blob: 384bb5140c7b1406f671519b3c6277b53631a7cd [file] [log] [blame]
/*
* Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __ARM_MACROS_S__
#define __ARM_MACROS_S__
#include <cci.h>
#include <gic_common.h>
#include <gicv2.h>
#include <gicv3.h>
#include <platform_def.h>
.section .rodata.gic_reg_name, "aS"
/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
gicc_regs:
.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
/* Applicable only to GICv3 with SRE enabled */
icc_regs:
.asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
/* Registers common to both GICv2 and GICv3 */
gicd_pend_reg:
.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" \
" Offset:\t\t\tvalue\n"
newline:
.asciz "\n"
spacer:
.asciz ":\t\t0x"
/* ---------------------------------------------
* The below utility macro prints out relevant GIC
* registers whenever an unhandled exception is
* taken in BL31 on ARM standard platforms.
* Expects: GICD base in x16, GICC base in x17
* Clobbers: x0 - x10, sp
* ---------------------------------------------
*/
.macro arm_print_gic_regs
/* Check for GICv3 system register access */
mrs x7, id_aa64pfr0_el1
ubfx x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
cmp x7, #1
b.ne print_gicv2
/* Check for SRE enable */
mrs x8, ICC_SRE_EL3
tst x8, #ICC_SRE_SRE_BIT
b.eq print_gicv2
/* Load the icc reg list to x6 */
adr x6, icc_regs
/* Load the icc regs to gp regs used by str_in_crash_buf_print */
mrs x8, ICC_HPPIR0_EL1
mrs x9, ICC_HPPIR1_EL1
mrs x10, ICC_CTLR_EL3
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
b print_gic_common
print_gicv2:
/* Load the gicc reg list to x6 */
adr x6, gicc_regs
/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
ldr w8, [x17, #GICC_HPPIR]
ldr w9, [x17, #GICC_AHPPIR]
ldr w10, [x17, #GICC_CTLR]
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
print_gic_common:
/* Print the GICD_ISPENDR regs */
add x7, x16, #GICD_ISPENDR
adr x4, gicd_pend_reg
bl asm_print_str
gicd_ispendr_loop:
sub x4, x7, x16
cmp x4, #0x280
b.eq exit_print_gic_regs
bl asm_print_hex
adr x4, spacer
bl asm_print_str
ldr x4, [x7], #8
bl asm_print_hex
adr x4, newline
bl asm_print_str
b gicd_ispendr_loop
exit_print_gic_regs:
.endm
.section .rodata.cci_reg_name, "aS"
cci_iface_regs:
.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
/* ------------------------------------------------
* The below required platform porting macro prints
* out relevant interconnect registers whenever an
* unhandled exception is taken in BL31.
* Clobbers: x0 - x9, sp
* ------------------------------------------------
*/
.macro plat_print_interconnect_regs
adr x6, cci_iface_regs
/* Store in x7 the base address of the first interface */
mov_imm x7, (PLAT_ARM_CCI_BASE + SLAVE_IFACE_OFFSET( \
PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX))
ldr w8, [x7, #SNOOP_CTRL_REG]
/* Store in x7 the base address of the second interface */
mov_imm x7, (PLAT_ARM_CCI_BASE + SLAVE_IFACE_OFFSET( \
PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX))
ldr w9, [x7, #SNOOP_CTRL_REG]
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
.endm
#endif /* __ARM_MACROS_S__ */