blob: 7ef7e6f89aff46a383181e0a4dce7e38042d0617 [file] [log] [blame]
/*
* Copyright (c) 2018-2022, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <libfdt.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <drivers/arm/css/css_mhu_doorbell.h>
#include <drivers/arm/css/scmi.h>
#include <plat/arm/common/plat_arm.h>
#include <plat/common/platform.h>
#include <plat/arm/css/common/css_pm.h>
#include <sgi_ras.h>
#include <sgi_variant.h>
sgi_platform_info_t sgi_plat_info;
static scmi_channel_plat_info_t sgi575_scmi_plat_info = {
.scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE,
.db_reg_addr = PLAT_CSS_MHU_BASE + CSS_SCMI_MHU_DB_REG_OFF,
.db_preserve_mask = 0xfffffffe,
.db_modify_mask = 0x1,
.ring_doorbell = &mhu_ring_doorbell,
};
static scmi_channel_plat_info_t plat_rd_scmi_info[] = {
{
.scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE,
.db_reg_addr = PLAT_CSS_MHU_BASE + SENDER_REG_SET(0),
.db_preserve_mask = 0xfffffffe,
.db_modify_mask = 0x1,
.ring_doorbell = &mhuv2_ring_doorbell,
},
#if (CSS_SGI_CHIP_COUNT > 1)
{
.scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE +
CSS_SGI_REMOTE_CHIP_MEM_OFFSET(1),
.db_reg_addr = PLAT_CSS_MHU_BASE
+ CSS_SGI_REMOTE_CHIP_MEM_OFFSET(1) + SENDER_REG_SET(0),
.db_preserve_mask = 0xfffffffe,
.db_modify_mask = 0x1,
.ring_doorbell = &mhuv2_ring_doorbell,
},
#endif
#if (CSS_SGI_CHIP_COUNT > 2)
{
.scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE +
CSS_SGI_REMOTE_CHIP_MEM_OFFSET(2),
.db_reg_addr = PLAT_CSS_MHU_BASE +
CSS_SGI_REMOTE_CHIP_MEM_OFFSET(2) + SENDER_REG_SET(0),
.db_preserve_mask = 0xfffffffe,
.db_modify_mask = 0x1,
.ring_doorbell = &mhuv2_ring_doorbell,
},
#endif
#if (CSS_SGI_CHIP_COUNT > 3)
{
.scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE +
CSS_SGI_REMOTE_CHIP_MEM_OFFSET(3),
.db_reg_addr = PLAT_CSS_MHU_BASE +
CSS_SGI_REMOTE_CHIP_MEM_OFFSET(3) + SENDER_REG_SET(0),
.db_preserve_mask = 0xfffffffe,
.db_modify_mask = 0x1,
.ring_doorbell = &mhuv2_ring_doorbell,
},
#endif
};
scmi_channel_plat_info_t *plat_css_get_scmi_info(int channel_id)
{
if (sgi_plat_info.platform_id == RD_N1E1_EDGE_SID_VER_PART_NUM ||
sgi_plat_info.platform_id == RD_V1_SID_VER_PART_NUM ||
sgi_plat_info.platform_id == RD_N2_SID_VER_PART_NUM ||
sgi_plat_info.platform_id == RD_EDMUNDS_SID_VER_PART_NUM ||
sgi_plat_info.platform_id == RD_N2_CFG1_SID_VER_PART_NUM) {
if (channel_id >= ARRAY_SIZE(plat_rd_scmi_info))
panic();
return &plat_rd_scmi_info[channel_id];
}
else if (sgi_plat_info.platform_id == SGI575_SSC_VER_PART_NUM)
return &sgi575_scmi_plat_info;
else
panic();
}
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
sgi_plat_info.platform_id = plat_arm_sgi_get_platform_id();
sgi_plat_info.config_id = plat_arm_sgi_get_config_id();
sgi_plat_info.multi_chip_mode = plat_arm_sgi_get_multi_chip_mode();
arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
}
void sgi_bl31_common_platform_setup(void)
{
arm_bl31_platform_setup();
#if RAS_EXTENSION
sgi_ras_intr_handler_setup();
#endif
/* Configure the warm reboot SGI for primary core */
css_setup_cpu_pwr_down_intr();
#if CSS_SYSTEM_GRACEFUL_RESET
/* Register priority level handlers for reboot */
ehf_register_priority_handler(PLAT_REBOOT_PRI,
css_reboot_interrupt_handler);
#endif
}
const plat_psci_ops_t *plat_arm_psci_override_pm_ops(plat_psci_ops_t *ops)
{
/*
* For RD-E1-Edge, only CPU power ON/OFF, PSCI platform callbacks are
* supported.
*/
if (((sgi_plat_info.platform_id == RD_N1E1_EDGE_SID_VER_PART_NUM) &&
(sgi_plat_info.config_id == RD_E1_EDGE_CONFIG_ID))) {
ops->cpu_standby = NULL;
ops->system_off = NULL;
ops->system_reset = NULL;
ops->get_sys_suspend_power_state = NULL;
ops->pwr_domain_suspend = NULL;
ops->pwr_domain_suspend_finish = NULL;
}
return css_scmi_override_pm_ops(ops);
}