRX_0; |
| } |
| |
| if ((fdt_getprop(fdt, sdmmc_node, "st,dirpol", NULL)) != NULL) { |
| sdmmc2_params.dirpol = SDMMC_POWER_DIRPOL; |
| } |
| |
| if ((fdt_getprop(fdt, sdmmc_node, "st,negedge", NULL)) != NULL) { |
| sdmmc2_params.negedge = SDMMC_CLKCR_NEGEDGE; |
| } |
| |
| cuint = fdt_getprop(fdt, sdmmc_node, "bus-width", NULL); |
| if (cuint != NULL) { |
| switch (fdt32_to_cpu(*cuint)) { |
| case 4: |
| sdmmc2_params.bus_width = MMC_BUS_WIDTH_4; |
| break; |
| |
| case 8: |
| sdmmc2_params.bus_width = MMC_BUS_WIDTH_8; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| unsigned long long stm32_sdmmc2_mmc_get_device_size(void) |
| { |
| return sdmmc2_params.device_info->device_size; |
| } |
| |
| int stm32_sdmmc2_mmc_init(struct stm32_sdmmc2_params *params) |
| { |
| int ret; |
| |
| assert((params != NULL) && |
| ((params->reg_base & MMC_BLOCK_MASK) == 0U) && |
| ((params->bus_width == MMC_BUS_WIDTH_1) || |
| (params->bus_width == MMC_BUS_WIDTH_4) || |
| (params->bus_width == MMC_BUS_WIDTH_8))); |
| |
| memcpy(&sdmmc2_params, params, sizeof(struct stm32_sdmmc2_params)); |
| |
| if (stm32_sdmmc2_dt_get_config() != 0) { |
| ERROR("%s: DT error\n", __func__); |
| return -ENOMEM; |
| } |
| |
| ret = stm32mp1_clk_enable(sdmmc2_params.clock_id); |
| if (ret != 0) { |
| ERROR("%s: clock %d failed\n", __func__, |
| sdmmc2_params.clock_id); |
| return ret; |
| } |
| |
| stm32mp1_reset_assert(sdmmc2_params.reset_id); |
| udelay(2); |
| stm32mp1_reset_deassert(sdmmc2_params.reset_id); |
| mdelay(1); |
| |
| sdmmc2_params.clk_rate = stm32mp1_clk_get_rate(sdmmc2_params.clock_id); |
| |
| return mmc_init(&stm32_sdmmc2_ops, sdmmc2_params.clk_rate, |
| sdmmc2_params.bus_width, sdmmc2_params.flags, |
| sdmmc2_params.device_info); |
| } |